• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.211-216
• /
• 2010

The luminescence properties of $In_{0.5}Ga_{0.5}As/In_{0.5}Al_{0.5}As$ multiple quantum wells (MQWs) grown on $In_{0.5}Al_{0.5}As$ buffer layers have been studied by using photoluminescence (PL) and time-resolved PL measurements. A$1-{\mu}m$ thick $In_{0.5}Al_{0.5}As$ buffer layers were deposited on a 500 nm thick GaAs layer, followed by the deposition of the InGaAs/InAlAs MQWs. In order to investigate the effects of InAlAs buffer layer on the optical properties of the MQWs, four different temperature sequences are used for the growth of InAlAs buffer layer. The growth temperature for InAlAs buffer layer was varied from 320^{\circ}C to $580^{\circ}C$. The MQWs consist of three $In_{0.5}Ga_{0.5}$As wells with different well thicknesses (2.5 nm, 4.0 nm, and 6.0 nm thick) and 10 nm thick $In_{0.5}Al_{0.5}$As barriers. The PL spectra from the MQWs with InAlAs layer grown at lower temperature range ($320-580^{\circ}C$) showed strong peaks from 4 nm QW and 6 nm QW. However, for the MQWs with InAlAs buffer grown at higher temperature range ($320-480^{\circ}C$), the PL spectra only showed a strong peak from 6 nm QW. The strongest PL intensity was obtained from the MQWs with InAlAs layer grown at the fixed temperature of $480^{\circ}C$, while the MQWs with buffer layer grown at higher temperature from $530^{\circ}C$ to $580^{\circ}C$ showed the weakest PL intensity. From the emission wavelength dependence of PL decay times, the fast and slow decay times may be related to the recombination of carriers in the 4 nm QW and 6 nm QW, respectively. These results indicated that the growth temperatures of InAlAs layer affect the structural and optical properties of the MQWs.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.919-926
• /
• 2021

In this study, we wanted to find out the optimal angle as a modified tangential projection of the patella. In the experiment, we used Kyoto Kagaku's PBU-50 phantom. In the supine position, the F-T angle was set to 95°, 105°, 115°, 125°, 135°, 145°, and Patella tangential projection images were obtained by varying the X-ray tube angle by 5° so that the angle between the X-ray centerline and tibia at each angle was 5~20°. Image J was used for image analysis and the congruence angle, lateral patellofemoral angle, patellofemoral index and contrast to noise ratio(CNR) were also measured. SPSS 22 was used for statistical analysis, and the mean values of congruence angle, patellofemoral angle, patellofemoral index, and CNR were compared with Merchant method through one-way batch analysis and corresponding sample t-test. As a result of the study, in the case of congruence angle, the angle of incidence of the knee-angle X-ray centerline was 105°-72.5° (20° tangential irradiation), 115°-72.5°, 77.5° (15, 20° tangential irradiation), 125°-82.5° (20° tangential irradiation), lateral patellofemoral angle is 115°-72.5°, 77.5° (15, 20° tangential irradiation), 125°-72.5° (10° tangential irradiation), patellofemoral index is 115°-72.5° (15° tangential irradiation) and 125°-72.5° (10° tangential irradiation) were not significantly different from Merchant method (p> .05). In case of CNR, it is not different from Merchant method at 105°-67.5°, 72.5° (15, 20° tangential irradiation), 115°-67.5°, 72.5°, 77.5° (10, 15, 20° tangential irradiation). (P> .05). Based on the results of this study, high diagnostic value images can be obtained by setting the knee angle and the angle of incidence of the X-ray tube to 115°-72.5° (15° tangential irradiation) during the modified tangential examination of the knee bone. It was confirmed.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.222-227
• /
• 1992

The effects of $V_2O_5$ addition as an additive on the densification, the microstructure and the magnetic properties of Mn-Zn ferrites were studied. The maximum density was observed at 0.1 wt% $V_2O_5$ content and it was recognized that a small content of $V_2O_5$ prohibited the discontinuous grain growth. The initial permeability showed maximum at 0.1 wt% $V_2O_5$ content and the power loss minimum at 0.03 wt% $V_2O_5$ content. It was found that a small content of $V_2O_5$ went into solid solution in the Mn-Zn ferrites, but above that extent $V_2O_5$ formed a second phase to be segregated at the grain boundaries.

