This study was carried out to investigate effect of lipid metabolism in Viscum album lectin on rats. The lectin was purified by sepharose 4B affinity chromatography and gel filtration using sephadex G-150 with plant material from Viscum album collected in Mt. Duk Yui. After 72 h of $CCl_4$ injection (in olive oil, 1:1, 2 mg/kg) there was a significant increase in serum total cholesterol and triglycerige levels relative to the control group. However, treatment of both Viscum album and purified lectin were significantly decreased lipid parameters against the $CCl_4$-induced. Histological observation basically supported the result obtained from serum lipid assay. The livers of rats challenged with $CCl_4$ produced a marked increase of cytoplasmic vacuoles in number, while the number of necrotic cells and swollen hepatocytes did not change significnatly. Rats administered olive oil alone did not alter the normal hepatic architecture. Histological observation of the liver section in rats treated 72 h with either Viscum album purified lectin or $CCl_4$-induced liver lipogenesis showed decreased numbers of cytoplasmic vaculoes and necrotic cells. The normal hepatic architectural pattern was observed in Hematoxylin-eosin stain. These results suggest that Viscum album lectin has a possible protective effect of lipid metabolim in rats.
International Journal of Precision Engineering and Manufacturing
/
제4권5호
/
pp.27-33
/
2003
G-code, another name of ISO6983, has been a popular commanding language for operating machine tools. This G-code, however, limits the usage of today's fast evolving high-performance hardware. For intelligent machines, the communications between machine and CAD/CAM departments become important, but the loss of information during generating G-code makes the production department isolated. The new standard for operating machine tools, named STEP-NC is just about to be standardized as ISO14649. As this new standard stores CAD/CAM information as well as operation commands of CNC machines, and this characteristic makes this machine able to exchange information with other departments. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other prototypes of STEP-NC milling machines, this system uses the STEP-NC file in XML file form as data input. This machine loads information from XML file and deals with XML file structure. It is possible for this machine to exchange information to other databases using XML. The STEP-NC milling machines in this research loads information from the XML file, makes tool paths for two5D features with information of STEP-NC, and machines automatically without making G-code. All software is programmed with Visual $C^{++}$, and the milling machine is built with table milling machine, step motors, and motion control board for PC that can be directly controlled by Visual $C^{++}$ commands. All software and hardware modules are independent from each other; it allows convenient substitution and expansion of the milling machine. Example 1 in ISO14649-11 having the full geometry and machining information and example 2 having only the geometry and tool information were used to test the automatic machining capability of this system.
A study was carried out on the level of heavy metals, total coliform and benzo(a)pyrene that may be introduced through by-product fertilizers or air pollution to turfgrass in natural turfgrass playground in elementary schools around the western coast and eastern mountain areas in Jeollabuk-do, Korea. The level of heavy metals found in turfgrass was in the order of Cu > Zn > Pb > Cd. The majority of heavy metals was found in the roots. It is presumed that the absorption of some air pollutants and by-product fertilizers or chemical fertilizers. The level of benzo(a)pyrene showed an average of 0.05ng/g with a range between 0.02 to 0.08ng/g in the leaves. In the meantime, none was detected in the stems, while the average for roots was 0.02ng/g with a range between 0.01 and 0.03ng/g. The level detected is that found background level, however, benzo(a)pyrene can be introduced partly from the unstable combustion of fossil fuel or through vehicle emissions. Total coliform distributed in grass showed an average of 12MPN/100ml with a range between 2 and 36MPN/100ml. The density of total coliform displayed no regional predominance. However, in some urban areas, the density was slightly higher. The feces of pets or by-product fertilizers may have contributed to the input of pathogenic micro-organism. Yet the level was found to be negligible.
