• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.211-218
• /
• 2018

The purpose of the present study was to test the impact of depression on mobile phone dependency among elementary school students, to test the mediating effect of self-esteem between depression and mobile phone dependency, and to draw out theoretical and practical implications in terms of preventing or reducing mobile phone dependency. Based on previous studies, a longitudinal research model between the aforementioned three variables has been identified. The present study analyzed the 4th, 5th, and 6th wave data from Korea Children and Youth Panel Study 2010 (KCYPS 2010). The major results were as follows. First, depression could have a significant negative effect on self-esteem. Second, self-esteem could have a significant negative effect on mobile phone dependency. Third, the influence of depression on mobile phone dependency was not significant. Fourth, gender could be a significant moderating variable between depression and self-esteem. Finally, a number of implications of these findings were also discussed.

• 한국시뮬레이션학회논문지
• /
• 제10권4호
• /
• pp.1-10
• /
• 2001

For the simulation of piping vibrations in petrochemical plants, forcing functions mainly depend upon the equipment working mechanism and vibration resources in the piping systems. In general, harmonic function is used to simulate rotary equipment. Mechanical driving frequencies, wave functions, and response spectrum are used to simulate reciprocating compressors, surge vibration of long transfer piping, and seismic/wind vibration, respectively. In this study, the general suggestions for forcing functions were reviewed and proposed the forcing function to simulate the spray injection system inside the pipe in which two different fluids are distributed uniformly. To confirm the results, the scheme was applied for a real piping system. The vibration mode of the real system was consistent with the 4th mode (26.725 Hz) obtained by simulation using the forcing function presented in this study.

• 대한조선학회지
• /
• 제21권4호
• /
• pp.40-48
• /
• 1984

The computer program DASH(Direct Analysis of Ship's Hull), based on the direct calculating procedure as proposed at the 4th ISSC(1970), was developed. The DASH program is designed by the following calculation procedure: 1) Derivation of the design wave loads through the ship motion analysis based on the strip theory. 2) Stress analysis of the hull girder based on the 7-degree of the freedom beam theory including the warping torsion effect. 3) Long-term prediction of the stresses based on the statistical approach using sea-spectrums and ocean wave data in the ship's route. An example calculation was performed for the purpose of a demonstration of the present approach on the 16,200 DWT Oil Tanker. The results are discussed and compared with the conventional method.

• 지구물리와물리탐사
• /
• 제12권1호
• /
• pp.99-104
• /
• 2009

본 연구에서는 천부 토양층의 2차원 불균질 S파 단면을 결정하기 위해 천부 굴절법 탐사로부터 얻은 SH파 자료에 대한 파형역산 기법을 제안한다. 2차원 매질에서 SH파의 전파를 모사하기 위해 2.5차원 파동 방정식을 사용한다. 합성탄성파를 계산하기 위해 공간축으로 4차, 시간축으로 2차 근사한 staggered grid 유한차분법을 사용하여 파동 방정식을 푼다. 계산된 파형과 측정 파형의 잔여오차로 정의되는 목적함수를 하이브리드 발견적 탐색기법에 의해 최소화한다. 2차원 지하구조 모형은 각기 다른 심도 경계면을 갖는 블록과 블록 내부의 S파 속도에 의해 매개화한다. 수치실험은 암영층파 불규칙한 경계를 갖는 모델에 대해 백색잡음을 추가한 합성 SH파 자료를 이용하여 수행하였다. 지표 굴절법 자료로부터 암영층을 포함한 구조를 적절한 계산시간 내에 영상화할 수 있었다

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.427-433
• /
• 2011

Chassis part in automotive body is affected by fatigue load at driving on the ground. Universal joint on this part is influenced extremely by the fatigue load. Fatigue life, damage and natural frequency are analyzed at universal joint under nonuniform fatigue load. The york part at universal joint is shown with the maximum equivalent stress and displacement of 60.755 MPa and 0.21086 mm as strength analysis. The possible life in use in case of 'SAE bracket' is the shortest among the fatigue loading lives of 'SAE bracket', 'SAE transmission' and 'Sine Wave'. The damage at loading life of 'SAE transmission' is the least among 3 types. The frequency of damage in case of 'Sine Wave' is 0.7 with the least among 3 fatigue loading life types but this case brings the most possible damage as 80% at the average stress of 0. Natural vibration at this model is analyzed with the orders of 1'st to 5'th and maximum frequency is shown as 701.73 Hz at 5'th order. As the result of this study is applied by the universal joint on chassis part, the prevention on fatigue damage in automotive body and its durability are predicted.