• Archives of Pharmacal Research
• /
• v.21 no.2
• /
• pp.179-186
• /
• 1998

Dextran-5-aminosalicylic acid ester (dextran-5-ASA) was synthesized as a colon-specific prodrug of 5-aminosalicylic acid (5-ASA) which is active against inflammatory bowel diseases. Chemical stability of dextran-5-ASA in the bath of pH 1.2 or 6.8 was investigated at $37^{\circ}C$ for 6 hrs, and 5-ASA was not released on such conditions. Depolymerization (%) of dextran-5-ASA by dextranase with the degree of substitution (DS) of 18, 23, or 30 was 92, 62 or 45 in 8 hrs respectively, but was not affected by the MW of dextran (9,000, 40,600, 80,200 or 580,000). Distribution of 5-ASA in dextran, determined by gel filtration chromatography, appeared to be relatively uniform. Incubation of dextran-5-ASA (DS 18) in cecal contents of rats released 20% (28 g) and 35% (49 g) of 5-ASA in 8 hrs and 24 hrs, respectively, but no 5-ASA was liberated from small intestinal contents.

• Natural Product Sciences
• /
• v.18 no.2
• /
• pp.106-110
• /
• 2012

Diarylheptanoids, (5S)-1,7-bis-(3,4-dihydroxyphenyl)-5-hydroxyheptane-3-one-5-O-${\beta}$-D-xylopyranoside (1, Oregonin), 1,7-bis-(3,4-dihydroxyphenyl)-4-heptene-3-one (2, Hirsutenone), (5S)-7-(3,4-dihydroxyphenyl)-5-hydroxy-1-(4-hydroxyphenyl)-3-heptanone-5-O-${\beta}$-D-xylopyranoside (3, Alnuside A), (5S)-1-(3,4-dihydroxyphenyl)-5-hydroxy-7-(4-hydroxyphenyl)-3-heptanone-5-O-${\beta}$-D-xylopyranoside (4, Alnuside B), (5S)-1,7-bis-(3,4-dihydroxyphenyl)-5-hydroxyheptane-3-on-5-O-${\beta}$-D-glucopyranoside (5) and 1,7-bis-(4-hydroxyphenyl)-5-hydroxyheptane-3-on-5-O-${\beta}$-D-glucopyranoside (6, Platyphylloside) were isolated from the bark of Alnus pendula Matsumura. The structures of these compounds were identified based on the spectral and physicochemical data.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.147-150
• /
• 2015

Polynitrogen Compounds (PNC)는 질소만으로 이루어진 물질을 칭하며, 주로 질소간의 단일 결합과 이중결합으로 이루어져 있다. 질소 간 단일결합에너지 38.4kcal/mole에 비해 유난히 큰 229kcal/mole의 삼중결합 에너지 덕택에 PNC는 고에너지 물질로 큰 각광을 받고 있다. PNC는 합성과정이 큰 흡열반응으로 실험이 까다로워 이론적인 연구가 많이 진행되어왔다. 그 중에서 고리형태의 $N_5{^-}$가 안정할 것으로 예측되며, 실험적으로도 발견되었다. $N_5{^-}$를 안정화시키기 위해 많은 연구가 진행되었으며 그 중 하나가 금속과의 결합을 통한 화합물의 안정화이다. 본 연구에서는 $N_5{^-}$와 Cyclopentadienyl($C_5H_5{^-}$)이 전자구조나 기하학적 구조가 매우 유사함에 착안하여 이미 상대적으로 많은 합성이 보고되어 있는 $M(C_5H_5)_3$, $M(C_5H_5)_4$의 전이금속 M구조에 대하여 아직 발견되지 않은 $M(N_5)_3$, $M(N_5)_4$ 화합물의 구조와 열역학적 안정성을 알아보도록 한다. 본 연구에서 찾아진 $Zr(C_5H_5)_4$은 현재까지 실험적으로 보고된 $M(C_7H_7)(C_5H_5)$ 클러스터 구조에 비해 질소함유량이 약 67% 더 높다.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.94-97
• /
• 1987

