• Magazine of the Korea Concrete Institute
• /
• v.6 no.1
• /
• pp.120-130
• /
• 1994

The purpose of this study is to propose the analytical model for the hysteretic behavior of Reinforced Concrete bearn-column joints under various loading history. Discrete line elernents , YVith inelastic rotational spring was adopted to consider the movement of plastic hinging zone influenced by the details of longitudinal reinforcements. Also hysteretic model was constructed by excluding such variables which can not be utilized in dynamic analysis of Reinforced Concrete. structure that it will be adoptable in two-dimensional inelastic frame ardysis with 6-DOF. From the analysis of previous test results, it was found that stiffness deterioration caused by inelastic hysteretic loadings can be predicted by the functron of basic pinching coefficients, ductility ratio.and yield strength ratio of members. Strength degradation coefficients were newly proposed to explain the difference of inelastic behavior of members caused by spacing ratio of transverse steel and sectlon aspect ratio. The energy dissipation capacities calculated using the analytical model proposed in thls paper show a good agreements w~lh test results by an error of 10~20%.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.479-484
• /
• 1999

본 연구에서는 사람의 턱 운동과 턱 사이에 작용하는 힘(혹은 압력)을 그대로 나타낼 수 있는 저작로봇을 개발하는 것을 궁극적인 목표로 한다. 이러한 저작로봇이 개발되면, 치과의사가 환자의 턱운동에 나타나는 병변을 진단하고 치료하는데 큰 도움이 될 것으로 사료된다. 또한 , 본 연구에 채택한 병렬기구(parallel mechanism)에대한 순기구학적( forward kinematics)분석은 일반적인 병렬기구의 실계에도 응용될 것으로 기대된다. 본 연구진이 1차적으로 설계한 모델은 베이스와 플랫폼(platform), 그리고 이 둘을 연결하는 3개의 다리로 구성되어 있다. 다리와 플랫폼은 3자유도의 관절로 다리와 베이스는 1자유도의 경첩 관절로 연결되어 있으며, 이 3개의 경첩 관절은 베이스 위의 수평면에서 직선을 따라 움직인다. 경첩 관절의 수평 변위와 세 다리의 길이가 주어졌을 때 플랫폼의 위치와 오리엔테이션을 구하는 순기구학의 해( 解)를 계산해내는 알고리즘을 개발하였다. 이 알고리즘의 특징은 매 순간 오차를 계산하여 이 오차가 줄어드는 방향으로 나아가도록 시간간격(time step)을 조절하는 것이다. 본 알고리즘은 현재 가장 보편적으로 사용되고 있는 뉴튼-렙슨 방법에 비하여 3가지 장점을 나타내고 있다. 우선 , 초기치(initial guess)에 관계없이 수렴한다는 것이다. 또한, 본 알고리즘은 뉴튼-렙슨 방법에 비하여 수렴속도가 훨씬 빠르며, 연산 시간이 매우 짧아져 실제적인 실시간 적용에 적합하다. 마지막으로, 뉴튼-렙슨 방법에서는 여러 개의 해 가운데 어느 곳으로 수렴할 지 예측 할수 없으나 본 알고리즘에서는 초기치에 가장 가까운 해로 수렴한다. 이러한 순기구학의 다중성(multiplicity)문제를 해결하기 위하여 두 개의 조건을 제시하였으며, 이를 적용한 시뮬레이션 결과에 의하면 항상 원하는 해(true solution)에 수렴할 수 있었다.발생량의 감소를 기대 할 수 있는 친환경기술로 유지관리비를 최소화할 수 있는 장점이 있었다. 않은 사람들 중 미래의 검진실행의지에 건강소식지가 영향을 미친 경우는 48.7%였다. 보건교육을 받은 후 유방암 자가검진 실천율은 사업군에서 53.9%로 받기 전의 27.3%보다 증가하였으나 대조군의 경우는 별 차이가 없었다. 연령별로는 60대가 가장 높았고 사업군에서 검진율의 증가분은 30대가 가장 컸다. 교육수준별로는 사업군은 고졸이, 대조군은 전문대졸이 가장 높았고 사업군에서 검진율의 증가분은 고졸에서 가장 컸다. 보건교육 후 유방암과 관련된 건강지식의 정도는 사업군이 3.7점으로 대조군보다 유의하게 높았으며, 유방암 자가검진법을 실천하는 사람들의 동기는 ‘일반 대중매체의 영향’이 가장 많았으며 건강소식지가 동기인 경우도 20.4%였다. 사업군에서 건강소식지가 유방암 자가검진법 실천에 영향을 미친 경우가 79.6%였으며 유방암 자가검진법에 관한 보건교육을 받고 실천하지 않은 사람들 중 미래의 실천의지에 건강소식지가 영향을 미친 경우는 43.6%였다. 이상의 소견에서 지역주민을 대상으로 인쇄매체를 통한 보건교육은 인쇄물만으로도 쉽게 실천 할 수 있는 유방암 자가검진법이 가장 효과적이었으며, 자궁암검진에 관해서도 검진을 받을 수 있도록 지역사회의 보건의료의 하부구조를 정비하여 제도적 장치를 마련하고 정보를 제공한다면 자궁암검진 실천율도 증가할 것이다.고 12.9% 의 발달율을 보여 유의적인 차이를 보이지 않았다. 이상의 결과로 보아 핵이식 수정란을 효율적으로 생산하기 위하여 수핵난자의 세포질에 ionomycin 과 DMAP 의 혼합처리로 탈핵난자의 활성화를 유도하는 것이 효율을 증진시킬 수 있었다고 본다. 또한 공핵수정란을 수정 후 90시간과 114시간 개별 배양하여 할구를 공핵체로 핵이식에 이용하였을 때도 그룹배양에 비하여 효율이 떨어지지 않음을 알 수 있었으며, 수정란의 할구