• 지역사회간호학회지
• /
• 제30권4호
• /
• pp.528-538
• /
• 2019

Purpose: The purpose of this study was to follow-up the frailty of the old who received home health care by Registered Nurse in Public Health Center over 8 years. Methods: We used the second wave data which was a comprehensive longitudinal data set, Public Health Information System of a public health center located in Seoul from 2010 to 2018. For statistical analysis, a mixed model of repeated measures by R program was used. Results: Frailty (range: 0~31) was getting worse significantly from 5.38 on registration to 6.54 on 4th year, 7.40 on 7th year, 7.69 on 8th year with adjustment for age, sex, economic status, the number of family, and the number diseases. The coefficient of parameters with frailty change was serviced year (β=0.29, p<.001), age (70~79 to 60~69; β=0.98, p=.018) and sex (female to male; β=2.55, p<.001). Conclusion: This study showed that the home visiting health service needs to take attention to aged 70s and over, female. The home health care of public health center need to be extended more practical and effective services in terms of 'community care'and 'ageing in place'.

• 대한전자공학회논문지TC
• /
• 제40권5호
• /
• pp.197-203
• /
• 2003

본 논문에서는 cascode 하모닉 발생기를 이용하여 고변환이득 특성의 밀리미터파 subharmonic 믹서를 설계 및 제작하였다. 밀리미터파 subharmonic 믹서는 0.1 ㎛ GaAs PHEMT와 CPW 라이브러리를 이용하여 설계되었다. 설계된 cascode 하모닉 발생기의 출력 특성 측정결과, 14.5 GHz의 신호를 10 dBm 전력으로 인가하였을때, 1차, 2차 및 4차 하모닉 성분은 각각 -21.62 dBm, -32.65 dBm 및 -13.45 dBm의 결과를 얻어 가장 큰 4차 하모닉 성분을 얻었으며, 제작된 밀리미터파 subharmonic 믹서의 측정결과 14.5 GHz LO 신호를 13 dBm의 크기로 입력하였을 때 3.4 dB의 높은 변환이득 특성을 얻었다. 또한 -53.6 dB의 LO-to-IF, -46.2 dB의 우수한 LO-to-RF 격리 특성을 나타내었다. 제작된 밀리미터파 subharmonic 믹서는 기존에 발표된 밀리미터파 대역의 subharmonic 믹서에 비해 가장 높은 변환이득 특성을 나타내었다.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.34-40
• /
• 2010

Bragg reflection of nonlinear waves is simulated by a 2D fully nonlinear numerical wave tank (NWT). The developed NWT was based on the Boundary Element Method (BEM) with potential theory and the mixed Eulerian-Lagrangian (MEL) time marching scheme with Runge-Kutta 4th-order time integration. A spatial variation of wave elevations and their Fourier amplitudes of each component are compared to investigate the effect of sea bottom ripples and their relative heights. The incident waves over an undulated sea bottom are partially reflected and changed to partial standing waves due to Bragg reflection. The present results are verified with linear calculations and experimental data. It is found that the 1st-order wave component is mainly affected by Bragg reflection and its spatial modulation is significant in front of the bottom ripples.

• 한국해안해양공학회지
• /
• 제19권4호
• /
• pp.375-384
• /
• 2007

[ $Pad{\acute{e}}$ ] 근사에 의한 포물형 근사모형들을 제시하였고 $Pad{\acute{e}}$(15, 15) 근사모형은 일정 경사의 지형에 대한 엄밀해와 비교할 때 입사각 $80^{\circ}$까지 적용 가능함을 보였다. 포물형 근사식에 대한 체계적인 유도방법을 보인 후, 본 연구에서는 15차 $Pad{\acute{e}}$ 근사모형까지 나타내었고 일정 경사지형에서의 파랑변형에 대한 수치결과들을 제시하였다.

• Asian Journal of Innovation and Policy
• /
• 제8권1호
• /
• pp.58-72
• /
• 2019

The wave of the 4th Industrial Revolution was announced by Schwab Klaus at the 2016 World Economic Forum in Davos, and prospects and measures with the future society in mind have been put in place. With the launch of the Moon Jae-in administration in May 2017, Korea has shifted all of its interest to Big Data, which is one of the most important features of the 4th Industrial Revolution. In this regard, this study focuses on the role of the public sector, explores related issues, and identifies an agenda for determining the demand for ways to foster Big Data ecosystem, from an objective perspective. Furthermore, this study seeks to establish priorities for key Big Data issues from various areas based on importance and urgency using a Delphi analysis. It also specifies the agenda by which Korea should exert national and social efforts based on these priorities in order to demonstrate the role of the public sector in reinforcing the Big Data ecosystem.