• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2752-2761
• /
• 1993

The purpose of this study is to confirm the decreasing problems of residual bending strength, and the fracture machanism experimentally when CFRP composite laminates are subjected to Foreign Object Damage. Composite laminates used for this experiment are CFRP orthotropy laminated plates, which have two-interfaces [O/sub 6//sup o//90/sub 6//sup o/]sub sym/ and four-interfaces [O/sub 3//sup o//90/sub 6//sup o//O/sub 3//sup o]/sub sym/. When the specimen is subjected to transverse impact by a steel ball, the delamination area generated by impact damage is observed by using SAM(Scanning Acoustic Microscope). also, Thefracture surfaces obtained by three-point bending test were observed by using SEM (Scanning Electron Microscope). Then, fracture mechanism was investigated based on the observed delamination area and fracture surface. The results were summarized as follows; (1) It is found that for the specimen with more interface, the critical delamination energy is increased while delamination-development energy is decreased. (2) Residual bending strength of specimen A is greater than that of Specimen B within the impact range of impact energy 1. 65J (impacted-side compression) and 1. 45J (impacted-side tension). On the other hand, when the impact energy is beyond the above ranges, residual bending strength of specimen A is smaller than that of specimen B. (3) In specimen A and B, residual strength of CFRP plates subjected to impact damage is lower in the impacted-side compression than in the impacted-side tension. (4) In the case of impacted-side compression, fracture is propagated from the transverse crack generat-ed near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-B delamination in the case of impacted-side tension.

• 융합정보논문지
• /
• 제9권7호
• /
• pp.153-158
• /
• 2019

본 연구의 목적은 여자 배구선수와 탁구 선수 사이에 무릎 관절의 등속성 근력 수준을 비교하는 것이다. 총 27명의 엘리트 배구 선수와 27명의 탁구 선수가 이 연구에 참여하였다. 본 연구는 등속성 근력 측정을 통해 여자 배구선수 및 탁구 선수 무릎 굽힘근 근력과 폄근 근력의 양을 측정하였다. 최대 토크는 $60^{\circ}/s$에서 3회 최대 수의적 굽힘과 폄 수축을 수행하여 측정하였다. 여자 배구 선수는 여자 탁구선수 보다 무릎 폄과 굽힘근 근력이 높았다. 탁구 선수들은 왼쪽과 오른쪽 무릎 근력에 유의한 차이가 없었다. 하지만 배구 선수들은 양쪽 무릎 근력에 차이를 보였다. 또한, 신장과 체중은 무릎 근력과 양의 상관관계를 보였다. 본 연구를 통해 여자 배구 선수는 탁구 선수보다 무릎 근력이 더욱 높은 수준에 있음을 알 수 있었다. 또한 배구 선수가 비대칭적 무릎 근력이 있음을 발견하였다. 향후 연구에서는 등속성 근력강도에 대한 연구가 다른 스포츠 선수와 비교하여 확인될 것을 기대한다.

• 시큐리티연구
• /
• 제62호
• /
• pp.87-111
• /
• 2020

현재 국가주요시설 중 하나인 원자력발전소에서 근무하고 있는 특수경비원은 원자력시설 및 핵물질에 대한 위협으로부터 이를 안전하게 보호하기 위한 인적 방호의 역할을 수행하고 있다. 본 연구에서는 특수경비원의 임무완수에 필수적인 체력관리를 위한 체력훈련 프로그램을 개발하고자 하였다. 개발된 체력훈련 프로그램은 현재 근무 중인 특수경비원이 정호원, 최지웅(2019)이 제시한 원자력발전소 특수경비원 체력검정에 대비할 수 있도록 고안되었다. 연구진은 문헌분석, 연구진 회의, 전문가 회의 및 사전테스트를 진행하였으며, 이러한 과정을 거쳐 6주, 주 3회, 회 90분의 체력훈련 프로그램을 개발하였다. 한편 개발된 체력훈련 프로그램의 효과를 검증하기 위해 29명의 피험자(통제집단 15명, 운동집단 14명)를 대상으로 실험을 실시하였다. 구체적으로 운동집단을 대상으로 6주에 걸친 체력훈련 프로그램을 수행하였으며, 실험 전·후 피험자 전원을 대상으로 특수경비원 체력검정을 실시하였다. 실험 결과 개발된 체력훈련 프로그램의 수행이 특수경비원의 체력검정종목인 20m왕복오래달리기, 철봉에매달려무릎팔꿈치닿기, 20m중량왕복달리기, 메디슨볼뒤로던지기의 능력향상에 유의미한 효과가 있는 것으로 나타났다. 최근까지 특수한 환경 속에서 국민안전이라는 중대한 임무를 수행하고 있는 원자력발전소 특수경비원의 체력관리 및 감독 소홀에 대한 문제점들이 지적되고 있는 바, 본 연구가 제시한 체력관리 프로그램이 특수경비원들의 체력 유지·관리를 위한 실질적 대안이 되기를 기대한다.

