• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제43권5호
• /
• pp.128-136
• /
• 2006

In this paper, design and implement 50W Doherty power amplifiers for 3GPP repeater and base station transceiver system. Efficiency improvement and high power property of ideal Doherty power amplifier is distinguishable; however bias control for implementation of Doherty(GDCHD) amplifier is difficult. To solve the problem, therefore, GDCHD(Gate and Drain Control Hybrid Doherty) power amplifier is embodied to drain bias adjustment circuit to Doherty power amplifier with gate bias adjustment circuit. Experiment result shows that $2.11{\sim}2.17\;GHz$, 3GPP operating frequency band, with 57.03 dB gain, PEP output is 50.30 dBm, W-CDMA average power is 47.01 dBm, and -40.45 dBc ACLR characteristic in 5MHz offset frequency band. Each of the parameter satisfied amplifier specification which we want to design. Especially, GDCHD power amplifier shows proper efficiency performance improvement in uniformity ACLR than Doherty power amplifier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제40권12호
• /
• pp.2427-2433
• /
• 2015

A high-gain circularly-polarized patch antenna with a double-layered superstrate is proposed operating at a wireless LAN frequency. A superstrate has an array of metallic periodic unit cells and is located above the patch antenna with an air-gap. The designed antenna has a high gain of over 9.59dBi, which is the gain enhancement of 6.48dB compared to the patch antenna without superstrate. And it has a low axial ratio of under 3dB, so that it maintains the circular polarization of the patch antenna. The optimum air-gap height at the superstrate of $4{\times}4$ arrays is 25mm, which is equivalent to about $0.2{\lambda}$ at the frequency of 2.45GHz. We confirmed that the double-layered stacking of a superstrate increases the effective aperture size and hence it leads to enhance a gain of the patch antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제16권7호
• /
• pp.732-739
• /
• 2005

In this paper, the design and implementation of the Ka-band(20/30 GHz) waveguide diplexer with an E-plane T-junction are described. The waveguide diplexer consists of a transmit filter and a receive filter combined to the antenna port via an E-plane T-junction. The reason why the E-plane T-junction structure was selected is to reduce PIM(Passive Intermodulation) level as the split-plane is located in the low electrical current zone. The optimization was performed using the equivalent circuit so that the computation time might reduce. The structure of the diplexer was designed to handle high power and the multipaction analysis was performed. The multipaction margin was greater than 12 dB and satisfied with ESA/ESTEC recommendation. The manufactured diplexer shows minimum return loss of 22 dB, maximum insertion loss of 0.20 dB and maximum isolation of -40 dB for both transmitted receive bands. Those mean the analysis results of the waveguide diplexer were well agreed with the electrical performance test.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제43권4호
• /
• pp.52-57
• /
• 2006

In this paper, the triple-band planar monopole antennas are designed for cellular communication, WiBro and WLAN(IEEE802.11b/g) communication and WLAN(IEEE802.11a) communication of 5GHz band to using filled mobile convergence subscriber unit. Various types of antennas are designed and examined experimentally as bended in the low and middle band radiation elements to decrease antennas size and increased the width of radiation elements to improve bandwidth The proposed antennas are reduced by 11% in antenna size with bended low-band radiation elements down and are extended by $30%{\sim}40%$ in bandwidth by increasing the width of the radiation element at 800MHz band.

• Korean Journal of Optics and Photonics
• /
• 제8권4호
• /
• pp.327-332
• /
• 1997

We fabricated the high speed 1.55${\mu}{\textrm}{m}$ distributed feedback laser diodes (DFB-LD) using both two-step mesa etching process and semi-insulating InP current blocking layers. The devices characteristics were threshold current of ~15mA, slope efficiency of ~0.13mW/mA, and dynamic resistance of ~6.0Ω, with as-cleaved facets. The fabricated DFB-LD showed the single longitudinal mode with more than 40dB up to 6 $I_{th}$(CW condition), emitting at the wavelength of 0.546${\mu}{\textrm}{m}$. The -3dB bandwidth was >10㎓ at the driving current of 27mA, and the maximum -3dB bandwidth was ~18㎓ at 90 mA current, showing the superior frequency response of SI-PBH DFB-LD. In the 10Gb/s transmission experiment for 1.55${\mu}{\textrm}{m}$ DFB-LD module, maximum 10 km of single mode fiber(SMF) or 80 km of dispersion shifted fiber (DSF) could be transmitted with error free.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.335-340
• /
• 2005