RC 구조물의 내구성능 피복두께의 변화뿐 아니라 배합조건에 따라 크게 변화한다. 고로슬래그 미분말은 유용한 혼화재료이며, 최근들어 염해에 대한 저항성을 확보하기 위해 많이 사용되고 있다. 본 연구는 고로슬래그 미분말을 30~70%로, 분말도를 $4,000{\sim}8,000cm^2/g$으로 변화시키면서 공극률, 압축강도, 확산계수의 변화를 분석하였다. 실험결과 고로슬래그 미분말을 혼입한 콘크리트는 보통 콘크리트에 비하여 조밀한 공극구조, 높은 강도발현과 확산계수 감소를 확보하였으며, 분말도보다 치환율에 더욱 민감하게 변화하였다. 고로슬래그 미분말 콘크리트에서 재령이 3일에서 91일로 증가함에 따라 공극률은 77.47% 수준으로 감소하였으며, 압축강도는 373%로 증가하였다. 또한 염화물 확산계수는 OPC 콘크리트의 64.4% 수준으로 감소하여 내구적 저항성이 크게 개선됨을 알 수 있었다.
최근 이상기후 등 기후변화에 적응하고 관상가치가 높은 상록활엽수의 활용을 높이기 위한 재배 및 관리 기술이 요구되고 있다. 종가시나무 (Quercus glauca Thunb.) 1-2묘를 공시수종으로 하여 10개월간 경남 진주시 금산면에 위치한 산림바이오소재연구소 월아 시험림에서 1m×22.5m 크기의 묘상을 만들어 부직포 멀칭 소재 60g/㎡, 80g/㎡ 두 종류와 멀칭 방식 겹치기, 구멍뚫기 두 방식 그리고 멀칭을 하지 않은 대조구 총 5개 처리구로 각각 92본씩 시험지를 조성하였다. 부직포 멀칭 소재 60g/㎡ 겹치기 방식은 대조구와 비교 시 묘고는 약 1.9배 근원경은 약 1.1배 더 높은 값을 보였으며, 처리 간의 통계적 유의성은 없었다. 건전한 묘목은 H/D ratio 7.0 이하, T/R ratio 3.0 이하, 부위별 물질 생산량 값이 높은 조건으로 분석 결과, 이를 만족하는 것으로 조사되었다. 멀칭 처리에 따른 묘목의 품질을 평가할 수 있는 LWR, SWR, RWR 값을 대조구와 비교해 보면, 잎과 줄기를 포함하는 지상부의 생장은 증진되었지만, 뿌리를 포함하는 지하부의 생장은 대조구 값이 높은 경향을 보였다. 이를 바탕으로 묘목의 종합적인 품질을 평가할 수 있는 SQI 값은 대조구와 멀칭 처리간의 유의적인 차이가 있는 것으로 나타나, 멀칭 처리에 따른 생육증진 효과가 있음을 확인하였다. 엽록소 함량 분석에서는 대조구와 유의적인 차이가 있는 것으로 나타났는데, 대조구의 잡초 발생이 환경스트레스로 작용하여 엽록소 함량의 저하를 야기한 것으로 판단된다. 부직포 멀칭 소재 80g/㎡ 겹치기 방식은 잡초 발생량이 대조구 대비 약 4배 더 적게 발생하며, 식재지 조성인력과 제초작업에 소요되는 총 작업인력은 3.3인/100㎡/1일이 소요되는 것으로 조사되었다. 멀칭처리는 묘목의 생장과 품질 그리고 제초에 유의적인 차이가 있는 것으로 나타나 생육증진 효과가 있으며, 대규모 식재지를 포함한 일반수목 생산지에서의 제초작업에 투입되는 인력수급의 경제적인 부담을 줄일 수 있는 대안으로 판단된다.
Current Design Codes for Reinforced Concrete (RC) interior beam-column joints are based on limited experimental studies on the seismic behavior of eccentric joints. To supplement existing information, an experimental study was conducted that focused on the effect of eccentricity of the deeper beams with respect to the shallow beams. A total of eight one-third scale interior joints with beams of different depths were subjected to reverse cyclic loading. The primary variables in the test specimens were the amount of joint transverse reinforcement and the cross section of the shallow beams. The overall performance of each test assembly was found to be unsatisfactory in terms of joint shear strength, stiffness, energy dissipation and shear deformation. The results indicated that the vertical eccentricity of spandrel beams in this type of joint led to lower capacity in joint shear strength and severe damage of concrete in the joint core. Increasing the joint shear reinforcement was not effective to alter the failure mode from joint shear failure to beam yielding which is favorable for earthquake resistance design, whereas it was effective to reduce the crack width at the small loading stages. Based on the observed behavior, the shear stress of the joint core was suggested to be kept as low as possible for a safe and practical design of this type of joint.
