• Archives of Pharmacal Research
• /
• v.28 no.5
• /
• pp.626-635
• /
• 2005

Liposome as a carrier of topotecan (TPT), a promising anticancer drug, has been reported in attempt to improve the stability and antitumor activity of TPT. However, the biodistr ibution pattern of TPT liposome in vivo and PEG-modified liposome containing TPT have not been studied systemically. In this paper, the in vitro stability and in vivo biodistribution behavior of several liposomes containing TPT with different lipid compositions and PEG-modification were studied. Compared with the 'fluid' liposome (S-Lip) composed of soybean phosphatidylcholine (SPC), the 'solid' liposome (H-Lip) composed of hydrogenated soybean phosphatidylcholine HSPC decreased the leaking efficiency of TPT from liposome and enhanced the stability of liposome in fetal bovine serum (FBS) or human blood plasma (HBP). The results of biodistribution studies in S$_{180}$ tumor-bearing mice showed that liposomal encapsulation increased the concentrations of total TPT and the ratio of lactone form in plasma. Compared with free TPT, S-Lip and H-Lip resulted in 5- and 19- fold increase in the area under the curve (AUC$_{0\rightarrow\propto}$), respectively. PEG- modified H-Lip (H-PEG) showed 3.7-fold increase in AUC$_{0\rightarrow\propto}$ compared with H-Lip, but there was no significant increase in t$_{1/2}$ and AUC$_{0\rightarrow\propto}$ for PEG-modified S-Lip (S-PEG) compared with S-Lip. Moreover, the liposomal encapsulation changed the biodistribution behavior, and H-Lip and H-PEG dramatically increased the accumulation of TPT in tumor, and the relative tumor uptake ratios were 3.4 and 4.3 compared with free drug, respectively. There was also a marked increase in the distribution of TPT in lung when the drug was encapsulated into H-Lip and H-PEG. Moreover, H-PEG decreased the accumulation of TPT in bore marrow compared with unmodified H-Lip. All these results indicated that the membrane fluidity of liposome has an important effect on in vitro stability and in vivo biodistribution pattern of liposomes containing TPT, and PEG-modified 'solid' liposome may be an efficient carrier of TPT.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.413-420
• /
• 2012

In this study, the Kernel integration scheme for 2D linear elastic direct boundary element method has been discussed on the basis of subparametric element. Usually, the isoparametric based boundary element uses same polynomial order in the both basis function and mapping function. On the other hand, the order of mapping function is lower than the order of basis function to define displacement field when the subparametric concept is used. While the logarithmic numerical integration is generally used to calculate Kernel integration as well as Cauchy principal value approach, new formulation has been derived to improve the accuracy of numerical solution by algebraic modification. The subparametric based direct boundary element has been applied to 2D elliptical partial differential equation, especially for plane stress/strain problems, to demonstrate whether the proposed algebraic expression for integration of singular Kernel function is robust and accurate. The problems including cantilever beam and square plate with a cutout have been tested since those are typical examples of simple connected and multi connected region cases. It is noted that the number of DOFs has been drastically reduced to keep same degree of accuracy in comparison with the conventional isoparametric based BEM. It is expected that the subparametric based BEM associated with singular Kernel function integration scheme may be extended to not only subparametric high order boundary element but also subparametric high order dual boundary element.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.214-223
• /
• 2004

Oxygen and hydrogen isotopic compositions of the Jurassic peraluminous Hwacheon granite were measured, and compared with those of other Jurassic peraluminous Daebo granite in Korea. $\delta$$\^$18/O values for quartz and feldspar of the Hwacheon granite range from 8.2 to 10.6 and 5.8 to 9.0$\textperthousand$, respectively. Whole rock $\delta$$\^$18/O values for banded biotite gneiss country rocks surrounding the Hwacheon granites range from 8.1 to 9.4$\textperthousand$. Whole rock and biotite $\delta$D Values for Hwacheon granite range from -84 to -113 and -107 to -113$\textperthousand$, respectively. Whole rock $\delta$D values for banded biotite gneiss country rocks range from -76 to -100$\textperthousand$. Both $\delta$$\^$18/O and $\delta$D values of the Hwacheon granite are characterized by low values compared to the 'normal' values for the fresh peraluminous granitic rocks. Low $\delta$$\^$18/O values of the Hwacheon granite resulted from fluid-rock interaction for a long period. Isotopic modelling result renders that a relatively low-$\delta$$\^$18/O fluid below -1$\textperthousand$ was involved in subsolidus isotopic exchange under a relatively high fluid/rock ratio (<-6). The fluid of meteoric origin has experienced a modification of oxygen isotopic composition as a result of fluid-rock interaction with the Hwacheon granite and surrounding metapelitic country rocks.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.70-76
• /
• 2008

