• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.5
• /
• pp.222-238
• /
• 2008

In this paper, the random key pre-distribution scheme introduced in ACM CCS'02 by Eschenauer and Gligor is reexamined, and a generalized form of key establishment is introduced. As the communication overhead is one of the most critical constraints of any successful protocol design, we introduce an alternative scheme in which the connectivity is maintained at the same level as in the original work, while the communication overhead is reduced by about 40% of the original overhead, for various carefully chosen parameters. The main modification relies on the use of a two-level key pool design and two round assignment/key establishment phases. Further analysis demonstrates the efficiency of our modification.

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1189-1197
• /
• 1999

Low-density silica gel monolith was synthesized at ambient pressure by surface modification with TMCS and sub-sequent heat treatment. The mechanical thermal and optical properties of gel were studied. Compressive strength and modulus of compression of 350$^{\circ}C$-heated gel with the density of 0.24g/cm3 were 250kPa and 0.2MPa respectively. The thermal conductivity of silica gels synthesized at ambient pressure exhibited 0.02 W/m$.$K for the density of 0.24g/cm3 which is similar to that of the gel via supercritical drying and their main thermal transfer mechanism is considered to be solid and radiation conduction at room temperature. Ambient-dried silica gels were transparent blue showing about 60% of transmittance in the wavelength of 1500-2100nm and typical absorption bands of existing bonds under heat treatment at 350$^{\circ}C$. Medium scale monolity(${\Phi}$=50mm) at ambient pressure could be successfully prepared through total 5-month process period.

• Macromolecular Research
• /
• v.15 no.7
• /
• pp.671-675
• /
• 2007

Soybean proteins appear to harbor a great deal of potential as functional ingredients due to the fact that they are composed of highly bioavailable peptides and amino acids. To develop drink- or gel-type foods formulated with soybean protein, the physicochemical properties of intact and chemically modified soy glycinin were assessed. Maleylation to soy glycinin altered the surface charges of glycinin via the modification of lysine residues, and subsequently generated the dissociation of glycinin subunits owing to the increase in charge repulsion. This modification thus improved the solubility of glycinin, particularly under acidic pH conditions. It is worthy of note that maleylation increased the susceptibility of the basic subunits of mTGase and the formation of a substantial quantity of molecules at a low protein solution concentration. The results of dynamic rheological studies indicated that the 5% intact glycinin progressively formed the gel with mTGase treatment in a concentration-dependent manner, but maleylated-glycinin did not.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.5
• /
• pp.395-404
• /
• 2007

Feature-based modeling and history-based modeling are the two main paradigms that are used in most of current CAD systems. Although these modeling paradigms make it easier for designers to create solid model, it may pose dependency constraints on features that are interacting one with another. When editing such features, these constraints often cause unpredictable and unacceptable results. For example, when a parent feature is deleted, the child features of the parent feature are also deleted. This entails re-generations of the deleted features, which requires additional modeling time. In order to complement this situation, we propose a method to delete only the features of interest by disconnecting the dependency constraints. This method can provide designers with more efficient way of model modification.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.659-662
• /
• 2008

A new and useful poly(ethylene oxide)-based pH-sensitive block copolymer is introduced. Poly(ethylene oxide-b-N-phenylmaleimide) was first synthesized by anionic polymerization of N-phenylmaleimide (N-PMI) using mixed alkali metal polymeric alkoxide by sequential monomer addition method in the mixture of benzene/THF/DMSO (10/5/3, v/v/v) at room temperature. Reductive deimidation of the resulting block copolymer was performed using hydrazine monohydrate leading to the formation of the corresponding pH-sensitive poly(ethylene oxide-b-maleic acid).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.939-951
• /
• 1994

In adaptive equalizers based on least mean squares (LMS) algorithms, the convergence rate is determined by the convariance matrix of an input signal. When the eigenvalue spread of the convariance matrix is close to unity, the convergence rate is quite fast. In this paper, for fast convergence of LMS-based adaptive equalizers we propose a modified reference signal pertinent to the statistical channel. From the theoretical analysis and computer simulation, it is shown that the proposed modification method is quite effective for fast convergence of LMS-based adaptive equalizers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.82-89
• /
• 1996

In this study, to choose the drilling m/c with analysis model for dynamic design of machine tool strctures, are used substucture syntheis method for reduction to degrees of freedom of dynamic model and analysis evaluation of substructures The dynamic factors of substurctures are examined by substructure synthesis method. And that dynamic design of structures for energy balancing are performed. The computer program for calculated of the dynamic and energy distribution analysis was developed. Result of numerical analysis by developed program obtained to conclusion as following. The design of machine tool structures by dynamic avoid the resonances, and are known to considered based on the energy balancing. These methods can be used effectively for the performance evaluation, design modification and improvement of dynamic performance evaluation, design modification and improvement of dynamic performance of machine tools.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.2
• /
• pp.13-24
• /
• 2000

최근 국내에서 많이 건설되어지고 있는 주상복합 건축물은 하부의 골조형식과 상부의 벽식 구조가 결합된 구조형식을 가지고 있다 따라서 지진 발생시 동일한 형식을 가진 건축물과는 상이하고 복잡한 반응을 보이게 된다 이러한 건축물의 등가정적 해석시 국내 규준에서는 기타구조물로 분류하여 3.5 의 반응수정계수를 적용하고 있다 그러나 이 계수는 검증되어지지 않는 상태로 사용되어지고 있으므로 상당한 위험성을 내포하고 있다 본 연구에서는 단순화한 주상복합 건물의 해석 및 실제의 건물에 대한 3차원 비선형 해석을 통하여 반응수정계수를 유도하였다 유도된 반응수정계수는 ATC 기준과 우리나라 기준의 차이를 고려한 보정을 수행하였다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.538-544
• /
• 1999

One of the most important requirements for the development of computerized relay setting system is its openness to abbommodate the various changes like new panel additions. This paper describes the relay settein-coordination system(PROSET2000), which has an open system architecture and adopts the dbject oriented programming paradigm. Its main features include the intelligent fault type identification, automatic running of the short circuit analysis, ren-time rulebase modification, automatic documentation, ect.

• International Journal of Automotive Technology
• /
• v.8 no.5
• /
• pp.605-614
• /
• 2007

This paper presents the research results for the reduction of a gear whine noise based on experimental and analytic methods. The test vehicle has a whine noise problem at the passenger seats in a sport utility vehicle. To identify the transfer path of the interior noise due to the axle system, a vibration path analysis, modal analysis and operational deflection shape analysis are systematically employed. By using these various methods, it has been found that the interior noise generated by the axle system was airborne noise. To reduce and predict the whine generated by the axle system, structural modifications for the axle system are performed by using FEM and BEM techniques. The structural modification of the axle cover is suggested for the reduction of whine noise.