Precise modelling of the interaction of ions with materials is important for many applications including material characterization, ion implantation in devices, thermonuclear fusion, hadron therapy, secondary particle production (e.g. neutron), etc. In this study, a new approach using the Geant4 toolkit in combination with the Bayesian regularization (BR) learning algorithm of the feed-forward neural network (FFNN) is developed to estimate the range of ions in materials accurately and quickly. The different incident ions at different energies are interacted with the target materials. The Geant4 is utilized to model the interactions and to calculate the range of the ions. Afterward, the appropriate architecture of the FFNN-BR with the relevant input features is utilized to learn the modelled ranges and to estimate the new ranges for the new cases. The notable achievements of the proposed approach are: 1- The range of ions in different materials is given as quickly as possible and the time required for estimating the ranges can be neglected (i.e. less than 0.01 s by a typical personal computer). 2- The proposed approach can generalize its ability for estimating the new untrained cases. 3- There is no need for a pre-made lookup table for the estimation of the range values.
본 연구는 대규모 택지개발 예정지로 계획되어 있는 대구광역시 달성군 옥포면 논공읍 일대 약 $10km^2$를 대상으로 비오톱 유형분류를 기반으로 한 미 시각 측면에서의 경관가치 평가 모형을 설정해 보고, 이를 실사례지에 적용해 봄으로써 평가모형의 타당성을 검증해 보는데 가장 큰 의의를 두었다. 연구결과를 요약하면 아래와 같다. 비오톱 유형분류 결과, 평가대상이 되는 23개의 비오톱 유형과 이에 귀속되는 140개의 세부 비오톱 유형으로 분류되었다. 또한 평가지표 선정을 위한 설문조사는 1차, 2차, 3차 설문으로 나누어 수행하였다. 먼저 1차 설문분석은 우선 문헌연구 및 현장조사를 바탕으로 선정된 22개의 평가지표 항목들에 대한 중요도를 분석하는 단계이다. 다음으로 2차 설문분석은 요인분석을 실시, 내재된 상관관계를 이용하여 지표들을 재분류하였다. 3차 설문분석은 선정된 평가지표 항목의 가중치를 산정하는 단계로서, 평가지표 항목의 중요도 평균을 기준으로 합이 10이 되도록 표준화하는 방법을 사용하였으며, 2차 평가 시 각 지표항목의 점수에 가중치를 곱하여 최종 평가에 활용하였다. 이상과 같은 전문가 설문분석 결과, 최종 선정된 평가지표는 활력충전요소, 시각적 방해요소 등 총 19개 항목으로 조사되었다. 1차 평가 결과, 특별히 가치 있는 I등급은 식생이 풍부한 자연형 하천유형(D), 습지 및 늪지 유형(I) 등 총 7개 유형으로 나타났다. 또한 II등급으로는 식생이 풍부한 인공형 하천유형(E), 침엽수림 중심의 산림유형(Q) 등 총 4개 유형, III등급은 식생이 풍부한 자연형 실개천 및 도랑유형(F) 등 총 5개 유형으로 나타났다. 상대적으로 가치가 낮은 IV등급, V등급은 각각 식생이 빈약한 실개천 및 도랑유형(G) 등 총 2개 유형과 녹지가 빈약한 복합형 주거지역(B) 등 총 5개 유형으로 분석되었다. 2차 평가 결과, 경관 가치가 특별히 높은 비오톱 유형(1a, 1b)은 15개 공간으로 조사되었으며, 경관의 가치가 높은 유형(2a, 2b, 2c)은 총 28개 공간으로 분석되었다. 그러나 본 연구에서 제시된 경관평가 모형이 타 유사지역에서도 높은 적용성을 가지기에는, 본 연구에서 설정한 하나의 연구대상지만으로는 부족함이 있었던 바, 차후에는 다양한 사례지를 종합하고 표준화하여 객관성을 높여 나갈 필요가 있을 것으로 사료된다.
