• 한국자기학회지
• /
• 제3권4호
• /
• pp.269-276
• /
• 1993

Co/Pd 다층박막에서 두 sublayer의 층수비($n_{Co}/n_{Pd}$ = 1/4, 2/4, 3/4, 5/4), 기판온도 ($실온,\;100,\;150,\;200\;^{\circ}C$)를 달리하는 시료를 열진공 증착방법으로 제작하고 이에 대한 Hall 이력곡선을 측정하였다. 이때 나타나는 다야한 형태의 이력곡선을 Co와 Pd sublayer의 자화에 의한 transverse Hall effect 항과 magnetoresistivity 항이 중첩된 것으로 보고 이를 최적 fiting 방법으로 분해하였다. 이 결과 시료 전체의 계면 영역에 걸쳐 강자성과 반강자성인 두 자화상태가 공존하며 이들의 exchange anisotropy의 크기와 반강자성 물질에 의한 강자성 물질의 자벽 고착 효과에 따라 uniaxal 또는 unidirectional easy axis 형의 Hall 이력곡선을 형성하는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.145-157
• /
• 2014

This study aimed to investigate the fatigue crack growth behavior of a kind of fiber metal laminates (FML) under four different stress levels. The FML specimen consists of three 2024-T3 aluminum alloy sheets and two layers of glass/epoxy composite lamina. Tensile-tensile cyclic fatigue tests were conducted on centrally notched specimen at four stress levels with various maximum values. A digital camera system was used to take photos of the propagating cracks on both sides of the specimens. Image processing software was adopted to accurately measure the length of the cracks on each photo. The test results show that: (1) a-N and da/dN-a curves of FML specimens can be divided into transient crack growth segment, steady state crack growth segment and accelerated crack growth segment; (2) compared to 2024-T3 aluminum alloy, the fatigue properties of FML are much better; (3) da/dN-${\Delta}K$ curves of FML specimens can be divided into fatigue crack growth rate decrease segment and fatigue crack growth rate increase segment; (3) the maximum stress level has a large influence on a-N, da/dN-a and da/dN-${\Delta}K$ curves of FML specimens; (4) the fatigue crack growth rate da/dN presents a nonlinear accelerated increasing trend to the maximum stress level; (5) the maximum stress level has an almost linear relationship with the stress intensity factor ${\Delta}K$.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1097-1103
• /
• 1988

본 연구에서는 이 좁은 벤트내에 자료가 모이는 피로균열의 특성을 이용하여 표면피로균열의 성장거동을 파괴역학적으로 해석, 연구하여 균열의 성장특성과 $S-N_{f}$ 곡선의 추정을 마이크로 컴퓨터로 계산하였다.

• 대한수학회보
• /
• 제59권5호
• /
• pp.1105-1117
• /
• 2022

In this paper, we obtain a second main theorem for holomorphic curves and moving hyperplanes of Pⁿ(C) where the counting functions are truncated multiplicity and have different weights. As its application, we prove a uniqueness theorem for holomorphic curves of finite growth index sharing moving hyperplanes with different multiple values.

• Applied Biological Chemistry
• /
• 제35권2호
• /
• pp.132-138
• /
• 1992

Methylisothiocyanate에 의한 단백질의 아미노산 배열 결정시 순차적으로 분리되어 나오는 methylthiohydantion 아미노산을 기체 크로마토그라피로 효과적으로 정성 및 정량하기위하여 새로운 silylating reagent인 N-methyl-N-(tert.-butyldimethylsily)trifluoroacetamide를 사용하여 N-tert.-butyldimethylsily MTH 유도체로 silylation 한 후 HP-1 capillary column으로 분석하였다. Cystine을 제외한 21개의 단백질 구성 아미노산을 동정할 수 있었고 지금까지 packed column에서 TMS 유도체로 동정할 수 없었던 arginine도 분리 동정되었다. 2개 이상의 peak를 나타낸 것으로는 hydroxyproline, proline, isoleucine, glycine 및 tyrosine이었고 이중 hydroxyproline은 많은 수의 peak들로 분리되었다. Lysine, histidine 및 arginine은 주입량 $5.0\;nmole{\sim}15.0\;nmole$의 범위에서 나머지는 $2.5\;nmole{\sim}7.5\;nmole$의 범위에서 상관관계를 측정한 결과 고도의 직선 상관관계를 나타내었다(p<0.001). TMS 유도체에 의한 분석은 많은 불순 peak들 때문에 정량분석에 이용할 수 없었다.

• Earthquakes and Structures
• /
• 제5권6호
• /
• pp.733-751
• /
• 2013

Near field ground motions have caused several structural damages in recent decades. As a result, seismic codes are being updated with related requirements. In this paper a comparative study on the seismic behavior of concentrically braced frames (CBFs) designed based on different seismic codes is performed. Reliability of various frames with different heights and bracing types are analyzed based on the results of "Incremental Dynamic Analysis" (IDA) under near field ground motions. Fragility curves corresponding to IO (Immediate Occupancy) and CP (Collapse Prevention) limit states are extracted based on IDA curves. Results imply that, frames designed based on the near field seismic design criteria of UBC-97 are more reliable under near field ground motions and their failure probability is less comparing to others.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.579-585
• /
• 2019

In this study, we investigate the effect of Al/N source ratios and growth rates on the growth and structural properties of AlN films on c-plane sapphires by plasma-assisted molecular beam epitaxy. Both growth rates and Al/N ratios affect crystal qualities of AlN films. The full width at half maximum (FWHM) values of ($10{\bar{1}}5$) X-ray rocking curves (XRCs) change from 0.22 to $0.31^{\circ}$ with changing of the Al/N ratios, but the curves of (0002) XRCs change from 0.04 to $0.45^{\circ}$ with changing of the Al/N ratios. This means that structural deformation due to dislocations is slightly affected by the Al/N ratio in the ($10{\bar{1}}5$) XRCs but affected strongly for the (0002) XRCs. From the viewpoint of growth rate, the AlN films with high growth rate (HGR) show better crystal quality than the low growth rate (LGR) films overall, as shown by the FWHM values of the (0002) and ($10{\bar{1}}5$) XRCs. Based on cross-sectional transmission electron microscope observation, the HGR sample with an Al/N ratio of 3.1 shows more edge dislocations than there are screw and mixed dislocations in the LGR sample with Al/N ratio of 3.5.

• 대한수학회보
• /
• 제51권5호
• /
• pp.1347-1356
• /
• 2014

In this paper, we analyze the security of the KMOV public key cryptosystem. KMOV is based on elliptic curves over the ring $\mathbb{Z}_n$ where n = pq is the product of two large unknown primes of equal bit-size. We consider KMOV with a public key (n, e) where the exponent e satisfies an equation ex-(p+1)(q+1)y = z, with unknown parameters x, y, z. Using Diophantine approximations and lattice reduction techniques, we show that KMOV is insecure when x, y, z are suitably small.

• 약학회지
• /
• 제23권3_4호
• /
• pp.129-132
• /
• 1979

The ORD and CD for hyoscine-N-butylbromide present curves of negative Cotton effect in 190-250nm region. The values of .alpha./sub 232/ .alpha./sub 208/, vertical bar .alpha./sub 232/ vertical bar + vertical bar .alpha./sub 208/ and .theta./sub 221.5/ have linearities in the range of lower concentration (hyoscine-N-butylbromide 0.01-0.1w/v%). It is possible to determine the optical purity of hyoseine-N-butylbromide by using these linearities. This experiment is extremely simple and less time-consuming than other methods for estimating optical purity.