• Title/Summary/Keyword: 400 mH

Search Result 937, Processing Time 0.03 seconds

Quality Characteristics of Extracted Coffee with Cold Water according to Water Quantity and Dilution Ratio (가수량 및 희석 비율을 달리하여 제조한 냉수 추출 커피의 품질 특성)

  • Jeong, Ji-Gyun;Cho, Yeon-Sook;Kwak, Eun-Jung
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.24 no.1
    • /
    • pp.109-115
    • /
    • 2014
  • This paper investigated the optimal conditions for coffee extraction and dilution by comparing differences in soluble compounds and sensory characteristics of coffee subjected to cold-water extraction according to water quantity and dilution ratio. For sample preparation, we extracted coffee for 3 to 10 hours by adding 400 mL, 600 mL, 1,000 mL and 1,800 mL of cold water ($20^{\circ}C$) to 100 g of ground coffee, resulting in 200 mL, 400 mL, 800 mL and 1,600 mL portions of extracted coffee, respectively. Following this, the 200 mL, 400 mL and 800 mL portions of extracted coffee were further diluted with 1,400 mL, 1,200 mL and 800 mL of cold water, resulting in ratios of coffee to cold water of 1:7, 1:3 and 1:1, respectively. The 1,600 mL of portion of extracted coffee was not diluted and used as a sample. Undiluted coffee showed the highest values for pH, acidity, reducing sugar, total soluble solids and total phenolic compounds among all sample coffees, whereas the highly diluted coffee with a high ratio of 1:7 showed the lowest values. In a descriptive test, odor, sourness, bitterness and body intensity were also the highest in undiluted coffee due to the overly extracted coffee compounds. Undiluted coffee showed the lowest preference in terms of aroma, aftertaste and balanced coffee taste. On the other hand, diluted coffee at a ratio of 1:7 showed the lowest values for odor, sourness, bitterness and body intensity. Diluted coffee at a ratio of 1:3 showed the highest values for sweetness and acidity and was the most preferred in terms of aroma, aftertaste and balance. As a result, our study concluded that the optimal conditions for extraction and dilution of coffee with cold water are a ratio of ground coffee to cold water of 1:6 (w/v), followed by further dilution of the coffee by cold water at a ratio of 1:3.

Effect of Diluents on the Cold Storage of Sperm in Sea Urchin, Hemicentrotus pulcherrimus (말똥성게, Hemicentrotus pulcherrimus 정자의 냉장보존에 미치는 희석액의 효과)

  • Kho Kang-Hee;Kang Kyoung Ho;Kim Jae-Min
    • Development and Reproduction
    • /
    • v.7 no.1
    • /
    • pp.9-13
    • /
    • 2003
  • A series of experiments were conducted to compare the effects of various diluents in cold storage on the sea urchin, Hemicentrotus pulcherimus sperm. Various diluents of glucose solutions, artificial sea water(ASW) and 50% ASW were used to store the sperm at 4$^{\circ}C$. The storage effect was evaluated using sperm activity index(SAI), survival rate of sperm and fertilization rate to egg. ASW and 1.2 M glucose were found to be better diluents which maintained high motility and survival rate of sperm f3r a storage period of 30 days. Optimal pH of diluent to store the sperm at 4$^{\circ}C$ is 7.0∼8.0. In order to keep high SAI and survival rate of sperm, addition of 400 ppm neomycin into the diluent revealed the best storage results.

  • PDF

Hemispherical Grained Silicon formation Condition on In-Situ Phosphorous Doped Amorphous-Si Using The Seeding Method (Seeding Method를 이용한 인이 도우핑된 Amorphous-Si에서의 HSG형성 조건)

  • 정양희;강성준
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.6
    • /
    • pp.1128-1135
    • /
    • 2001
  • In this paper, a new HSG-Si formation technology, "seeding method', which employs Si$_2$H$_{6}$-molecule irradiation and annealing, was applied for realizing 64Mbit DRAMs. By using this technique, grain size controlled HSG-Si can be fabricated on in-situ phosphorous-doped amorphous-Si electrode. The new HSG-Si fabrication technology achieves twice the storage capacitance with high reliability for the stacked capacitors. In this technique, optimum process conditions of the phosphorous concentration, storage polysilicon deposition temperature and thickness of hemispherical grain silicon are in the range of 3.0-4.0E19atoms/㎤, 53$0^{\circ}C$ and 400$\AA$, respectively. In the 64M bit DRAM capacitor using optimum process conditions, limit thickness of dielectric nitride is about 65$\AA$.