The PES-g-BTCA membrane was synthesized by UV irradiation method and then used to be modified into the PES anion exchange membrane by the amination reaction. Their chemical structures and adsorption properties were investigated. The degree of grafting and amination were increased with increasing the reaction time and had the maximum values of 138% and 1.20 mmol/g at 80 min, respectively. The initial thermal degradation temperature of PES membrane was $400^{\circ}C$. Which was reduced as the surface modification reaction had proceeded. The values of contact angle for PES membrane were decreased from 68.1 to $40.2^{\circ}$ with increasing the extent of amination, the water up-take and ion exchange capacity were also increased with increasing UV irradiation time until 80 min. The average pore size and BET surface area were decreased in order of PES, PES-g-BTCA, and aminated PES ion exchange membrane. Their average pore sizes were 624.8, 359.7, and 138.5 ${\AA}$, and their surface areas were 10.1,9.7 and 1.7 $m^2/g$, respectively.

• Korean Journal of Acupuncture
• /
• v.22 no.4
• /
• pp.57-65
• /
• 2005

Objectives : Circium japonicum is a pharmacologically active used in traditional Korean medicine. An aqua-acupuncture solution of the Circium japonicum was assessed to determine the mechanism of its antioxidant activity. Materials : Circium japonicum was obtained from a Dongguk Korean Medicine Hospital (Kyung-ju, Kyungbuk). The freeze-dry powder was collected (yield 5.1%) for the aqua-acupuncture solution. Scavenging activity on DPPH free radicals by the Circium japonicum aqua-acupuncture solution (CJAS) was assessed according to the method followed by Gyamfi et al.. and then scavenging activity orl superoxide radicals $(O_2^-{\cdot})$ was assessed by the method described by Gotoh et al. with slight modification. Deoxyribose assay to determine the rate constant for the reactions between either antioxidants and hydroxyl radicals or antioxidants and iron ions. We tested by; (1) Non-site-specific scavenging assay (hydroxyl radicals, OH), (2) Site-specific scavenging assay (chelate iron ions), and (3) Pro-oxidant effect of the CJAS on iron dependent hydroxyl radical generation. Finally, we determined hydroxyl radical-mediated DNA nicking formation. Conclusion : Our study demonstrated that CJAS has antioxidant activities and we investigated the potential effectiveness of CJAS in preventing oxidative stress-mediated disease further.

• Membrane Journal
• /
• v.30 no.1
• /
• pp.38-45
• /
• 2020

Although Lithium metal battery (LMB) has a very large theoretical capacity, it has a critical problem such as formation of dendrite which causes short circuit and short cycle life of the LMB. In this study, PDMS/GO composite with evenly dispersed graphene oxide (GO) nanosheets in poly (dimethylsiloxane) (PDMS) was synthesized and coated into a thin film, resulting in the effect that can physically suppress the formation of dendrite. However, PDMS has low ion conductivity, so that we attained improved ion conductivity of PDMS/GO thin film by etching technic using 5wt% hydrofluoric acid (HF), to facilitate the movement of lithium (Li) ions by forming the channel of Li ions. The morphology of the PDMS/GO thin film was observed to confirm using SEM. When the PDMS/GO thin film was utilized to lithium metal battery system, the columbic efficiency was maintained at 87.4% on average until the 100^th cycles. In addition, voltage profiles indicated reduced overpotential in comparison to the electrode without thin film.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.667-672
• /
• 2011

This paper presents to study the sensor fusion of positioning sensors using UKF(unscented Kalman filter) for positioning accuracy improvement of AGV(automatic guided vehicle). The major guidance systems for AGV are wired guidance and magnetic guidance system. Because they have high accuracy and fast response time, they are used in most of the FMS(flexible manufacturing system). However, they had weaknesses that are high maintenance cost and difficult of existing path modification. they are being changed to the laser navigation in recent years because of those problems. The laser navigation is global positioning sensor using reflecters on the wall, and it have high accuracy and easy to modify the path. However, its response time is slow and it is influenced easily by disturbance. In this paper, we propose the sensor fusion method of the laser navigation and local sensors using UKF. The proposed method is improvement method of accuracy through error analysis of sensors. For experiments, we used the axle-driven forklift AGV and compared the positioning results of the proposed method with positioning results of the laser navigation. In experimental result, we verified that the proposed method can improve positioning accuracy about 16%.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.4
• /
• pp.329-337
• /
• 2011