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.104-111
• /
• 2014

In this paper, we deal with robotic automation for assembling car brake modules. A car brake module is comprises of a torque member, two brake pads, and two pad liners. In the assembly process, brake pads and pad liners are needed to be inserted in a torque member. If we use a typical robotic hand for the assembly, task time takes too long. So, we propose two methods. The first method is to use an end effector that has five grippers capable of gripping five assembly parts. In the first method we attached the implemented end effector to a conventional 6 degrees of freedom industrial manipulator and performed the bake module assembly task. Experimental results show that the task time is remarkably reduced. The brake module assembly task needs the robot to change its orientation frequently, so, in the second method, we added one degree of freedom to the end effector that is used in the first method. By attaching it to a conventional 6 degrees of freedom industrial manipulator, we composed a 7 degrees of freedom redundant manipulator. A redundant manipulator has the advantage of flexible manipulation so the robot can change its orientation easily and can perform assembly task very fast. Experimental results show that the second method dramatically reduce whole task time for brake module assembly.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.259-265
• /
• 2016

The present study aims to design and utilize a model test system of a Caisson in wet towing condition, to assess towing stability of a 9,300 ton class caisson. The suggested towing system was designed to provide regular tension on the towline, whereas the previous model test system towed the model in constant speed. The new model test system was expected to reproduce the towing condition more realistically than the test system with constant speed condition, as the tugboat in actual towing condition tows the towline with constant power. Model tests were conducted in a towing tank with 1/30 scaled model. In the model tests, six-degrees-of-freedom motion of the caisson model and tension on the towline were measured and analyzed. By using the new system, fluctuation of the motion of model and tension on the towline decreased. The variation in the draft and initial trim was applied in the model tests. In the initial trim condition, the motion and towing force decreased.

• Journal of Plant Biotechnology
• /
• v.46 no.3
• /
• pp.189-204
• /
• 2019

In this study, we analyzed the changes in glucosinolate content and gene expression in TO1000DH3 and Early big seedling upon methyl jasmonate (MeJA) treatment. Analysis of glucosinolate contents after MeJA treatment at $200{\mu}M$ concentration showed that the total glucosinolate content increased by 1.3-1.5 fold in TO1000DH3 and 1.3-3.8 fold in Early big compared to those before treatment. Aliphatic glucosinolates, progoitrin and gluconapin, were detected only in TO1000DH3, and the changes in the content of neoglucobrassicin were the greatest at 48 hours after MeJA treatment in TO1000DH3 and Early big. The transcriptomic analysis showed that transcripts involved in stress or defense reactions, or those related to growth were specifically expressed in TO1000DH3, while transcripts related to nucleosides or ATP biosynthesis were specifically expressed in Early big. GO analysis on transcripts with more than two-fold change in expression upon MeJA treatment, corresponding to 12,020 transcripts in TO1000DH3 and 13,510 transcripts in Early big, showed that the expression of transcripts that react to stimulus and chemical increased in TO1000DH3 and Early big, while those related to single-organism and ribosome synthesis decreased. In particular, the expression increased for all transcripts related to indole glucosinolate biosynthesis, which is associated with increase in glucobrassicin and neoglucobrassicin contents. Upon MeJA treatment, the expression of AOP3 (Bo9g006220, Bo9g006240), TGG1 (Bo14804s010) increased only in TO1000DH3, while the expression of Dof1.1 (Bo5g008360), UGT74C1 (Bo4g177540), and GSL-OH (Bo4g173560, Bo4g173550, Bo4g173530) increased specifically in Early big.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.93-102
• /
• 2006

