• 한국재료학회지
• /
• 제11권2호
• /
• pp.126-131
• /
• 2001

4 차 암모늄염을 형성할 수 있는 공중합체들 poly[(vinylbenzyl chloride)-co-(n-butyl acrylate)-co-(2-hydroxyethyl methacrylate)]와 poly[(4-vinylpyridine)-co-(n-butyl acrylate)-co-(2-hydroxyethyl methacrylate)]를 고분자막 습도센서의 감습재료로 사용하기 위하여 합성하였다. 습도센서는 30%RH, 60%RH 그리고 90%RH에서 평균 저항 값은 각각 8.6 M $\Omega$, 310 k$\Omega$ 그리고 12 k$\Omega$을 보여 주었다. 또한 히스테리시스는 $\pm$3%RH 안에서 나타났으며, 온도의존성 계수는 -0.37~-0.407RH/$^{\circ}C$이었다. 감습막의 조성에서 공중합체 중 n-BA와 HEMA의 도입은 저항을 증가시키는 요인이 되나 기판과의 접착성은 크게 향상되었다. 33%RH에서 85%RH로 또는 역으로 변화할 때의 응답속도는 54초이며 수중에 2시간 침적 후 저항의 변화는 +0.2%RH 이내에서 존재하였다.

• KSBB Journal
• /
• 제14권3호
• /
• pp.273-278
• /
• 1999

The molecularly imprinted polymers(MIPs) synthesized at various polymerization conditions were examined as ibuprofen receptors in terms of binding characteristics. The 4-vinylpyridine polymers had 1.2 times higher adsorption capability for (S)-(+)-ibuprofen than the methacrylic acid polymers. The methacrylic acid polymers synthesized by UV radiation had 1.9 times higher selectivity for (S)-(+)-ibuprofen compared to those by thermal initiation. Effects of various solvents for binding were also examined in this research. According to the Scatchard analysis, the (S)-(+)-ibuprofen artificial receptors had two different kinds of binding sites for (S)-(+)-ibuprofen while having only single kind of binding site for ketoprofen. The binding sites of (S)-(+)-ibuprofen, n were calculated as 4.3~4.9 $\mu$mol/g and the dissociation constants, $K_D$ were 0.68 mM for the specific binding.

• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.373-376
• /
• 1996

The bulk thermal and photopolymerization of methyl methacrylate(MMA) with phenylsilane were performed to produce poly(MMA)s containing phenylsilyl moiety presumably as an end group. It was found for both thermal and photopolymerization that while the polymerization yields and polymer molecular weights decreased as the relative phenylsilane concentration increases, the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increasing molar ratio of phenylsilane over MMA. The polymerization yield, molecular weight, and TGA residue yield for the thermal polymerization were higher than those for the photopolymerization. Thus, the phenylsilane seemed to significantly influence on the polymerization as both chain initiation and chain transfer agents. However, an appreciable silane effect was not observed on the thermal and photopolymerization of 4-vinylpyridine, acrylonitrile, styrene, and vinyltrimethoxysilane.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.61-61
• /
• 2008

Nanocomposites of metal (gold and silver) nanoparticles and multi-walled carbon nanotubes (MWNTs) were prepared with the assistance of various stabilizers for metals and MWNTs. Especially common surfactants such as poly(4-vinylpyridine) (PVP), sodium dodecyl sulfate (SDS), poly(sodium 4-styrene sulfonate) (PSS), and poly(diallyldimethylammonium) chloride (PDDA) were used for the sample preparation. Metal/MWNT nanocomposites were structurally characterized in by transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), UV/Vis spectroscopy. In addition, the electrical properties of the nanocomposites were studied by cyclic voltammetry (CV).

• Bulletin of the Korean Chemical Society
• /
• 제16권5호
• /
• pp.398-400
• /
• 1995

Selective oxidation of cyclohexane in acetone solution has been studied using iron catalysts with hydrogen peroxide in-situ produced by palladium catalyst. Iron tetraphenylporphyrin chloride shows the highest activity among the tested chlorides and porphyrin complexes of some metals of the first transiton series. Iron chloride and iron tetraphenylporphyrin chloride were supported on four kinds of 4-vinylpyridine copolymer with styrene or divinyl-benzene. Nitrogen 1s photoelectron spectra give the evidence that pyridyl nitrogens of the 4-vinyl pyridine copolymer act as ligands to bind iron species. The copolymer with styrene is the most efficient support for the binding because its solubility in catalyst preparation solvent (methylene chloride) gives the pyridyl group advantage to contact with the iron catalysts. However, better catalytic activity per iron atom could be obtained with a rigid crosslinked polymer due to active site isolation.

