• Progress in Medical Physics
• /
• v.19 no.2
• /
• pp.95-101
• /
• 2008

In this study, we observed the alteration of choline signal intensity in hippocampus region of the depressive rat model induced by forced swimming test (FST). The purpose of this study was to evaluate the antidepressant efficacy in the depressive animal model using MR spectroscopy. Fourteen experimentally naive male Sprague-Dawley rats weighting $160{\sim}180\;g$ were used as subjects. Drug injection group was exposed to the FST except for control group. The drugs were administered subcutaneously (SC) in a volume equivalent to 2ml/kg. And three injections were administered 23, 5, and 1h before beginning the given test. 1H MR spectra were obtained with use of a point resolved spectroscopy (PRESS) localization sequence performed according to the following parameters: repetition time, 2500 ms; echo time, 144 ms; 512 average; 2048 complex data points; voxel dimensions, $1.5{\times}2.5{\times}2.5\;mm^3$ ; acquisition time, 25min. There were no differences in NAA/Cr and Cho/Cr ratio between the right and the left hippocampus both normal control rats and antidepressant-injected rats. Also, no differences were observed in NAA/Cr and Cho/Cr ratio between the normal control rats and the antidepressant-injected rats both the right and the left hippocampus. In this study, we found the recovery of choline signals in the depressive animal model similar to normal control groups as injecting desipramine-HCl which was antidepressant causing anti-immobility effects. Thus, we demonstrated that MR spectroscopy was able to aid in evaluating the antidepressant effect of desipramine-HCl.

• Economic and Environmental Geology
• /
• v.4 no.4
• /
• pp.167-215
• /
• 1971

I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.51-60
• /
• 2011

The objective of this study was to suggest strategies for improving "Livestock Manure Treatment Systems and Related Technologies Assessment Program". Analytic Hierarchy Process (AHP) was used to evaluate reasonableness of applied weight value for assessment and improve program management strategies. Results of mail survey collected from animal manure treatment technology specialists of 30 companies nationwide were used for AHP. Company's ability, technological prowess, facility's convenience, economic feasibility are four important aspects of assessment program evaluation using AHP. More than 70% of the respondents said they were overall satisfied with the objectivity of assessment program regarding above four evaluation aspects. However, only 36% of them answered that they were very satisfied with the objectivity of assessment program in terms of economic feasibility. The evaluation results revealed that the assessment program needs to be made up for the weak points regarding economic feasibility. The AHP weight calculation results showed that the current assessment program overestimates the technological prowess, especially livestock manure treatment efficiency. It suggests that the weight value of current assessment program in terms of technological prowess needs to be determined carefully. The current assessment program combined with AHP weight value determination approach will be very useful to improve objectivity and reliability of assessment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.111-121
• /
• 2010

Purpose: This 3D-FEA study was performed to investigate the influence of marginal bone loss pattern around the implant to the stress distribution. Material and methods: From the right second premolar to the right second molar of the mandible was modeled according to the CT data of a dentate patient. Teeth were removed and an implant ($\Phi\;4.0{\times}10.0mm$) was placed in the first molar area. Twelve bone models were created; Studied bone loss conditions were horizontal bone loss and vertical bone loss, assumed bone loss patterns during biologic width formation, and pathologic vertical bone loss with or without cortification. Axial, buccolingual, and oblique force was applied independently to the center of the implant crown. The Maximum von Mises stress value and stress contour was observed and von Mises stresses at the measuring points were recorded. Results: The stress distribution patterns were similar in the non-resorption and horizontal resorption models, but differed from those in the vertical resorption models. Models assuming biologic width formation showed altered stress distribution, and weak bone to implant at the implant neck area seams accelerates stress generation. In case of vertical bone resorption, contact of cortical bone to the implant may positively affect the stress distribution.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.111-122
• /
• 2017

This study analyzes the current state of entrepreneurship education and start-up foundations by country in order to find ways to improve the domestic entrepreneurial environment and to promote the recognition of desirable entrepreneurship practices. It also investigates the relationship between entrepreneurship, entrepreneurial will, and the level of opportunity-based entrepreneurships, by using data from the 2016 Global Entrepreneurship Trend Report (GETR). First, the results show the urgent need for the expansion of entrepreneurship education in Korea. In the GETR category of 'experience of entrepreneurship education in elementary, middle and high schools', Korea was ranked very low (19th place), among the 20 countries. In the 'college' and 'lifelong entrepreneurship education' categories, it procured a mid-level ranking (15th). While entrepreneurship education for all ages is being promoted globally, entrepreneurship education for middle-aged individuals in Korea is relatively weak. This implies that the expansion of entrepreneurship education to lifelong education and education for employees and retirees is required. Second, the individual's entrepreneurial intention in Korea was 3.8 points, implying a mid-level ranking (15th), and it ranked the lowest in terms of opportunity-based entrepreneurship (20th). In comparison to China (4.55) and the United States (4.01), the entrepreneurial intention of Koreans was found to be low. The level of opportunity-driven entrepreneurship was also found to be very low, compared to China (4.35), Japan (4.04) and the United States (4.59). In general, the proportion of the level in opportunity-driven entrepreneurship, increases from the factor-driven and efficiency-driven, to the innovation-driven type. In Korea, the percentage of entrepreneurial ventures centered around involuntary entrepreneurship and small businesses is high. It is also interpreted that opportunity-based entrepreneurships are low in number because of this high proportion of involuntary start-up and small businesses. Last, the entrepreneurial intention in all types (factor-driven, efficiency-driven, and innovation-driven) was exceptionally high. It has been confirmed that exposure to all entrepreneurship education (elementary, junior high, university, and lifelong education) in innovation-driven countries, greatly increases entrepreneurial intention. In the case of Korea, which is an innovation-driven country, qualitative improvement based on quantitative expansion of entrepreneurship education is expected to be a major driving force for individuals' entrepreneurial intention to obtain a mid-level ranking (15th).

