• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.1
• /
• pp.48-52
• /
• 2011

Over the years, traditionally, six-switch three-phase inverters have been widely utilized for variable speed alternating current motor drives. Recently, some efforts have been made on the application of four-switch three phase inverter for uninterruptible power supply and variable speed drives. This is due to some advantages of the four-switch three phase inverter over the conventional six-switch three-phase inverters such as reduced price due to reduction in number of switches, reduced switching losses, reduced number of interface circuits to supply logic signals for the switches, simpler control algorithms to generate logic signals, less chances of destroying the switches due to lesser interaction among switches, and less real-time computational burden. However such as slow di/dt and speed limitation, are the inherent characteristics and main drawbacks of the four-switch configuration. Those problems can be overcome in conjugation with Voltage-doublers which has additional advantage, such as unity power factor correction.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.17-27
• /
• 1995

The tact switch is widely used in electric and electronic products. The dome type tact spring is produced by stamping. Stamping of the tact spring and operation of the tact switch have been simulated by the elasto-plastic finite element method. The operating characteristics of the switch may be given by the relation between the operating force and stroke. For a given material, this is affected by two main factors. One is the geometry of dome spring which is determined by the geometry of stamping dies and the stamping pressure, and another one is the dimension of switch. From the calculation, it was possible to obtain the stamping conditions and switch dimension for a predetermined force-stroki relation And, the hoop stresses and effective strains distributions due to the stamping and during the operation of the switch indicate a possibility of cracking in the center and rim of dome spring.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.1-8
• /
• 1999

This paper proposes an ATM switch architecture called Output Queued Batcher-Banyan switch (OQBBS). It consists of a Sorting Module, Expanding Module, and Output Queueing Modules. The principles of channel grouping and output queueing are used to increase the maximum throughput of an ATM switch. One distinctive feature of the OQBBS is that multiple cells can be simultaneously delivered to their desired output. The switch architecture is shown to be modular and easily expandable. The performance of the OQBBS in terms of throughput, cell delays, and cell loss rate under uniform random traffic condition is evaluated by computer simulation. The throughput and the average cell delay are close to the ideal performance behavior of a fully connected output queued crossbar switch. It is also shown that the OQBBS meets the cell loss probability requirement of $10^{-6}$.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.23-28
• /
• 2007

In this paper, we propose ATM switch structure including AAL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of AAL cells which consist of AAL type 1, AAL type 2, AAL type 3/4, and AAL type 5 cells. We propose two switch fabric methods; One supports the AAL type 2 cell processing per input port, the other global AAL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a strong point for easy implementation and extensibility. The proposed ATM switch fabric architecture is applicable to mobile communication, narrow band services over ATM network.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.45-56
• /
• 2004

In this paper, we propose ATM switch architecture including ALL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of m cells which consist of ALL type 1. ALL type 2, ALL type 3/4 and ALL type 5 cells. We propose two switch fabric methods; One supports the ALL type 2 cell processing per input port, the other global ALL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a merit for easy implementation and extensibility. In this paper, the AAL Type 2 switch module which adapts the former method is designed using VHDL language and implemented in FPGA chip. The designed AAL Type 2 switch module operates at 52MHz. The proposed ATM switch fabric is widely applicable to mobile communication, narrow band services over ATM network and wireless ATM as well as general ATM switching fabric.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.73-79
• /
• 1999

Semiconductor optical switch modules of 1$\times$2, 1$\times$4, and 4$\times$4 types for 1550 nm optical communication systems were fabricated by using laser welding technique, embodying in 30-pin butterfly package. For better coupling efficiency between switch chip and optical fiber, tapered fibers of 10~15mm lens radii were used, which provided up to 60% optical coupling efficiency. With the help of new laser hammering process, we could recover the lost optical power almost completely up to average 82% of initially obtained power. The fabricated optical switch modules showed good thermal stability of less than 5% degradation even after 200 times thermal cycling test. The 2.5 Gbps optical transmission characteristics of the 4$\times$4 switch module showed low sensitivities of less than -30dB for all possible switching paths. The transmission penalties of 1$\times$2 switch module at $10^{-10}$ BER were 0.6dB and 0.7dB for 50Xm and 90 Km optical fibers, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.467-473
• /
• 2013

The addition of disconnect switches to a distribution feeder or the replacement of the manual switches with the automatic switches do, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder and reducing the outage section. However, the improvement of reliability in power distribution system causes an increase of the investment cost, for example, replacement costs, labor costs, and so on. For this reason - the balance between investment and reliability improvement - many studies about the appropriate level of investment have been conducted. In this paper, we suggest the algorithm for determining the reasonable switch automation rate in the power distribution system. We evaluate the customer interruption cost and reliability for several cases - these cases relate with the switch automation rate - in the domestic metropolitan power distribution system, estimate the effectiveness of changing the manual switch to automatic switch quantitatively. These results can help the determining on the disconnect switch's automation rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.451-458
• /
• 2002

Absorptive type SP3T(Single Pole Three Throw) and SP8T switch modules over the 6-18 GHz are designed and fabricated. The epitaxial structure of GaAs PIN diode for switch modules are designed for low loss and high power capability. The maximum input power of SP3T and SP8T switch modules are 2 W and 1 W, respectively. The switching time with driver circuit is less than 130 nsec. The maximum insertion loss of SP3T switch module and SP8T module shows 2.8 dB and 4.2 dB, respectively. The isolation between input port and output port is more than 55 dB. Two switch modules for electronic warfare system have passed the environment tests of the related test items.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1003-1009
• /
• 2005

In this paper, small-size high-power single pole double throw(SPDT) switch with defected pound structure(DGS) is presented for wireless broadband internet application. To reduce the circuit size using slow-wave characteristic, the DGS is applied to ${\lambda}/4$ transmission line of the switch and the measured results are compared with them of conventional switch. To secure high degree of isolation, the switch with the DGS is composed of shunt-connected PIN diodes and shows insertion loss of 0.8 dB and isolation more than 50 dB at 2.3 GHz. The size of the switch is reduced about $50\%$ only with the DGS patterns while it has very similar performance to the conventional shunt-type switch.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.485-492
• /
• 2003

This paper presents a new modified input buffered switch, which called a grouped input buffered (GIB) switch, to eliminate the influence of HOL blocking when using multiple input buffers in ATM switches. The GIB switch consists of grouped sub switches per a network stage. The switch gives extra paths and buffered switching elements between groups for transferring the blocked cells. As the result, the proposed model can reduce the effect by the HOL blocking and thereafter it enhances the performance of the switch. The simulation results show that the proposed scheme has good performance in comparison with previous works by using the parameters such as throughput, cell loss, delay and system power.