The Acer wilsonii complex including A. wilsonii, A. tutcheri, and A. confertifoilum is distributed in southern China. Morphological variation was examined to delimit the species and to determine whether recognition at the specific level was warranted. Univariate and bivariate statistical methods, based on data taken from herbarium specimens, were used to examine morphological variation between and within species. This study showed that A. tutcheri differed from A. wilsonii by its rather short inflorescence, small leaf blades, and three leaf lobes with distinctive serrate leaf lobes. In contrast, there was virtually no separation of taxa with respect to the paniculate-corymbose or short paniculate inflorescence between A. confertifolium and A. tutcheri, suggesting that A. confertifolium morphologically resembled A. tutcheri and is a rather smaller form of it. Circumscription of Acer wilsonii has been quite troublesome, because the important holotype and isotype specimens contained different species under the same number and were misleading with respect to the correct application of the name. Furthermore, lobation is very weak within ser. Sinensia, but diversified inflorescences usually occur in China. A three lobed leaves species, A. wilsonii, represents the reduction in lobation without any modification of panicle inflorescences and seems to be closely related to A. sinense. However, A. tutcheri, which shows a reduction in panicle inflorescence with four petals and sepals, may not be closely related to A. sinense. Three lobed taxa may not correctly reflect the true relationship within ser. Sinensia. The designated lectotype of A. wilsonii, line drawings of representative leaves of related species, a key, and distribution maps of these taxa are presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.499-505
• /
• 2012

As the excavation depths during excavation works in urban sites are getting deeper and bigger, It is necessary to study for the improvements to solve the problems in the excavation processes. This research deals with the excavation method that can not only minimize the effect on the surrounding constructions, but also shorten the construction period of the excavation work. For this research, there have been an extensive literature review of the bibliographic data about Slurry Wall Method, which is recognized around the world, and the analysis of the major problems in the existing ineffective construction step. These efforts led to the technical improvements. Accordingly, a new construction method applied with the new technical factors has been suggested, and it was possible to compare Slurry Wall Method with the construction method and analyze them on the base of the examples using the suggested method. This new method decreased the excavation period by 15 days. It took only 33days to finish the excavation work, as compared to 48 days that can be seen on the pre-modification schedule. Furthermore, the suggested method in this research is safer, more economically feasible, and better for the environment than Slurry Wall Method. It will contribute to shortening the construction period of Slurry Wall Method in the end.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.551-565
• /
• 2004

Purpose: The purpose of this study is to develop a day care center model focused on public health institutions for the elderly residing in their homes. Method: Research design for this study was a mult-level research, which consisted of a related literature review, an Internet search for knowledge of the current situation at home and abroad, on-site interviews, questionnaires collected from a sample of residents in a rural area, and a key-informants approach. Results: 1) The subjects of service - Generalized service should be provided to the elderly, 65 years and older, regardless of their assets. 2) The contents of service - Providing pre-health oriented and post-social welfare service that can integrate and satisfy a wide variety of public health and welfare needs of the elderly would strengthen the health care service of a day care center for the elderly. 3) Delivery system - Basic-level local self-governments should become a central operating body, and establishing a properly adjusted delivery system to a rural area after considering the efficiency and the access of vulnerable rural areas is needed based on modification of 'a Special Law for Agricultural and Fishery Areas' (rural public health center>rural health sub-center ${\rightarrow}$ unified health sub-center ${\rightarrow}$ public health hospital (public health center) ${\rightarrow}$ public welfare office). 4) Facility - Public health facilities such as public health centers and sub-centers should be located in areas that can easily access the facilities. 5) Funding - For day care center for the elderly in local self-government, the central government should modify a relevant implementation of subsidy in and provide some facilities and service regardless of the degree of self reliance of local self-government. 6) Human resources - It is needed to guarantee the period of workers of a day care center for the elderly, at least 3 to 5 years, with considering their specialty on aged care and avoiding circulation based positions. Furthermore, appropriate specially trained personnel such as medical workers and social workers should be placed to take care of both health service and welfare through strengthening of 'rules of law of elderly welfare,' Conclusion: future research is needed to test the model through a demonstration study using a model which may be developed in the future and to standardize the appraisal criteria of people hoping to enter a day care center for the elderly.