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.17-32
• /
• 1996

It is important to understand the operating mechanism and force system of fixed appliance that most effective for individual tooth movement in various orthodontic appliances. The archwire system of fixed appliance is devided into 3 types, which is continuous arch, segmented arch and sectional arch. The last two types have longer interbracket distance and simple force operating points, so it is easy to control force system by operator. But the continuous arch has shorter interbracket distance and various bracket geometry, so it is hard to control and anaylze the force system. The purpose of this study was three dimentional force and moment analysis of continuous arch system by finite element method, which is similar situation to three dimentional elastic beam in structural engineering. Several sample form of various bracket geometry and artificial lower crowding typodont made by author were constructed, analyzed and compared each other. The results were as follows : 1. The force magnitude is linear proportional to the degree of displacement or tilting of the bracket. 2. The force magnitude is inversely non-linear proportional to the interbracket distance. 3. In three dimensional typodont model, while the force can be compared with that of the sample form in the area where adjacent bracket geometry is simple, the force is much more than the expected value in the area where adjacent bracket geometry is complex.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.59-68
• /
• 2015

It's important to analyse effects of word of mouth for making its impact higher in performance of motions pictures. And it's required to combine variety sales activities like free gift, promotion goods and price discount with word of mouth for the box office of film. The purpose of this study is to compare between groups classified by demographic characteristic into effects from word of mouth and methods of sales promotion in intention of watching film. On the other hand existing studies on sales activity and word of mouth were one-sided in theoretical background, a meaning of this study is theorizing a social phenomenon about sales promotion of movie giving actual examples that currently are effected by production company, Movie theaters, distribution company and affiliated company. For this purpose, it conducted a survey targeting 500 students in B university in Seoul city and 379 answers got received, and it proceeded this study with 369 answers except 10 inaccurate ones. Creating questionnaires with Likert 5 point scale, it decided that case of substantial inclination was 5 points and inverse one is 1 point. Doing analysis T and ANOVA according to male and female, kinds of major study and number of average monthly watching movie, it analysed the test results after comparison analysis between classified group. The results are summarized as follows: First, offering premiums is more effective by masculine than feminine, but situation of free gift is an opposite result. Second, there are no differences of effects word of mouth and methods of sales promotion by majority departments. Third, there are much differences between groups classified by average number of watching film in a month into effects from word of mouth and methods of sales promotion. Group of watching film more 3 times in a month is more effective than the other groups in intension of watching film by word of mouth. Fourth, word of mouth is great factor to increase intention of watching film and second one is discount on the price.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.62-79
• /
• 2020