  • PDF

Cavitation Erosion-Corrosion Characteristics in Seawater of Heat-Treated Electroless Nickel Plating Layer (열처리된 무전해 니켈도금 층의 해수 내 캐비테이션 침식-부식 손상 특성)

  • Park, Il-Cho;Kim, Seong-Jong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.108-108
    • /
    • 2018
  • 무전해 니켈도금 층은 마모, 마찰, 스크래치, tribology 등에 대한 내구성뿐만 아니라 내식성도 우수하여 산업현장에서 널리 적용되고 있다. 일반적으로 무전해 니켈도금 층의 내구성은 경도 값과 직접적인 상관관계를 가지며, 그 값은 약 $400-500H_V$ 정도이다. 이러한 무전해 도금 층에 대하여 약 $400^{\circ}C$에서 1시간 정도 열처리를 실시하면 경도 값은 약 $800-1000H_V$ 정도로 현저히 증가되고 내구성 역시 크게 향상시킬 수 있다. 그러나 해양환경에서 발생되는 캐비테이션 침식 부식에 대한 무전해 니켈도금 층의 열처리에 관한 연구는 거의 전무한 상태이다. 따라서 본 연구에서는 회주철의 캐비테이션 침식 부식을 방지하기 위해 무전해 니켈도금 후 다양한 온도와 시간으로 열처리를 실시하여 도금 층의 캐비테이션 침식 부식 특성을 평가하고자 하였다. 무전해 니켈코팅을 위한 모재는 회주철(FC250)을 $19.5mm{\times}19.5mm{\times}5mm$의 크기로 가공하였다. 도금조로 500mL 비커를 사용하였으며, 모든 시험편은 2시간 동안 무전해 니켈도금을 실시하였다. 그리고 캐비테이션 실험은 ASTM G32 규정에 의거하여 천연해수 내 $30^{\circ}C$에서 $50{\mu}m$의 진폭으로 실시하였다. 그 결과 열처리 적용 시 EN 도금의 표면경도가 현저히 증가하여 캐비테이션 침식 부식 저항성이 상당히 개선되었다.

  • PDF

Preparation of Porous Graphite Using Magadiite Template (Magadiite 주형을 이용한 다공성 흑연의 합성)

  • Choi, Seok-Hyon;Jeong, Soon-Yong;Kim, Jin-Young;Kwon, Oh-Yun
    • Applied Chemistry for Engineering
    • /
    • v.16 no.4
    • /
    • pp.576-580
    • /
    • 2005
  • Porous graphite was prepared by elimination of the template after pyrolysis of PFO (pyrolized fuel oil) with catalyst Cobalt(II)-ethylhexanoate in interlayer space of magadiite template. Pyrolysis was conducted for 3~24 h at $900{\sim}1100^{\circ}C$. Graphite was well crystallized with increased pyrolysis time and temperature. Specific surface area was $261{\sim}400m^2/g$ depending upon mixing ratios, pyrolysis temperature, and pyrolysis time.

Impact of Physical, Chemical and Biological Factors on Lily (Lilium longiflorum cv. Georgia) Pollen Growth and GUS Expression Via Agro-infiltration (물리적, 화학적, 생물적 요인에 의한 백합 (Lilium longiflorum cv. Georgia) 화분의 생장 및 Agro-Infiltration을 이용한 GUS 발현)

  • Park, Hee-Sung
    • Journal of Plant Biotechnology
    • /
    • v.31 no.4
    • /
    • pp.279-283
    • /
    • 2004
  • To lily (Lilium longflorum cv. Georgia) pollen, impacts by some physical, chemical and biological factors were examined in respects of its growth and transient gene expression via agro-infiltration. Rolling movement in liquid medium or vacuum pressure during Agro-infiltration was regarded as a impact that should be minimized for normal pollen growth. Pollen growth was maintained well in relatively broad range of temperature (19 to 27$^{\circ}C$) or pH (5.0 to 8.0). Chemical factors such as cefotaxime (up to 300mg/L), acetosyringone (up to 800 $\mu$M) and syringealdehyde (up to 800 $\mu$M) did not show any harmful effects but kanamycin severely did even at concentration as low as 25mg/L in some cases. For GUS gene expression, acetosyringone at 200 to 400 $\mu$M slightly improved the efficiency while syringealdehyde did not. Brief agro-infiltration followed by 18 hr of co-incubation of pollen along with Agrobacterium was suggested as a condition basically required for the transient expression system using lily pollen regardless of the presence of acetosyringone.

The Study on the Electrochemical Polarization Characteristics of Hydrogen Embrittlement for Ferrite Stainless Steel with Welding Conditions (용접조건에 따른 페라이트 스테인리스강에 대한 수소취성의 전기화학적 분극특성에 관한 연구)

  • Choi, Byung-Il;Lim, Uh-Joh
    • Journal of the Korean Institute of Gas
    • /
    • v.9 no.4 s.29
    • /
    • pp.30-35
    • /
    • 2005
  • In order to examine the electrochemical polarization characteristics of hydrogen embrittlement far STS444 with welding conditions, this paper carried out the accelerated hydrogen osmosis test and the electrochemical polarization test. That is, in $0.5M\; H_2SO_4+0.001M\;As_2O_3$ solution, the hydrogen embrittlement behavior of STS444 added to load of $1,400kg/cm^2$ together with hydrogen osmosis by current of $30mA/cm^2$ far 60 min. was considered. In researching the electrochemical polarization characteristics of hydrogen embrittlement for STS444 with welding conditions, the previous study clarified that tensile strength or elongation became low influenced by absorption of oil or water before welding. In this paper, we proposed the advanced mechanism of hydrogen embrittlement that integrated electrochemical corrosion with the existing mechanism of hydrogen embrirtlement.