• Journal of Welding and Joining
• /
• 제30권5호
• /
• pp.64-69
• /
• 2012

Sn-Bi eutectic alloy has been widely used as one of the key solder materials for step soldering at low temperature. The Sn-58Bi solder paste containing chloride flux was adopted to compare with that using the chloride-free flux. The paste was applied on the electroless nickel-immersion gold (ENIG) surface finish by stencil printing, and the reflow process was then performed at $170^{\circ}C$ for 10 min. After reflow, the solder joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 h in an oven. The interfacial microstructures were obtained by using scanning electron microscopy (SEM), and the composition of intermetallic compounds (IMCs) was analyzed using energy dispersive spectrometer (EDS). Two different IMC layers, consisting of $Ni_3Sn_4$ and relatively very thin Sn-Bi-Ni-Au were formed at the solder/surface finish interface, and their thickness increased with increasing aging time. The wettability of solder joints was investigated by wetting balance test. The mechanical property of each aging solder joint was evaluated by the ball shear test in accordance with JEDEC standard (JESD22-B117A). The results show that the highest shear force was measured when the aging time was 100 h, and the fracture mode changed from ductile fracture to brittle fracture with increasing aging time. On the other hand, the chloride flux in the solder paste did not affect the shear force and fracture mode of the solder joints.

• 한국표면공학회지
• /
• 제46권2호
• /
• pp.68-74
• /
• 2013

For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.

• 한국화재소방학회논문지
• /
• 제30권5호
• /
• pp.67-73
• /
• 2016

본 논문에서는 연소기에 사용되는 황동이음쇠형 CSST의 구조, 난연성 및 신뢰성 검증을 실시하였다. 황동이음쇠형 CSST는 보호 피막, 튜브, 너트, 클램프 링, 소켓, 볼 밸브 등으로 구성되어 있다. CSST의 적용 범위는 JIA가 4.2 kPa로 가장 높고, KS D 3625는 3.24 kPa이다. 정상 제품에 대한 신뢰 구간의 평균 저항은 $7.36m{\Omega}$으로 해석되었다. 난연성 실험이 완료된 후 신뢰 구간의 평균 저항은 $6.67m{\Omega}$이다. 정상 제품에 대한 AD는 1.584이며, 표준 편차는 0.3972로 해석되었다. 그리고 난연성 실험이 완료된 소손된 제품의 AD는 1.145이고, 표준 편차는 0.2467로 정상 제품에 비해 양호한 것으로 해석되었다. 또한 히스토그램 분석에서 정상 제품의 저항 평균은 $7.359m{\Omega}$이고, 표준 편차는 0.3972이었다. 그리고 난연성 실험이 완료된 후의 히스토그램의 저항 평균은 $6.67m{\Omega}$이며, 표준 편차는 0.2467이다.

• 대한물리치료과학회지
• /
• 제11권3호
• /
• pp.14-27
• /
• 2004

This study approaches the effects of Balance Training on excercise performance and the prevention from the injuries caused by excercise. The subjects of the Balance Training program are female exercise beginners and the research period covers 8 weeks from January 10 to March 7, 2003. The research objects are 19 female golf beginners in 30s to 40s, who live in Seoul or Seongnam in Gyeonggi province and have played golf less than 6 months. The programs of the Balance Training and exercise performance were conducted to an 11 experimental group among the 19 research objects at the same time, and only the exercise performance program was applied to an 8 control group for 8 weeks. Before and after 8 weeks' application of the research programs to each group, the research subjects were examined, especially the components of their bodies, the balance and the performance capability were measured both before and after the test. The frequency of injuries by exercise was measured after the test, and the difference of the frequency was compared with the frequency before exercise. First, the experimental group, in a measurement of balance, showed that SN, MB, SAr and SAg of static balance decreased in a situation of MEO, MEC, GEO, GEC, TBEO, TBO, FHEO, FEO(p <0.05), but the control group increased. Second, the analysis on the change of exercise performance indicated better improvement in distance, ball speed, and accuracy of the experimental group than the control group(p<0.05). Third, the experience of injuries showed that there were 2 injuries in the experimental group and 11 injuries in the control group. The injured parts were 2 cases in the hands and fingers of the experimental group, and 1 case in the shoulder, 4 in the elbows, 4 in the hands and fingers and 2 in the lumber of the control group. From the above-mentioned results, it is recognized that the Balance Training program improved the exercise performance of female golf beginners and had good effects on the prevention from injuries. Accordingly, if this program is applied to sports-beginners, it will contribute to the improvement of the public health.