In a converting reaction of $p-bromo-\alpha-diethylaminoacetophenone$ (1a) and $p-bromo-\alpha-piperidinoacetophenone$ (1b) with KCN and $(NH_4)_2CO_3$, to hydantoin, the expected 5-(p-bromophenyl)-5-diethylaminomethylhydantion (2a) and 5-(p-bromophenyl)-5-piperidinomethylhydantoin (2b) were not formed. Diethylaminomethyl group and piperidinomethyl group were eliminated and p,p'-dibromodiphenylhydantil (4), which might be formed through dimerization of 5-(bromophenyl)-hydantoin (3), and p-bromobenzoic acid (5), which was formed through a degradation of 5-(bromophenyl)-hydantoin, were obtained. In the case of $p-bromo-\alpha-morpholinoacetophenone$ (1c), the expected 5-(p-bromophenyl)-5-morpholinomethylhydantoin (2c) was formed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.60-70
• /
• 2001

The study of compatible liner with ADP-505 propellant based PCP was performed. HTPB/DDl was chosen as a binder of liner in order to prohibit migration of nitroester plasticizer from propellant. The possible formulations for liner were screened by peel test of EPDM insulation/liner, propellant/liner and insulation/liner/propellant. Also, the adhesion tests including tension and shear were conducted. The adhesion of liner and propellant fumed out to be very good. The peel value was shown 1.5∼1.8 daN/cm, tensile force was 5.5∼6.0bar and shear force was 4.2∼5.0bar. In the samples of insulation/liner/propellant, they also have shown good adhesion properties. The peel, tensile and shear strength were 1.8 daN/cm, 5.0∼6.0bar and 4.5∼5.0bar, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.523-527
• /
• 2000

Vanadate glasses in the Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ system containing 10mo1% glass former, P$_2$O$_{5}$ were prepared by melting the batch in pt. crucib1e followed by quenching on the copper plate. We found that Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ glass-ceramics obtained from nucleation of glass showed significantly higher capacity and longer cycle life than conventionally made crystalline LiCoO$_2$, LiNiO$_2$and LiV$_3$O$_{8}$. In the present paper, We describe electro-chemical properties during crystallization process and find the best crystallization condition of Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ g1ass as cathod material. Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ glass-ceramics shows superior rechargeable capacity of 220 mAh/g in the cycling between 2.0 and 3.9V.etween 2.0 and 3.9V.

• Korean Journal of Materials Research
• /
• v.30 no.5
• /
• pp.246-251
• /
• 2020

The annealing characteristics of cold-rolled Al-6.5Mg-1.5Zn-0.5Fe-0.5Mn alloy, newly designed as an automobile material, are investigated in detail, and compared with those of other aluminum alloys. Using multi-pass rolling at room temperature, the ingot aluminum alloy is cut to a thickness of 4 mm, width of 30 mm, and length of 100 mm to reduce the thickness to 1 mm (r = 75 %). Annealing after rolling is performed at various temperatures ranging from 200 to 500 ℃ for 1 hour. The specimens annealed at temperatures up to 300 ℃ show a deformation structure; however, from 350 ℃ they have a recrystallization structure consisting of almost equiaxed grains. The hardness distribution in the thickness direction of the annealed specimens is homogeneous at all annealing temperatures, and their average hardness decreases with increasing annealing temperature. The tensile strength of the as-rolled specimen shows a high value of 496 MPa; however, this value decreases with increasing annealing temperature and becomes 338 MPa after annealing at 400 ℃. These mechanical properties of the specimens are compared with those of other aluminum alloys, including commercial 5xxx system alloys.