Control input's saturation of active control devices for large structures under large external disturbances are often occurred. It is more difficult to obtain the exact values of mass and stiffness as structures are higher. The modelling errors between mathematical models and real structures must be also included as parameter uncertainties. Therefore, in active vibration control of civil engineering structures like buildings and bridges, the robust saturation controller design method considering both control input's saturation and parameter uncertainties of system is needed. In this paper, stabilities of linear optimal controller LQR, modified bang-bang controller, saturated sliding mode controller, and robust saturation controller among various controllers which have been studied and applied to active vibration control of buildings are investigated. Especially, unstable phenomena of the LQR, the modified bang-bang controller and the saturated sliding mode controller when the control input is saturated or parameter uncertainties exist are presented to show the necessity of the robust saturation controller. The robust stability of the robust saturation controller are shown through a numerical example of a 2DOF linear vibrating system and an experimental test of the two-story structure with an active mass damper (AMD).

• The KIPS Transactions:PartB
• /
• v.15B no.5
• /
• pp.421-434
• /
• 2008

As computer graphics, virtual reality and augmented reality technologies have been developed, in many application areas based on those techniques, interaction for 3D space is required such as selection and manipulation of an 3D object. In this paper, we propose a framework for a vision-based 3D interaction which enables to simulate functions of an expensive 3D mouse for a desktop environment. The proposed framework includes a specially manufactured interaction device using three-color LEDs. By recognizing position and color of the LED from video sequences, various events of the mouse and 6 DOF interactions are supported. Since the proposed device is more intuitive and easier than an existing 3D mouse which is expensive and requires skilled manipulation, it can be used without additional learning or training. In this paper, we explain methods for making a pointing device using three-color LEDs which is one of the components of the proposed framework, calculating 3D position and orientation of the pointer and analyzing color of the LED from video sequences. We verify accuracy and usefulness of the proposed device by showing a measurement result of an error of the 3D position and orientation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.471-478
• /
• 2010

Thin films play an important role in many technological applications including microelectronic devices, magnetic storage media, MEMS and surface coatings. It is well known that a thin film's material properties can be very different from the corresponding bulk properties and thus there has been a strong need for the development of a reliable test method to measure the mechanical properties of a thin film. We have developed an alternative and convenient test method to overcome the limitations of previous membrane deflection experiment and uniaxial tensile test by adopting a white light interferometer having sub-nanometer out-of-plane displacement resolution. The freestanding aluminium specimens are tested to verity the effectiveness of the test method developed and get the tensile properties. The specimens are 0.5 rum wide, $1{\mu}m$ thick and fabricated through MEMS processes including sputtering. 1 to 5 specimens are fabricated on Si dies. The membrane deflection experiments are carried out by using a homemade tester consisted of a motor-driven loading tip, a load cell, and 6 DOF alignment stages. The test system is compact enough to set it up beneath a commercial white light interferometric microscope. The white light fringes are utilized to align a specimen with the tester. The Young's modulus and yield point stress of the aluminium film are 62 GPa and 247 MPa, respectively.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.479-485
• /
• 2010

To handle container effectively is one of the most important factors in a port because working time is linked soon into cost. Since the middle of 1990s, RMGC(Rail-Mounted Gantry Crane) and RTGC(Rubber-Tired Gantry Crane) have been developed and widely used to operate containers in the yard. The RTGC is more difficult than RMGC in the automatic control system design. Although, the RTGC is largely advantaged to free driving environment, it has some considerable disadvantages in the system operating. In general, the problems are due to tire slip and lack of tire pressure etc. Therefore, a desirable research result has not been shown in this time. So, in this paper, we propose a new approach to design tracking control system for the RTGC in which the mathematical modeling is included. From the simulation results, the control performance of the designed control systems is evaluated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.368-375
• /
• 2018

In the present study, aerodynamic load analysis for a floating off-shore wind turbine was conducted to examine the effect of periodic platform motion in the direction of 6-DOF on rotor aerodynamic performance. Blade-element momentum method(BEM) was used for a numerical simulation, the unsteady airload effects due to the flow separation and the shed wake were considered by adopting a dynamic stall model based on the indicial response method. Rotor induced downwash was estimated using the momentum theory, coupled with empirical corrections for the turbulent wake states. The periodic platform motions including the translational motion in the heave, sway and surge directions and the rotational motion in the roll, pitch and yaw directions were considered, and each platform motion was applied as a sinusoidal function. For the numerical simulation, NREL 5MW reference wind turbine was used as the target wind turbine. The results showed that among the translation modes, the surge motion has the largest influence on changing the rotor airloads, while the effect of pitch motion is predominant for the rotations.