• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.376-385
• /
• 1987

본 연구에서는 평면응력 파괴인성치의 거동에 관한 일련의 연구로서 위와 같 은 점을 고려하여 얇은 두께의 시험편을 이용하여 z의 변화에 대한 평면응력 파괴인성 치와 J저항곡선을 실험적으로 고찰하였으며 크랙성장을 고려한 J적분식도 검토하였다. 크랙길이는 하중제거 컴플라이언스법에 의하여 구하였고, ASTM E813의 방법으로J= .sigma.$_{f}$ .DELTA.(2ａ)인 크랙둔화선과 J저항곡선의 교점에서 구한 J적분값을 J$_{c}$로 정 의하였다. 또한, 재료를 변형경화재료로 가정하여 HRR응력변형율장의 특성을 이용 하여 J적분값을 구한 후 실험치와 상호 비교 검토하였다.이때 입력자료는 실험치의 그것과 동일하게 하였다. 동시에 z의 변화에 대한 T의 변화도 함께 고찰하였다.다.

• 한국항행학회논문지
• /
• 제25권3호
• /
• pp.248-255
• /
• 2021

2013년 7월 아시아나 OZ 214편 샌프란시스코 국제공항 (SFO) 사고의 주요 원인은 조종사의 잘못된 접근 조작과 항공기 오토트로틀 홀드(autothrottle hold) 모드로 인해 자동 속도 컨트롤(control)이 불가함을 인지 못하였고, 복행 (go-around) 결심이 늦었다는 것이다. 이와 관련하여 B777 POM (pilot operation manual)에는 FAF (final approach fix) 후 FLCH (flight level change) 모드 사용을 제한하고 있다. 본 연구는 QAR (quick access recorder) 데이터 분석 시스템을 활용하여 국내 항공사의 B777 기종에서 2년간 발생한 44건의 해당 이벤트를 분석 한 결과, 정상 강하각 보다 높은 위치에서 조종사가 FLCH 모드를 이용하여 급하게 강하하는 과정에서 해당 이벤트들이 주로 발생하였으며, 항공기 베이스 선회 (base Turn) 시 정상 수직 경로(vertical path)보다 낮은 상태에서도 FLCH 모드를 지속 사용한 예도 있었다. 아울러 공항의 표고가 500 ft 이상의 높은 공항에서 이벤트 발생율이 높은 점을 확인하였다. 이에 본연구에서는 항공기 접근 시의 강하 계획(descent planning), 수직 경로(vertical path) 모니터링의 중요성과 자동항법장치 사용 기준 및 안정 접근 항목(stabilized approach criteria)의 준수로 이벤트 경감방안 마련의 시사점을 도출하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.201-202
• /
• 2009

ZnO:Al transparent conductive films for solar cells were deposited on the glass substrates at room temperature by facing target sputtering (FTS) method. The sputtering targets were 100 mm diameter disks of 2w.t..%. AZO and Zn metal. ZnO:Al thin films were deposited as a function film thickness. A base pressure was $2{\times}10^{-6}$torr, and a working pressure was 1mTorr. The properties of thin films on the structural, electrical and optical properties of the deposited films were investigated using a four-point probe (Chang-min), an X-ray diffraction (Rigaku), a Hall Effect measurement (Ecopia), an UV/VIS spectrometer (HP) and a $\alpha$-step (Tencor). The lowest resistivity of film was $5.67{\times}10^{-4}[{\Omega}-cm]$ at 500nm. The average transmittance of over 80% was seen in the visible range.

• 상하수도학회지
• /
• 제9권4호
• /
• pp.97-106
• /
• 1995

An improving example for traditional rapid mix system was studied in the base of mechanisms of alum coagulation. Local status of the major water treatment plants was also investigated and evaluated for upgrading these plants. A new design and operating criterium for rapid mix system was proposed to velocity gradient, G of $1,000-1,500sec^{-1}$ and detention time, t of 1 sec from the results of experiments and literature reviews. Comparing the present rapid mix system to this criterium, apparent difference existed between them. In this study, for improving Seongnam water treatment plant, a design criterium of velocity gradient, and detention time was set to $1,100sec^{-1}$, 1 sec, respectively. A new rapid mix system adopted the nozzle injection countcurrently cross the inlet pipe to the whole area. The injection velocity was 17m/s, nozzle diameter was 1.0mm, and number of nozzle was 70. The new modified system without running present four 75 HP agitators was able to improve water quality(based on sedimentation effluent) by 15-35% and to reduce electrical energy by 98%.

