• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2789-2800
• /
• 1996

Real time fractal coding for successive QCIF 144*176 luminance images has been implemented on a 50MHz IBM 486 personal computer. To satisfy the frame encoding speed and data compression ratio, following algorithms are adopted. In order to minimize encoding time, extension SAS being not searching of domain blocks is used. for reducing the bits per pixel, conventioal 4*4 range block is extended to 8*8 range block. and range block extension decrease quality of decoded image. For improvement quality of decoded image, the paper apply quad-tree partition mothod. In order to divide **8 range block, self-simiarity is compared 8*8 range block with spatial contractive transformed 8*8 domain block. According to self-simiarity, the block is partitioned and owing to block partition, increased encoding time is minimized. According to self-simiarity of 8*8 range block and spatial contractive transformed 8*8 domain block, number of fractal factor is varied. Simultaneously with minimizing the decrement of decoded image's quality, transmittion rate and encoding time is shorted. The results enable us to process the real-time fractal coding. For the claire test image, the average PSNR was 32.4dB, 0.12 bit rates and 33ms coding time per frame.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.543-552
• /
• 1996

The goal of this paper is to developed a DSP based power analyzing and control system by 3-Dimensional (3-D) space current co-ordinates. A developed system is made up of 486-PC and DSP (Digital Signal Processor) board, Active Power Filter, Non-linear thyristor load, and Power analyzing and control program for Windows. Power is analyzed using signal processing techniques based on the correlation between voltage and current waveforms. Since power analysis algorithm is performed by DSP, power analysis is achieved in real-time even under highly dynamic nonlinear loading conditions. Combining control algorithm with power analysis algorithm is performed by DSP, power analysis is achieved in real-time even under highly dynamic nonlinear loading conditions. Combining control algorithm with power analysis algorithm, flexibility of the proposed system which has both power analysis mode and control mode, is greatly enhanced. Non-active power generated while speed of induction motor is controlled by modulating firing angle of thyristor converter, is compensated by Active Power Filter for verifying a developed system. Power analysis results, before/after compensation, are numerically obtained and evaluated. From these results, various graphic screens for time/frequency/3-D current co-ordinate system are displayed on PC. By real-time analysis of power using a developed system, power quality is evaluated, and compared with that of conventional current co-ordinate system. (author). refs., figs. tabs.

• 대한음성학회지:말소리
• /
• 제52호
• /
• pp.111-120
• /
• 2004

This paper focuses on the DSP implementation of an HMM-based speech recognizer that can handle several hundred words of vocabulary size as well as speaker independency. First, we develop an HMM-based speech recognition system on the PC that operates on the frame basis with parallel processing of feature extraction and Viterbi decoding to make the processing delay as small as possible. Many techniques such as linear discriminant analysis, state-based Gaussian selection, and phonetic tied mixture model are employed for reduction of computational burden and memory size. The system is then properly optimized and compiled on the TMS320C6711 DSP for real-time operation. The implemented system uses 486kbytes of memory for data and acoustic models, and 24.5 kbytes for program code. Maximum required time of 29.2 ms for processing a frame of 32 ms of speech validates real-time operation of the implemented system.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1993년도 학술논문발표회 논문집 제12권 1호
• /
• pp.229-232
• /
• 1993

이 논문은 최근에 개발된 실시간 음성부 검출 알고리즘[1]을 TMS320C30 System board와 IBM PC486을 이용한 implementation에 관한 논문이다. 음성부 검출 알고리즘은 Energy와 LCR(Level Crossing Rate)를 이용하여 각 frame을 음성/묵음으로 분류하는 방법을 사용하였고 DSP 보드를 사용하여 한 frame이 입력되면 다음 frame이 입력되기 전에 그 frame에 대한 음성/묵음 분류를 하여 음성입력이 끝남과 동시에 음성이라고 판단되는 부분만을 DPS moemory상에 저장하므로 불필요한 memory의 낭비를 중이고 다음 단계의 음성처리를 위한 시간을 절약하였다. 이 알고리즘의 성능 평가를 위하여 Rabiner와 Sambur의 알고리즘과 한민수의 알고리즘과를 전문가가 수작업으로 찾아낸 결과와 비교 평가하였다. 알고리즘의 오차는 평균 남성 4.925ms, 여성 5.85ms로 1 frame 이내의 오차를 보였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 제11회 음성통신 및 신호처리 워크샵 논문집 (SCAS 11권 1호)
• /
• pp.91-94
• /
• 1994

