• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1131-1138
• /
• 2004

The objective of this study was to investigate the effects of different sources of Ca and P on urine and ileal digesta pH, and ammonia ($NH_{3}$), methane ($CH_{4}$), and odor emission. In experiment 1, eight pigs (commercial three-way cross; initial BW 67$\pm$3 kg) were arranged in a repeated 4$\times$4 Latin Square design. All pigs were equipped with a T-cannula in the distal ileum. Four corn-soybean meal based diets were formulated. Diet 1 was the control in which dicalcium phosphate (DCP) and limestone ($CaCO_{3}$) were used as the sources of inorganic P and Ca. In Diets 2 and 3, ${H_{3}}{PO_{4}}$, monocalcium phosphate (MCP), and $CaSO_{4}$replaced DCP and $CaCO_{3}$ as the inorganic sources of P and Ca. Diet 4 was similar to Diet 1 except that it was fortified with HCl to provide an acid load similar to that of diet 2. Urine and ileal digesta pH were determined in pigs fed each of these diets. In Exp. 1, urine pH decreased (p<0.05) in animals consuming diets containing ${H_{3}}{PO_{4}}$-$CaSO_{4}$ (5.85$\pm$0.38) and MCP-$CaSO_{4}$(5.73$\pm$0.30) compared with the DCP-$CaCO_{3}$ diet (6.89$\pm$0.24). In the pigs consuming ${H_{3}}{PO_{4}}$-$CaSO_{4}$, ileal digesta pH decreased compared with the control (5.52$\pm$0.28 vs. 6.66$\pm$0.17; p<0.05). Based on the results of Exp. 1, a total of four trials were performed in environmental chambers for determining how $NH_{3}$, $NH_{4}$, and odor were affected by the different dietary Ca and P sources (Exp. 2). In Exp. 2, pigs fed the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet had decreased (30%) $NH_{3}$ emissions compared with the control (p<0.05). Also, a combination of MCP-$CaCO_{3}$-$CaCl_{12}$ decreased $NH_{3}$ emission by 15% (p<0.05). Emission of $CH_{4}$ was decreased only with the ${H_{3}}{PO_{4}}$-$CaSO_{4}$ diet with 14% (p<0.05). Odorant emission of phenolics and volatile fatty acids increased roughly three-fold with the DCP-$CaSO_{4}$ diet but was not affected by other test diets. In conclusion, acidogenic Ca and P sources in swine diets can decrease the urinary pH and reduce $NH_{3}$ and $CH_{4}$ emission from swine facilities.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.139-147
• /
• 2008

New PPV derivatives which contain electron-withdrawing CF3F4phenyl group, poly[2-(2-ethylhexyloxy)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (CF3F4P-PPV), and poly[2-(4-(2-etylhexyloxy)-phenyl)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (P-CF3F4P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing CF3F4phenyl group to the phenyl backbone, the LUMO and HOMO energy levels of CF3F4P-PPV (3.14, 5.50 eV) and P-CF3F4P-PPV (3.07, 5.60 eV) were reduced. The PL emission spectra in solid thin film are more red-shifted over 50 nm and increased fwhm (full width at half maximum) than solution conditions by raising aggregation among polymer backbone due to electron withdrawing effect of 2,3,5,6-tetrafluoro-4-trifluoromethylphenyl group. The EL emission maxima of CF3F4P-PPV and P-CF3F4P-PPV appear at around 530-543 nm. The current density-voltage-luminescence (J-V-L) characteristics of ITO/PEDOT/polymer/Al devices of CF3F4P-PPV and P-CF3F4P-PPV show that turn-on voltages are around 12.5 and 7.0 V, and the maximum brightness are about 82 and 598 cd/m2, respectively. The maximum EL efficiency of P-CF3F4P-PPV (0.51 cd/A) was higher than that of CF3F4P-PPV (0.025 cd/A).