  • PDF

Synthesis of Potassium Octatitanate Whisker from Natural Rutile Ore using the Ion Exchange Reaction (금홍석으로부터 이온교환에 의한 Potassium Octatitanate Whisker의 합성)

  • Lee, Chul-Tae;Lee, Jin-Sik;Ko, Du-Wan;Kim, Hyun-Joong
    • Applied Chemistry for Engineering
    • /
    • v.8 no.3
    • /
    • pp.446-453
    • /
    • 1997
  • The initial product was prepared by heating for 3 hrs at $1000^{\circ}C$ using a mixture of the rutile sand and industral $K_2CO_3$ in the molar ratio 2.0. And the intermediate product, fibrous potassium tetratitanate of layer structure, was obtained by the boiling water treatment of 10hrs for initial product using the calcination method. Also $KHTi_4O_9{\cdot}1.1H_2O$ was synthesized by ion exchange reaction through the acid treatment for 30 min at 0.005M HCl solution and then $K_2Ti_8O_{17}$ whisker of $length=10{\mu}m$, $diameter=0.2{\mu}m$ was synthesized by heat treatment at temperature range of $400{\sim}600^{\circ}C$.

  • PDF

Growth of Cucumber Plug Seedlings as Affected by Photoperiod and Photosynthetic Photon Flux$^{+}$ (오이 플러그묘의 생장에 미치는 광주기와 광합성유효광량자속의 영향$^{+}$)

  • 김용현;박현수
    • Journal of Bio-Environment Control
    • /
    • v.11 no.1
    • /
    • pp.40-44
    • /
    • 2002
  • A prototype of closed-type transplant production system(CTTPS) with fully environmental control was developed to produce massively quality transplants. Four photosynthetic photon flux(PPF) levels of 200,300,400 and 500$\mu$mol . m$^{-2}$ .s$^{-1}$ , four photoperiod levels of 1816 h,12/12h, 9/15 h and 6/18 h were provided to analyze the growth and development of cucumber plug seedlings(Cucumis sativus L., cv. Kyuewosalichungiang) as affected by PPF and photoperiod in a CTTPS. Effect of photoperiod on the growth and development of cucumber plug seedlings produced in a CTTPS was higher than PPF, Stem diameters dry weight of shoot and roots number of leaves, leaf with and length, and SPAD value of cucumber plug seedlings produced in a CTTPS were significantly high as compared to the control. But stem length of plug seedlings produced in a CTTPS was shorter than those of the control. Growth characteristics of cucumber plug seedlings raised at photoperiod of 6/18 h and PPF of 200$\mu$mol . m$^{-2}$ .s$^{-1}$ were similar to the those of the control. These results suggest that cucumber quality transplant can be produced at relatively short photoperiod and low PPF, It means that the electric energy consumed for the production of cucumber plug seedlings in a CTTPS can be saved.

Effect of h-BN Content on Microstructure and Mechanical Properties of Si3N4 (질화규소의 미세조직과 기계적 성질에 미치는 h-BN 첨가의 영향)

  • 김승현;이영환;조원승;김준규;조명우;이은상;이재형
    • Journal of the Korean Ceramic Society
    • /
    • v.40 no.9
    • /
    • pp.867-873
    • /
    • 2003
  • $Si_{3}N_{4}$-BN based machinable ceramics were fabricated by hot-pressing at $1800^{\circ}C$ for 2 h under a pressure of 25 MPa. The microstructure, mechanical properties, and machinability were investigated. With increasing h-BN content from 5 vol% to 30 vol%, three point flexural strength decreased from 1000 MPa of monolithic S $i_3$ $N_4$ to 720~400 MPa. The fracture toughness, $K_{IC}$ , was decreased from 7.6 MPaㆍ$m^{1/2}$ of monolithic S $i_3$ $N_4$ to 6.5~4.1 MPaㆍ$m^{1/2}$. The grain size and aspect ratio of $\beta$-S $i_3$ $N_4$ slightly decreased with increasing h-BN content. S $i_3$ $N_4$ monolith could not be machined due to brittle fracture, but S $i_3$ $N_4$-BN based machinable ceramics could be machined without fracture, showing excellent machinability. With increasing h-BN content, the thurst force during cutting and micro-drilling process was decreased.