• 연구논문집
• /
• 통권22호
• /
• pp.115-125
• /
• 1992

Mechanical properties and microstructure were investigated on vacuum induction melted $Fe_3A1$base alloys of $DO_3$ structure. Specal emphasis were put on the effect of alloy chemistry, grain size and process(rolling, directional solidification) on mechanical properties of Fe-22.5-39at.%Al at elevated temperature between room temperature and $800^{\circ}C$. grain size of as-cast alloys is refined by rolling from 1mm to $80\mum$. Tensile strength of Fe-24.lat.%AI was about 404MPa at the critical ordering temperature, and the fracture strain of the alloy was 1-2% at room temperature. An inverse temperature dependence of the strength is noticed as-cast $Fe_3A1$. The presence of Cr and Zr do not affect the room temperature ductility and high temperature strength. Fracture strain of directionally solidified(DS) $Fe_3A1$ is about 1%at room temperature, but is about 60%at. $T_C$(550^{\circ}C)$. Tensile strength of DS alloy is lower than that of as-cast alloy at $530^{\circ}C$ and $430^{\circ}C$. Failure mode at room temperature varies from transgranular fracture to intergranular fracture with the addition of Al. the failure mode also varies from mixed(transgranular+ intergranular) mode between room temperature and $500^{\circ}C$ to intergranular mode above $550^{\circ}C$

• 한국식품과학회지
• /
• 제31권3호
• /
• pp.638-643
• /
• 1999

본 연구에서는 영양음료 base를 제조할 때 단백질 급원으로 분기대두단백질(soy protein isolate; SPI)과 sodium caseinate를 혼합비를 달리하여 5종의 시료를 제작하였고 각각의 유동특성을 조사하였으며 그 결과는 다음과 같다. $20^{\circ}C$에서 전단속도를 $0\;sec^{-1}$에서 $500\;sec^{-1}$까지 변화시킬때, SPI 비율이 커질수록 시료는 newtonian 유동특성에서 pseudoplastic 유동특성으로 변화되고 비율이 더욱 커짐에 따라 항복력을 동반한 bingham pseudoplastic 유동특성으로 전환되었다. 이는 SPI의 농도가 높아질수록 전체 조직 중 progel의 형성이 많아지고 이것이 유동특성에 변화를 주었기 때문이라고 사료된다. 유동특성과 온도의 관계를 알기 위하여 각 시료를 온도변화에 따라서 겉보기 점도 $(log{\eta}_{app})$와 1/T의 관계를 도시한 결과 겉보기 점도는 모든 시료가 $250\;sec^{-1}$의 전단속도에서 온도가 증가함에 따라 감소되는 경향을 보였으며 SPI의 첨가량이 많은 시료일수록 감소폭이 크게 나타났다. Ea (활성화에너지)는 SPI의 비율이 늘어남에 따라 증가하는 $(0.8035{\sim}1.5947{\times}10^4\;J/kg{\cdot}mol)$ 결과가 나타났다. 이는 SPI의 비율이 높은 시료는 열처리 공정 후 progel화 된 SPI의 함량이 상대적으로 많아지고 이에 따라 겉보기 점도가 증가하고 유동 활성화에너지 외에 분자간 회합등을 절단하는데 소요되는 구조 활성화에너지가 필요하였기 때문이라고 사료된다. 겉보기 점도와 시간의존성의 관계에서는 SPI의 비율이 일정수준 이상일 경우 hysteresis loop를 관찰하였고 전단응력의 변화에 따라 조직붕괴가 심해져 결과적으로 시료의 유동특성이 크게 변함을 알 수 있었다.

• 한국농공학회논문집
• /
• 제47권1호
• /
• pp.79-91
• /
• 2005

Wetland systems are widely accepted natural water purification systems around the world in nonpoint sources pollution control. Constructed wetlands have become a popular technology for treating contaminated surface and wastewater. In this study, the field experiment to reduce nonpoint source pollution loadings from polluted stream waters using wetland system was performed from June 2002 to March 2004, including winter performance using four newly constructed wetlands. The Dangjin stream water flowing into Seokmun estuarine lake was pumped into wetlands, and inflow and hydraulic residence time of the system was $500m^{3}{\~}1500m^{3}/day\;and\;2{\~}5$ days respectively. After 3 years operation plant-coverage was about $80~90\%$ from zero at initial stage even with no plantation. Average water quality of the influent in growing season was BOD_{5}\;3.96mg/L$, TSS 22.98 mg/L, T-N 3.29 mg/L, T-P 0.30 mg/L. The average removal rate of four wetlands for $BOD_{5},\;TSS,\;T-N\;and\;T-P$ in growing season was $24\%$, $62\%$, $54\%$, and $51\%$, respectively. And average water quality of the influent in winter season was $BOD_{5}$ 4.92 mg/L, TSS 12.47 mg/L, T-N 5.54 mg/L, and T-P 0.32 mg/L, respectively. The average removal rate of four wetlands for them was $-21\%$. $23\%$, $33\%$, and $53\%$, respectively. The reason of higher BOD_{5} effluent concentration in winter season might be that low temperature restrained microorganism activity and a organic body from the withered plant and algae was flown out. Except the result of $BOD_{5}$, the effectiveness of water quality improvement in winter season was satisfactory for treating polluted stream waters, and $BOD_{5}$ variation was within the range of background concentration. Performance of the experimental system was compared with existing data base (NADB), and it was within the range of general system performance. Overall, the wetland system was found to be satisfactory for NPS control such as improvement of polluted stream water.