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.278-283
• /
• 2014

Cecropins (Cec) are antibacterial peptides and their expression is induced in a pig intestinal parasite Ascaris suum by bacterial infection. To explore the usefulness of its activity as an antibiotic, CecP4 cDNA was prepared and cloned into the pPICZ B expression vector and followed by the integration into AOX1 locus in Pichia pastoris. The supernatants from cell culture were collected after methanol induction and concentrated for the test of antimicrobial activity. The recombinant P. patoris having CecP4 showed antimicrobial activity when tested against Staphyllococcus aureus in disc diffusion assay. We selected one of the CecP4 clones (CecP4-2) and performed further studies with it. The growth of recombinant P. pastoris was optimized using various concentration of methanol, and it was found that 2% methanol in the culture induced more antibacterial activity, compared to 1% methanol. We extended the test of antimicrobial activity by applying the concentrated supernatant of CecP4 culture to Pseudomonas aeruginosa and E. coli respectively. Recombinant CecP4 also showed antimicrobial activity against both Pseudomona and E. coli, suggesting the broad spectrum of its antimicrobial activity. After improvements for the scale-up, it will be feasible to use recombinant CecP4 for supplementation to the feed to control microbial infections in young animals, such as piglets.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.68-76
• /
• 2002

In this study, we have investigated the geochemical behavior and fate of heavy metals in acid rock drainage (ARD). The ARD was collected from the area of the former Dongrae pyrophyllite mine. The Dongrae Creek waters were strongly acidic (pH : 2.3~4.2) and contained high concentrations of $SO_4$, Al, Fe, Mn, Pb, Cu, Zn, and Cd, due to the influence of ARD generated from weathering of pyrite-rich pyrophyllite ores. However, the water quality gradually improved as the water flows downstream. In view of the change of mole fractions of dissolved Fe, Al and Mn, the generated ARD was initially both Fe- and AA-ich but progressively evolved to more Al-rich toward the confluence with the uncontaminated Suyoung River. As the AR3 (pH 2.3) mixed with the uncontaminated waters (pH 6.5), the pH increased up to 4.2, which caused precipitation of $SO_4$-rich Fe hydroxysulfate as a red-colored, massive ferricrete precipitate throughout the Dongrae Creek. Accompanying the precipitation of ferricrete, the Dongrae Creek water progressively changed to more Al-rich toward downstream sites. At the mouth of the Dongrae Creek, it (pH 3.4) mixed with the Suyoung River (pH 6.9), where pH increased to 5.7, causing precipitation of Al hydroxysulfate (white precipitates). Neutralization of the ARD-contaminated waters in the laboratory caused the successive formation of Fe precipitates at pH<3.5 and Al precipitates at higher pH (4~6). Manganese compounds were precipitated at pH>6. The removal of trace metals was dependent on the precipitation of these compounds, which acted as sorbents. The pHs for 50% sorption ($pH_{50}$) in Fe-rich and Al-rich waters were respectively 3.2 and 4.5 for Pb, 4.5 and 5.8 for Cu, 5.2 and 7.4 for Cd, and 5.8 and 7.0 for Zn. This indicates that the trace metals were sorbed preferentially with increasing pH in the general order of Pb, Cu, Cd, and Zn and that the sorption of trace metals in Al-rich water occurred at higher pH than those in Fe-rich water. The results of this study demonstrated that the partitioning of trace metals in ARD is not only a function of pH, but also depends on the chemical composition of the water.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.4
• /
• pp.349-355
• /
• 2007