This paper is a study on the design and implementation of the Korean Tet-to-Speech system. In this paper, parameter symthesis method is chosen for speech symthesis method and PARCOR coeffient, one of the LPC analysis, is used as acoustic parameter, We use a diphone as synthesis unit, it include a basic naturalness of human speech. Diphone DB is consisted of 1228 PCM files. LPC synthesis method has defect that decline clearness of synthesis speech, during synthesizing unvoiced sound In this paper, we improve clearness of synthesized speech, using residual signal as ecitation signal of unvoiced sound. Besides, to improve a naturalness, we control the prosody of synthesized speech through controlling the energy and pitch pattern. Synthesis system is implemented at PC/486 and use a 70Hz-4.5KHz band pass filter for speech imput/output, amplifier and TMS320c30 DSP board.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.63-70
• /
• 1994

A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors'reporting results. Input int'ormation was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and Analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed id'ormation can be transferred for patient diagnosis through LAN (local area network).

• 대한의용생체공학회:의공학회지
• /
• 제9권2호
• /
• pp.247-250
• /
• 1988

Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.65-76
• /
• 1996

This paper describes the issue relating to the design and implementation of a high-precision vision system for monitor inspection. We present several monitor inspection algorithms which evaluate the geometric distrotions of the patterns on the inspection target monitor. Also, to inspect color distortion acquired form color CCD camera into the XYy coordinate, accurately. The proposed monitor inspection system is implemented on IBM PC/486, and the user interface is developed on microsoft windows to assist unskilled users for easy use. Using the developed vision system, Experiments on the inspection accuracy and speed were performed and the results are presented.

• 치과방사선
• /
• 제24권1호
• /
• pp.31-35
• /
• 1994

전남대학교 치과진료처에 내원한 환자의 구내방사선사진중 1단계 (Cl: 30개 병소)또는 2단계(C2: 213.8병소)의 인접면 치아우식을 가진 방사선사진 168장을 연구대상으로 하였다. 이들 방사선사진은 코닥사의 Ektaspeed(E group) 필름을 사용하여 평행촬영법으로 촬영하였다. 168장의 방사선사진에 대하여 1단계 및 2단계 치아우식증을 4명의 구강악안면방사선학을 전공한 치과의사들이 같이 판독하여 그 결과를 기록하였다. 또한 168장의 방사선사진을 필름-비디오 변환장치를 이용하여 디지털 영상으로 전환하였다. 이때 486 DX PC에 PCVision과 frame grabber를 이용하였다. 각각의 구내방사선사 진영상은 17"크기의 1280×768픽셀의 해상도를 갖는 모니터상에서 256단계 흑화도를 갖는 700×480픽셀로 제시되었다. 모니터상에서의 치아우식 판독 결과를 구내방사선사진 판독 결과와 비교하였다. 그 결과 sensitivity는 0.98이었다. 1단계 치아우식은 0.87, 2단계 치아우식 은 1.00의 sensitivity를 나타내었다.

• 한국음향학회지
• /
• 제12권3호
• /
• pp.13-25
• /
• 1993

본 논문은 음성 다이얼링 시스템을 구현하기 위한 연결어 인식에 관한 연구이다. 적용된 인식 알고리즘은 기준패턴을 생성할 때 DMS 모델을 이용한 One-stage DMS/DP 알고리즘이고, 인식 대상어는 광운대학교 부서명 150 단어이다. 연결어 인식을 실시간으로 처리하기 위한 방법으로써 본 논문에서는 음절과 단어 단위의 DMS 템플리트를 구성하여 실험하였고 이 실험결과로부터 실시간과 인식률을 고려한 최적의 인식은 단어단위 템플리트에서 20 구간의 DMS 템플리트를 구성하여 실험하였고 이 실험결과로부터 실시간과 인식률을 고려한 최적의 인식은 단어단위 템플리트에서 20구간의 DMS 모델을 적용하였을 때 수행되었고, 이때 다중화자종속과 화자독립의 인식률은 각각 97.2%, 86.8%이다. 실험된 결과를 이용하여 음성 다이얼링 모델 시스템을 DSP 전용칩인 TMS320C30 프로세서를 내장한 DSP 보오드, 486 PC와 DIAL 모뎀을 이용해서 구현하였고, 전체 다이얼링 시간은 약 7~14초가 소요되었다.