• Radiation Oncology Journal
• /
• 제31권3호
• /
• pp.118-124
• /
• 2013

Purpose: The optimal treatment of advanced maxillary sinus cancer has been challenging for several decades. Intra-arterial chemotherapy (IAC) for head and neck cancer has been controversial. We have analyzed the long-term outcome of neoadjuvant IAC followed by radiation therapy (RT) and surgery. Materials and Methods: Twenty-seven patients with advanced maxillary sinus cancer were treated between 1989 and 2002. Five-fluorouracil (5-FU, $500mg/m^2$) was infused intra-arterially, and followed by RT (total 50.4 Gy/28 fractions). A planned surgery was performed 3 to 4 weeks after completion of IAC and RT. Results: At a median follow-up of 77 months (range, 12 to 169 months), the 5-year rates of overall survival in all patients were 63%. The 5-year rates of overall survival of stage T3/T4 patients were 70.0% and 58.8%, respectively. Seven of fourteen patients with disease recurrence had a local recurrence alone. The 5-year actuarial local control rates in patients with stage T3/T4, and in all patients were 20.0%, 32.3%, and 27.4%, respectively. Overall response rate after the completion of IAC and RT was 70.3%. During the follow-up, seven patients (25.9%) showed mild to moderate late complications. The tumor extent (i.e., the involvement of either orbit and/or base of skull) appeared to be related with local recurrence. Conclusion: Neoadjuvant IAC with 5-FU followed by RT and surgery may be effective to improve local tumor control in the patients with advanced maxillary sinus cancer. However, local failure was still the major cause of death. Further investigations are required to determine the optimal treatment schedule, radiotherapy techniques and chemotherapy regimens.

• 한국농림기상학회지
• /
• 제24권1호
• /
• pp.1-12
• /
• 2022

본 연구는 국내 중요 밀원식물인 피나무가 주로 자생하는 산악 지역에서 개화시기를 예측하기 위해 수행되었다. 이를 위해 가리왕산 일대 해발 638m 지점 기준목에서 개화 진행을 모니터링 하고, 고도별 개화율을 관찰하였다. 또한 문헌자료, 웹자료, 개화 판별이 가능한 표본자료들을 수집하였다. 이 자료들을 이용하여 고도와 위도에 따른 개화기 변화를 확인하였다. 또한 누적 GDD를 이용하여 누적 개화율 모델을 개발하였다. GDD 계산은 5 ℃의 기준온도와 일별 최고, 최저 온도를 이용하였다. 일일 온일도를 1월 1일부터 누적할 경우 피나무 개화기는 860~1198 DD로 추정되었다. 이 결과는 산림양봉이 이루어지는 산악지역에서 개화기 예측과 채밀 가능기간을 추정에 도움을 줄 수 있을 것으로 판단된다.

• 전력전자학회논문지
• /
• 제24권6호
• /
• pp.411-418
• /
• 2019

Light-triggered thyristors (LTTs) are essential components in high-power applications, such as HVDC transmission and several pulsed-power applications. Generally, LTT fabrication includes a deep diffusion of aluminum as a p-type dopant to form a uniform p-base region, which needs careful concern for contamination and additional facilities in silicon semiconductor manufacturing factories. We fabricated 4-inch 5,000 V LTTs with boron implantation and diffusion process as a p-type dopant. The LTT contains a main cathode region, edge termination designed with a variation of lateral doping, breakover diode, integrated resistor, photosensitive area, and dV/dt protection region. The doping concentration of each region was adjusted with different doses of boron ion implantation. The fabricated LTTs showed good light triggering characteristics for a light pulse of 905 nm and a blocking voltage (V_DRM) of 6,500 V. They drove an average on-state current (I_TAVM) of 2,270 A, peak nonrepetitive surge current (I_TSM) of 61 kA, critical rate of rise of on-state current (di/dt) of 1,010 A/㎲, and limiting load integral (I²T) of 17 MA²s without damage to the device.