Periodate-oxidized soluble starch was reacted with papain at pH 4.0, pH 7.0, and pH 9.7, and an oxidized soluble starch-papain conjugate was produced. When compared with native papain, the specific activity decreased to 60%, in both the modified papain reacted with 0.4% $NaBH_4$ and in the modified papain not reacted with $NaBH_4$. The specific activity decreased to 70% in the modified papains reacted with 1.5% $NaBH_4$ and 4.0% $NaBH_4$, respectively. The reduction by $NaBH_4$ did not have an effect in the thermal stability of either the modified or nonmodified papain. An activity of 54.7% remained in the papain modified at pH 4.0, which was incubated at $80^{\circ}C$ for 40 min. The papains modified at pH 7.0 and pH 9.7 and incubated for 40 min at two different temperatures, respectively, were stable to $60^{\circ}C$, and at $80^{\circ}C$ their activities at 56.3% and 44.1 %, respectively. The modified papain's thermal stability pattern was similar to that of native papain, with no increase in its statbility. In the range of pH $2.0{\sim}13.0$, the stability of the papain modified at pH 4.0 decreased greatly between pH $3.0{\sim}5.0$, but it was similar to the native papain at other pH values. The stability of the papain modified at pH 7.0 showed a similar pattern to the native papain at pH $2.0{\sim}6.0$, while its stability increased when moving into the alkali pH range. The papain modified at pH 9.7 also had increased stability, when moving into the alkali range. The results of Hammerstein milk casein, which was reacted with the papains modified at pH 4.0, pH 7.0, and pH 9.7, respectively, and analyzed by FPLC, showed different peaks according to the different modification pHs, and the greatest peak differences were observed with the modification at pH 9.7.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.890-897
• /
• 1998

The direct wafer bonding between n-InP(001) wafer and the ${Si}_3N_4$(200 nm) film grown on the InP wafer by PECVD method was investigated. The surface states of InP wafer and ${Si}_3N_4$/InP which strongly depend upon the direct wafer bonding strength between them when they are brought into contact, were characterized by the contact angle measurement technique and atomic force microscopy. When InP wafer was etched by $50{\%}$ HF, contact angle was $5^{\circ}$ and RMS roughness was $1.54{\AA}$. When ${Si}_3N_4$ was etched by ammonia solution, RMS roughness was $3.11{\AA}$. The considerable amount of initial bonding strength between InP wafer and ${Si}_3N_4$/InP was observed when the two wafer was contacted after the etching process by $50{\%}$ HF and ammonia solution respectively. The bonded specimen was heat treated in $H^2$ or $N^2$, ambient at the temperature of $580^{\circ}C$-$680^{\circ}C$ for lhr. The bonding state was confirmed by SAT(Scannig Acoustic Tomography). The bonding strength was measured by shear force measurement of ${Si}_3N_4$/InP to InP wafer increased up to the same level of PECVD interface. The direct wafer bonding interface and ${Si}_3N_4$/InP PECVD interface were chracterized by TEM and AES.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.271-277
• /
• 2008

The biofilm of white-rot fungi fully exposed in atmosphere are that operation is easy, management cost and energy waste is low. To develop biofilm of white-rot fungi fully exposed in atmosphere, basic test are as follows. To select most effective microoganism species, investigated treatment characteristics of wastewater containing non-biodegradable material for three species of white-rot fungi(Phanerochaete chrysosporium PSBL-1, Phanerochaete chrysosporium KCTC 6147, Trametes sp. KFCC 10941) and activated sludge. And then investigated attached and detached biomass of selected white-rot fungi species on HBC ring surface. Among the three strains tested, P. chrysosporium PSBL-1 and P. chrysosporium KCTC 6147 showed higher efficiency for organics removal than Trametes sp. KFCC 10941, and P. chrysosporium PSBL-1 showed higher efficiency for nitrogen removal than P. chrysosporium KCTC 6147 and Trametes sp. KFCC 10941. Respectively, 51$\sim$59.8%, 57.5$\sim$60.3% of NBDCOD was removed for P. chrysosporium PSBL-1 and P. chrysosporium 6147 in pH 3.5$\sim$5.5. TN removal efficiency showed 39.3$\sim$85.3%, 3.4$\sim$7.6% for P. chrysosporium PSBL-1 and P. chrysosporium 6147 in pH 4.5$\sim$11.5 respectively. Considered that white-rot fungi remove organism and nitrogen simultaneously, the microorganism selected white-rot fungi P. chrysosporium PSBL-1. White-rot fungi P. chrysosporium PSBL-1 attached on HBC ring surface 4,538 mg/L, 4,546 mg/L, 4,531 mg/L after 5 minutes, 4,575 mg/L, 4,573 mg/L, 4,568 mg/L after 10 minutes from initial MLSS 4,600 mg/L in pH 4, 7 and 10 respectively. Also detached biomass is negligible from right after attachment to 10 day in pH 4, 7 and 10.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.64-69
• /
• 2006