본 논문에서는 고성능 H.264/AVC 복호기 설계를 위해 디블록킹 필터의 수행시간 단축과 저전력 설계를 위한 필터링 순서 및 효율적인 메모리 구조를 제안하고 5단 파이프라인으로 구성된 필터의 설계에 대해 기술한다. 디블록킹 필터는 블록 경계에서 발생하는 왜곡을 제거하여 영상의 화질을 개선시키지만 하나의 경계에 여러 번 필터링을 수행하여 많은 메모리 접근과 반복되는 연산과정이 수반된다. 따라서 본 논문에서는 메모리 접근과 필터 수행 사이클을 최소화하는 새로운 필터 순서를 제안 하고 반복되는 연산의 효율적 관리를 위해 파이프라인 구조를 적용하였다. 제안하는 디블록킹 필터는 메모리 읽기, 임계값 계산, 전처리 연산, 필터 연산, 메모리 쓰기로 구성된 5단 파이프라인으로 구현되어 순차적인 필터 연산에 병렬적 처리가 가능하며 각 단계에 클록 게이팅을 적용하여 하드웨어 자원에 불필요한 전력을 감소시켰다. 또한, 적은 내부 트랜스포지션 버퍼를 사용하면서 필터링 순서를 효율적으로 개선하여 필터 수행을 위한 메모리 접근과 수행 사이클을 감소시켰다. 제안하는 디블록킹 필터의 하드웨어는 Verilog HDL로 설계 하였으며 기존의 복호기에 통합하여 Modelsim 6.2g 시뮬레이터를 이용해 검증하였다. 입력으로는 표준 참조 소프트웨어 JM9.4 부호기를 통해 압축한 다양한 QCIF영상 샘플을 사용하였다. 기존 필터들과 수행 사이클을 비교한 결과, 제안하는 구조의 설계가 비교적 적은 트랜스포지션 버퍼를 사용했으며 최소 20%의 수행 사이클이 감소함을 확인하였다.
The growth and biomass of reeds(Phragmites australis) growing in a subsurface treatment wetland system were investigated from April 2003 to October 2003. Nitrogen(N) and phosphorous(P) concentrations in above-ground(AG) and below-ground(BG) tissues of reeds were examined and the removal rate of N and P by reeds were analyzed. The system, 29 m in length, 9 m in width and 0.65 m in depth, was constructed in June 2001 on a floodplain in the down reach of the Kwangju Stream in Korea in order to purify polluted water of the stream. A bottom layer of 45 cm in depth was filled with crushed granites(15~30 mm in diameter) and a middle layer of 10 cm in depth was filled with pea pebbles(10 mm in diameter). An upper layer of 5 cm contained course sand. Reeds were transplanted on the surface of the system, which were dug out of natural wetlands, and their shoots were trimmed 40 cm in height. The height and density of the shoots averaged 237.7 cm and 244.0 shoot/$m^2$, respectively, when the reeds grew fully. The maximum biomass of AG and BG tissues were 1,964 and 1,577 g/$m^2$, respectively, and the AG : BG ratio of biomass was 1.26. Mean AG and BG dry weights were recorded as 1,355 and 748 g/$m^2$, respectively. The AG and BG tissue concentrations of N averaged 12.37 and 10.01 mg/g, respectively, and those of P 2.37 and 2.03 mg/g, respectively. Inflow to the system averaged 40 $m^3$/day. The concentrations of total nitrogen(T-N) in influent and effluent were 8.4 mg/L and 3.2 mg/L, respectively, and those of total phosphorous(T-P) were 0.73 and 0.38 mg/L, respectively. The total removal of T-N and T-P by the system during the investigation period averaged 140.2 and 9.7 g/$m^2$, respectively, and the total uptake of N and P by the reeds were calculated as 24.39 and 4.73 g/$m^2$, respectively. Average removals of about 17% of N and about 49% of P by reeds were recorded. The N and P concentrations in AG tissues were significantly different among the three zones of the system:near to inflow(St1), in the middle of system(St2), and near to outflow(St3). The N and P concentrations in BG tissues were also significantly different among St1, St2 and St3. N and P concentrations in AG and BG tissues of reeds growing in St1 were higher than those in St2 and St3. The height and density of shoots of reeds in St1 were larger than those in St2 and St3. Significant amounts of N and P in the influent were taken up by reeds in St1.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.