• Tuberculosis and Respiratory Diseases
• /
• 제44권6호
• /
• pp.1308-1317
• /
• 1997

연구배경 : 폐국균종은 대부분 기존에 존재하는 공동성 폐병소에 이차적인 감염을 일으켜 주위조직의 침윤없이 집락을 형성하고 국소성장으로 균구을 보이는 질환으로 공동성 폐결핵환자의 약 15%에서 합병되는 것으로 알려져 있다. 지금까지의 국내보고는 주로 증례나 소수예에 대한 보고가 대부분이었기에 저자들은 대구 4개 대학병원에서 폐국균종으로 진단된 91예를 대상으로 임상적 특성을 알아보고자 하였다. 방 법 : 1986년 6월부터 1996년 5월까지 10년간 대구지역의 4개 대학병원에서 단순흉부촬영, 전산화단층촬영, 국균에 대한 혈청침강반응검사 및 생검을 통해 폐국균종으로 진단받은 91예를 대상으로 임상적 특성에 대한 후향적조사를 실시하였다. 총 91예중 10예(11.0%)는 임상적으로, 81예(89.0%)는 조직학적인 방법에 의하여 진단하였다. 결 과 : 1) 대상환자의 평균연령은 $45{\pm}12.04$세였고 연령 분포는 22세에서 65세까지였으며 남녀비는 남자 57예, 여자 34예로 1.7 : 1 이었다. 2) 증상은 객혈이 81예(89.0%)로 가장 흔했으며 기침, 호흡곤란, 무기력 체중감소, 발열, 흉통의 순이었다. 3) 기저질환은 폐결핵이 68예(74.7%), 기관지확장증 6예(6.6%), 공동성 종양 2예(2.2%), 폐 격리증 1예(1.1%)의 순이었으며, 14예(15.4%)는 원인 미상이었다. 4) 호발부위는 우상엽이 39예(42.9%), 좌상엽이 31예(34.1%)로 주로 상엽에 위치하였고 그밖에 좌하엽 13예(14.3%), 우하엽 7예(7.7%), 우중엽 1예(1.1%)의 빈도를 보였다. 5) 전체예중 단순흉부사진상에서는 57예(62.6%)에서, 전산화단층촬영을 같이 시행한 59 예중에서는 단순흉부사진에서 36예(61.0%)만이 발견되었으나, 전산화단층사진에서는 52예(88.1%)에서 전형적인 균구가 관찰되었다. 6) 대상환자 91예중 76예는 외과적 절제를 시행하였고, 공동내 항진균제 주입을 받은 4예를 포함한 15예에서는 내과적 치료를 받았다. 7) 수술적 절제방법은 폐엽절제 55예(72.4%), 폐구역절제 16예(21.1%), 전폐절제 4예(5.3%), 설절제 1예(1.3%)의 순이었으며, 수술에 따른 사망은 3예(3.9%)로 패혈증 2예와 객혈 1예였고, 술후합병증은 호흡부전, 출혈, 기관지흉막루, 농흉, 성대마비 각각 1예로 모두 6예(7.9%)였다. 8) 경과관찰이 가능했던 81예는 절제술후의 71예와 내과적 치료군의 10예였으며 각각 2예(2.7% vs 18.1%)씩의 재발성객혈을 보였다. 결 론 : 만성폐질환, 특히 폐결핵의 경과관찰중 단순흉부사진상에서 특징적인 균구의 소견이 관찰되지 않더라도 의심되는 환자에서는 추가적인 전산화단층촬영사진과, 또한 감별 및 임상적 진단을 위하여 혈청침강반응검사의 적극적인 활용이 필요하리라 생각된다. 그리고 외과적 절제술은 생명을 위협하는 대량객혈이나 반복성의 객혈에서 선택적으로 시행되어야 하며 공동내 항진균제 주입 등의 내과적 치료는 대조군과의 비교연구에 의한 재평가가 필요할 것으로 생각한다.