• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.110-111
• /
• 2019

본 논문은 자동차 쿨링팬용 스위치드 릴럭턴스 전동기(이하, SRM) 설계 및 성능 비교에 관한 논문으로 기존의 유니버설 및 브러쉬리스 전동기를 대체하기 위해 3상 6/4극 및 12/8극 그리고 4상 8/6극 SRM을 설계하였으며 성능을 비교를 통해 적용 및 대체 가능성을 검증하였다. 각 구조의 성능은 시뮬레이션을 통해 성능을 예측하였으며 예측된 성능을 시험을 통해 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.254-258
• /
• 2004

A three-phase 6/8 structure SRM (switched reluctance motor), the design and analysis of the motor are described. The range of the stator pole arc factor and the rotor pole arc factor of the motor are analyzed in the linear region. The optimum range of the stator pole arc factor and the turn-off angle of the main switches in the power converter are given with the 2-D finite element electro-magnetic field calculation of the motor and the nonlinear simulation. Test results of the prototype developed are discussed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.671-676
• /
• 2003

This paper presents 3-phase current regulation of SR motor by only single current sensor. The conventional drive system of SR motor has a current sensor per each phase. In this paper, The asymmetric bridge converter which Is able to control independently phases and be excited simultaneously is used fs the driver system for 6/4 poles SR motor. And the sensor Is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. A drive logic circuit is designed on EPLD with Delta modulation using a fixed frequency This technique is verified through simulation and experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.182-185
• /
• 2004

This paper shows a characteristics analysis of Switched Reluctance Motor(SRM) for design optimization. The static and dynamic characteristics are analyzed by simulation case of 6/4 and 12/8 pole machine. The torque, efficiency and acoustic noise are tested to compare drive performances.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.30-38
• /
• 2010

This study was conducted to determine the potential applicability of slowly released molasses (SRM) to treat nitratecontaminated groundwater. SRM was made by dispersing molasses in hydroxy propyl methyl cellulose-silicamicrocrystalline cellulose matrix. Column test indicated that SRM could continuously release molasses with slowly decreasing release rates of $64.6mg-COD/L{\cdot}h$ up to 65 hrs, $12.1mg-COD/L{\cdot}h$ up to 215 hrs, and $4.4mg-COD/L{\cdot}h$up to 361 hrs. A batch test using an isolated indigenous heterotrophic denitrifier Pseudomonas sp. KY1 having nitrite reductase (nirK) and liquid molasses demonstrated that the bacterium decreased 100 mg-N/L of nitrate to less than 10 mg-N/L at the C/N ratio of 10/1 in 48 hours. In a Pseudomonas sp. KY1-attached Ottawa sand column which continuously received molasses from a SRM-containing reservoir, the bacterium successfully removed nitrate from 20 mg-N/L to 3 mg-N/L during the 361 hours of column operation. The results showed the possibility that SRM can be used as a reliable, longterm extra carbon source for indigenous heterotrophic denitrifiers.

• 조명전기설비학회논문지
• /
• 제25권1호
• /
• pp.59-63
• /
• 2011

In small-power applications, variable-speed motors having high efficiency and controllability become more dominant than brushed DC motors. BLDC motors with permanent magnets in the rotor and SRMs directed by reluctance torque due to no permanent magnets have been strongly studied as a candidate. Compared to the BLDC motors, SRMs are more suitable for low-cost applications since the magnetic structure is simple, mechanically robust, and cheap due to no additional excitation in the rotor such as copper wire, aluminum, and permanent magnets. In addition, relatively small number of phases in single and two-phase SRMs allows more cost savings with regards to material in the motor and switching devices in the converter. In this paper, several 2 phase SRMs are compared to a 3 phase 6/4 SRM in terms of flux distribution in key parts of the motors.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.63-68
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental-encoder is used to detect a poor position. But, it is not desirable to use a high priced encoder and high efficient microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, Only using the reflective type 2 photosensors replace the conventional opto interrupter and slotted disk, which not only remove a slotted disk section but drive 3-phase 6/4 SRM bidirectionally. Moreover, as control circuit only is composed of common analog device economy is maximized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.850-851
• /
• 2008

This paper compares and investigates the vibration and noise characteristics through simulations of 12/8 and 6/4 switched reluctance motors (SRMs). The radial force which is the main source of vibration is computed from two-dimensional(2D) transient magnetic finite element analysis (FEA) and compared in both time and frequency domain. At the same output power, the radial force of 6/4 SRM is found to be more than two times as that one of 12/8 SRM. Three-dimensional structural finite-element analysis (3D FEA) is used to study the mechanical characteristics. It can be concluded from static structural analysis that the maximum total deformation could be reduced to 1/26 if the motor is designed with 12/8 structure instead of 6/4. The dominant vibration modes are verified by modal analysis.

• 통합자연과학논문집
• /
• 제8권3호
• /
• pp.176-183
• /
• 2015

Corticotropin-releasing actor receptors (CRFRs) activates the hypothalamic pituitary adrenal axis, one of the 2 parts of the fight or flight response to stress. Increased CRH production has is associated with Alzheimer's disease and major depression and hypoglycemia. In this study, we report the important structural and chemical parameters for CRFR inhibitors using the derivatives of 8-substituted-2-aryl-5-alkylaminoquinolines. A 3D QSAR study, Comparative molecular field analysis (CoMFA) was performed. The best predictions were obtained for the best CoMFA model with a $q^2$ of 0.607 with 6 components and $r^2$ of 0.991. The statistical parameters from the generated CoMFA models indicated that the data are well fitted and have high predictive ability. The contour map resulted from the CoMFA models might be helpful in the future designing of novel and more potent CRFR derivatives.

• 분석과학
• /
• 제18권6호
• /
• pp.559-567
• /
• 2005

최근 관심이 되고 있는 혈액 중 다이옥신 분석방법을 마련하기 위해 미국 NIST의 혈청 인증표준물질 1589a를 이용하여, 캐나다, 일본 등 선진국의 혈액 중 다이옥신 분석방법을 비교 검토하고, 우리나라 실정에 적합한 혈액 중 다이옥신 분석방법(안)을 제시하였다. 제안된 분석방법은 추출과정에서 유분 등 지방의 효과적인 제거를 위한 알칼리 분해 추출 후 기존의 다이옥신 전처리방법과 유사한 방법으로 정제하여 두 종류의 컬럼을 사용하는 분석방법이다. 또한, 혈청 인증표준물질과 실제 혈액시료에 제안된 분석방법을 적용한 결과 정량한계는 사염화물(TeCDD/DF) 및 오염화물(PeCDD/DF)이 1 pg/g-lipid, 육염화물(HxDD/DF) 및 칠염화물(HpCDD/DF)이 2 pg/g-lipid 그리고 팔염화물(OCDD/DF)이 4 pg/g-lipid이며, 검량용 표준물질은 검출 농도를 고려하여 $CS_L$(0.1~1), $CS_1/2$(0.25~2.5), $CS_1$(0.5~5.0), $CS_2$(2~20) 및 $CS_3$(10~100)로 제시하였다.