The rock-carved seated Avalokiteśvara statue at Ganghwa Bomunsa Temple is a giant rock-carved Buddhist statue that was built in 1928 during the Japanese colonial era. Although it is a year-recorded Buddhist statue that occupies a prominent place in modern Korean Buddhist sculpture history, it has not been the subject of in-depth discussion due to weak research on modern Buddhist sculptures. In this study, to examine the various significant aspects of the rock-carved Seated Avalokiteśvara statue at Bomunsa Temple as a modern Buddhist sculpture, I have managed to determine its construction year, artificers, and patrons by deciphering the inscription around the rock-carved statue; in addition I have researched the effects of the rock shapes and landforms on the formation of the Buddhist statue by comparing and analyzing the points of view of both artificers and worshipers. I have also identified the specific circumstances of the time of construction from interviews with the descendants of artificers. A monk from Geumgangsan Mountain, Lee Hwaeung, took the role of sponsor and chief painter to construct the rock-carved seated Avalokiteśvara statue at Bomunsa temple. In the beginning of its construction in 1928, more than 100 donators jointly sponsored the construction of the statue. Gansong Jeon Hyoungphil sponsored alone at the time of the place of worship's expansion in 1938. Bomunsa Temple has been regarded as one of the top-three sacred places of Avalokiteśvara Bodhisattva together with Naksansa Temple in Yang Yang and Boriam in Nam Hae, due to the construction of the rock-carved statue. It took about three months to construct the statue. Lee Hwaeung drew a rough sketch and then Un Songhag and five masons from Ganghwa Island took part in the carving process. We can observe the line drawing technique around the rock-carved statue because the statue was carved based on the rough sketch of the monk painter. The aspect of Lee Hwaeung as a painter is revealed; therefore, we can identify the clue of painting pattern leading to Seogongchulyou- Hwaunghyoungjin- Ilonghyegag. The rock-carved seated Avalokiteśvara statue at Bomunsa Temple is a typical Avalokiteśvara that wears a jeweled crown and holds Kundica. It makes a strong impression as it has a big square-shaped face and a short neck and is unsophisticated in general. The artificers solved the issue of visual distortion of the rock-carved statue caused by carving on a 10-meter high and 40-degree sloping rock by controlling motion to its maximum, omitting detailed expression by emphasizing symmetry, and adjusting the head-to-body proportion to be almost one-to-one. In this study, especially, I presume the unified form of sacred sculptures and Buddhist altars, without making a Buddhist altar like the rock-carved seated Avalokiteśvara statue at Bomunsa Temple, to be a key characteristic of modern Buddhist sculptures. Furthermore, I make newly clear that the six letters of Sanskrit carved on nimbus, which had been interpreted as a Six-Syllable Mantra, are a combination with Jeongbeopgye and Sabang Mantras. In addition, three iron rings driven on eaves rock were used as a reference point, and after construction they were used as a decoration for the Bodhisattva with hanging wind chimes.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.284-291
• /
• 2007

Purpose : Theophylline has recently been reported to have concurrent anti-inflammatory effects at low therapeutic plasma concentrations which are below the doses at which significants, clinically useful bronchodilatation is evident. Sustained-release formulation in capsule and dry syrup forms were developed to reduce its adverse effects and improve its clinical effects. We compared the therapeutic effects of theophylline dry syrup and capsules in children with mild asthma. Methods : Ninety children with mild asthma were randomized to receive either theophylline dry syrup (n=44) or theophylline capsules (n=46); 4 mg per kilogram of body weight, twice a day, for 12 weeks. Baseline and serial measurements of daytime and nighttime asthma symptom score were performed. Compliance scores, drug swallowing scores, and drug usability scores were measured every 4 weeks. Each scoring was rated on a scale of 0-4. Serum theophylline concentration were measured at 4 and at 12 weeks. To examine the anti-inflammatory effect of theophylline on asthma, Serum eosinophilic cationic protein as a marker of airway inflammation caused by eosinophil was measured 12 weeks pre- and post-administration. Results : The daytime and nighttime asthma symptom scores of the two groups after 4 weeks significantly improved over the baseline score. Daytime and nighttime asthma symptom scores in the dry syrup group were statistically lower at all time points except for the nighttime symptom scores at 4 weeks. Compliance scores, drug swallowing scores, and drug usability scores in the dry syrup group were significantly higher at the end time point. Only in the dry syrup group was the serum ECP at the end time point statistically lower than baseline. Conclusion : Low-dose sustained-release theophylline may be safe and effective in bronchial asthma and this effect may be mediated by its anti-inflammatory action mechanisms. Especially, when used in children with asthma, dry syrup formulation is recommended because of its higher compliance than capsule formulation.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.615-622
• /
• 2016

The 18~20G needle is used to computer tomography (CT) contrast examination. Therefore, a patient has to apply a self-administering hemostasis (conventional method: CM) and often experience bleeding in the course. Thus, we developed the new disposable transparent tourniquet (TT) for reducing. This study was to compare the usefulness between the proposed transparent tourniquet and the existing hemostatic methods. A Satisfaction survey was conducted by 50 patients and 25nurses. The survey contained the satisfaction of the convenience, safety, sanitation, and wearing sensation of transparent tourniquet. We employed face-to-face interview on 5 points likert scales. And Chi-square, paired T-test were used for the statistics verification. As for the patients, the satisfaction levels were measured for each category with the gender, age. Patients evaluation, overall satisfaction high average sore used TT and there were statistical significance by paired T-test(p<0.05). The following is the average satisfaction level for each category: $4.4{\pm}0.53$ in; $4.28{\pm}0.57$ in safety; $4.52{\pm}0.54$ in sanitation; $4.16{\pm}0.54$ in wearing sensation. So the overall satisfaction level is measured at $4.34{\pm}0.51$. As for the nurses, CT work experience and the current satisfaction with tourniquet were counted as variables. The satisfaction level for each category is: $3.8{\pm}0.7$ in; $3.6{\pm}0.68$ in safety; $3.4{\pm}0.5$ in sanitation; $3.9{\pm}0.49$ in hemostasis. The overall satisfaction level is $3.8{\pm}0.3$. Patients' satisfaction levels were very high with little difference among variables. Nurses' satisfaction levels were different with the TT depending on their work experience but their overall satisfaction was high. This TT will be a starting point to minimizing patient's inconvenience and more studies are necessary to enhance their satisfaction.