In this paper, the triple-band planar monopole antennas are designed for cellular communication, WiBro and WLAN(IEEE802.llb/g) communication and WLAN(IEEE802.lla) communication of 5GHz band. Various types of antennas are designed and examined experimentally as bended in the low and middle band radiation elements to decrease antennas size and increased radiation elements width to improve bandwidth. The proposed antennas are improved by 11% in antenna size with bended low-band radiation elements down and are extended by 30%$\sim$40% in bandwidth by increasing the width of the radiation element at 800MHz band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권4호
• /
• pp.484-491
• /
• 2008

In this paper, we design and fabricate the L-band high speed pulsed HPA using LDMOS FET. And we propose the high voltage and high speed switching circuit for LDMOS FET. The pulsed HPA using LDMOS FET is simpler than using GaAs FET because it has a high gain, high output power and sin81e voltage supply. LDMOS FET is suitable for pulsed HPA using switching method because it has $2{\sim}3$ times higher maximum drain-source voltage(65 V) than operating drain-source voltage($V_{ds}=26{\sim}28\;V$). As results of test, the output peak power is 100 W at 1.2 GHz, the rise/fall time of output RF pulse are 28.1 ns/26.6 ns at 2 us pulse width with 40 kHz PRF, respectively.

• Journal of Navigation and Port Research
• /
• 제28권6호
• /
• pp.497-501
• /
• 2004

In this paper, it is presented a level sensor for measuring a level of the contents of cargo tank using frequency modulated continuous wave(FMCW). The frequency range is 10∼11 GHz, the radar cross section(RCS) of test target is $0.8\textrm{m}^2$ of metal plate. The experiment is performed in laboratory and open ground, the sweep time of the signal is 100 ms, the pyramidal horn antenna of about 22 dBi gain is used, and input power of antenna is about 8 dBm The beat frequency according to the target moving to 40 m is measured. There is a good agreement between measured and calculated results. But the resolution of the FMCW radar is measured about 10 cm due to nonlinear of voltage controlled oscillator(VCO).

• Journal of Advanced Navigation Technology
• /
• 제20권6호
• /
• pp.503-510
• /
• 2016

In recent years, owing to the growing user demand for the two-way internet service based on the move global broadband communications, a new type of satellite terminal has developed, known as earth station in motion (ESIM). This service was required by Resolution 158 (WRC-15) to study on the coexistence with the co-primary fixed service (FS) in 27.5-29.5 GHz as a FSS uplink. In this paper, four scenarios was introduced to account for the antenna pointing error and the azimuth for an analysis on the sharing between ESIM and FS. From analysis results, the required separation distance between two systems should be about 32~52 km according to the elevation angles of $20^{\circ}{\sim}40^{\circ}$ using thresholds of 5% and 10% outage probability. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the pointing error of ESIM to minimize the required separation distance and to protect the co-primary FS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제18권8호
• /
• pp.1102-1107
• /
• 1993

Microwave dielectric properties of CaTiO3 and CaTiO3-TiO2 ceramics for the composition range between 40 and 50 mol% CaO in CaO-TiO2 binary system were investigated. CaTiO3 ceramics with50 mol% CaO showed the dielectric constant (e,) of 178, the temperature coefficient of resonant frequency(c,) of+1000 ppm/'c and the qualify factor Q of 2760 (f0=2.7 GHz ). Dielectric constant and temperature coefficient of resonant frequency of ceramics with dual phases of CaTiO3 and TiO2 decreased gradually from those of CaTiO3 as the CaO content decreased. Q value and density were found to have minimum at the composition of 47 mol% CaO. The degradation of Q value and density in dual phase ceramics seems to be caused by the large pores at grain boundaries and/or within grains remained after rapid growth of CaTiO3 grains as TiO2 Phase decreased.