This study was conducted to determine the effect of pH adjustment on physico-chemical characteristics of chicken breast surimi. The chicken breast meat was ground with distilled water, of which pH was then adjusted to 2.5 (T1), 3.0 (T2), 10.5 (T3) and 11.0 (T4) for surimi manufacture, respectively. Water content was higher in order of T4>T1>T3>T2 (p<0.05). Crude protein and crude fat were higher in T3 and T4 compared with T1 and T2 (p<0.05). $L^*$ values, myofibrillar protein and water holding capacity of T2 and T4 were higher than those of T1 and T3 (p<0.05). T4 had the lowest yield among the treatments (p<0.05). T1 was higher in yield and pH, whereas breaking force and deformation were higher in T1 (p<0.05). $a^*$ was higher in order of T3>T2>T4>T1 and $b^*$ was lower in T1 compared with other treatments (p<0.05). In textural properties, the chewiness values of T2 and T3 were higher than those of T1 and T4, the hardness was higher in order of T2>T3>T4>T1 (p<0.05). Cohesiveness and gumminess of T1 showed higher values than those of other treatments (p<0.05). In sensory evaluation, the note for appearance was higher in T2 than other treatments (p<0.05), however other traits were not significantly different (p>0.05). Therefore, the alkaline processing (T4, pH 11.0) would be recommended.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.593-598
• /
• 2005

This work studied the loading capabilities and release behaviors of poly(ethylene-alt-maleic anhydride) (PEMAh)/poly(4-vinyl pyridine) (P4VP) multilayer films formed by the layer-by-layer(LbL) sequential self-assembly method, using Rodamine 6G(R6G) as an indicator. Thickness of the multilayer, and loading and subsequent release behavior of R6G from the multilayer were studied using UV-visible spectroscopy. The amount of R6G loaded in multilayer film increased linearly with increasing film thickness. pH-Sensitive permeability was observed, where lower pH environments increased both release rate and release amount. By additional assembling of PEMAh/poly(ethyleneimine) (PEI) capping layers on top of (PEMAh/P4VP)n multilayers, the release of R6G was better controlled.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6239-6244
• /
• 2012

Background: The basal cell carcinoma (BCC) is the most common non-melanoma skin cancer (NMSK). BCC might develop because of the faulty cell cycle arrest. $p15^{INK4b}$ is a tumor suppressor gene, involved in cell cycle arrest and inactivated in most human cancers. The role of $p15^{INK4b}$ protein expression in the genesis of BCC is as yet unknown. In a previous study we showed the absence of $p15^{INK4b}$ expression in the majority of tissue microarray cores of cutaneous squamous cell carcinoma (SCCs), another type of non-melanoma skin cancer, indicating that $p15^{INK4b}$ could possibly be involved in the pathogenesis of cutaneous SCC. The aim of this study was to investigate $p15^{INK4b}$ protein expression in BCCs. Materials and Method: Protein expression of $p15^{INK4b}$ in 35 cases of BCC tissue arrays and 19 cases of normal human skin tissue was studied using an immunohistochemical approach. Results: The expression of $p15^{INK4b}$ was not significantly different in the BCC cases as compared with normal human skin (p=0.356; p>0.05). In addition, there were no significant relationship between clinicopathologic variables of patients (age and sex) and $p15^{INK4b}$ protein expression. Conclusions: Our finding may indicate that $p15^{INK4b}$ protein expression does not play a role in the genesis of BCC.