• 한국방사선학회논문지
• /
• 제15권2호
• /
• pp.229-238
• /
• 2021

본 논문에서는 고에너지 엑스선(6 MV X선)을 조사한 갑상선의 소포세포막 모델에서 막의 두께차이, 고정전달자[VP-AN% (w/ w)]의 농도차이, OH-이온의 농도차이가 세포내부와 세포외부사이로 갑상선호르몬의 구성성분인 요오드이온의 농도차이로 발생하고 갑상선호르몬의 생성량에 영향을 미치는데 이러한 영향을 구명하기위해서 소포의 세포막을 통한 요오드의 선택적 투과전달 특성에 대하여 연구하였다. 이 실험에 사용한 세포막 모델은 피리딘 양이온을 고정전달자로 한 poly(4-vinylpyridine- co-acrylonitrile :VP-AN)분말을 인장강도의 강화용인 polysulfone과 결합시킨 불균질의 복합막을 사용하였다. 고정전달자[VP-AN% (w/ w)]의 농도차이(0~62 %)에서 36.5 ℃로 방사선을 조사한 소포의 고분자 막(세포막모델)은 형태학적 변화인 인장강도가 비 조사된 세포막모델보다 약 1.2 ~ 1.8배 정도 감소되었다. 방사선을 조사한 갑상선의 소포세포막모델 [2mole AN%(w/w)]에서 막의 두께차이, 고정전달자[VP-AN% (w/ w)]의 농도차이, OH-이온의 농도 차이로 발생하는 요오드이온의 선택적 투과플럭스는 비 조사된 세포막모델보다 막의 두께가 변화 할 때 각각 약 2.1 ~ 4.5배, 약 2.2 ~ 2.5배, 약 2.1 ~ 2.67배 정도 감소되었다. 결국 방사선조사로 인해서 갑상선의 소포세포막에서 요오드이온의 선택적 투과 전달기능이 비정상적으로 되어 세포장해가 발생하고 갑상선호르몬의 생성량 감소도 동반하게 되었다고 사료됐다.

• Journal of Pharmaceutical Investigation
• /
• 제5권4호
• /
• pp.7-16
• /
• 1975

The drug release property from the coated tablets which contain 291mg of acetylsalicylic acid were estimated from comparison of the blood level and the urinary excretions after oral ingestion of coated tablets and noncoated tablet in human. The coating materials are 2-methyl-5-vinylpyridine-methylacrylic acid copolymer(MPM), dimethyl aminoethyl methacrylate methyl methacrylate copolymer(EE), polyvinyl acetal diethyl aminoacetate(AEA), and shellac. Each of 7 subjects ingested 873mg of acetylsaliylic acid. All tablets are coated approximately $3.5{\pm}0.5%(w/w)$ per tablet with each of the coating materials and met K.P.II. standard for potency and disintegration time. The availability was decreased in the following order:MPM coated tablets>EE coated tablets>AEA coated tablets>> shellac coated tablets.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.109-117
• /
• 2017

본 연구에서는 poly(N-vinyl carbazole) (PVK), poly(4-vinylpyridine) (PVP), PVK-b-PVP 블록 공중합체를 RAFT 중합법으로 합성하였으며, 이를 이용하여 ethanol, N-methyl-2-pyrrolidone (NMP), dichloromethane (DCM), tetrahydrofuran (THF)와 같은 비 수계 용매에서 그래핀 분산액을 제조하였다. 합성된 고분자의 화학적 구조는 양성자 및 탄소 핵자기 공명 분광기($^1H-$, $^{13}C-NMR$), 크기 배제 크로마토그래피 (size exclusive chromatography, SEC), 시차 주사 열량계 (differential scanning calorimetry, DSC)를 이용하여 분석하였으며, 그래핀 분산액의 분산 안정성은 Turbiscan을 이용하여 시간에 따른 터비스캔 안정성 지수(Turbiscan stability index, TSI)를 측정, 정량적으로 평가하였다. 용매, 고분자, 그래핀의 표면장력(${\sigma}$), 용해도 상수(${\delta}$)를 이용하여 물질간의 상호작용에 대하여 설명하였으며, 이를 바탕으로 용매와 그래핀간의 용해도와 표면장력의 차이가 분산안정성에 큰 영향을 미침을 확인하였다. 그래핀의 분산 안정성이 좋지 못한 ethanol 및 THF 용매 하에서 PVK-b-PVP를 사용하여 그래핀을 분산시킬 경우 낮은 TSI값을 효과적으로 유지할 수 있었으며, 그래핀을 잘 분산시킨다고 알려진 NMP에 비하여 DCM이 더 좋은 그래핀 분산안정성을 보임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2803-2808
• /
• 2014

High potential and fast electron transfer of a cathode mediator are significant factors for improving the performance of biofuel cells. This paper reports the first synthesis of a cathode redox polymer that is a coordination complex of poly (acrylic acid-vinylpyridine-acryl amide) (PAA-PVP-PAA) and [Os(4,4'-dicarboxylic acid-2,2'-bipyridine)$_2Cl_2]^{/+}$ ($E^{\circ}=0.48V$ versus Ag/AgCl). Bilirubin oxidase can be easily incorporated into this polymer matrix, which carried out the four-electron oxygen under typical physiological conditions (pH 7.2, 0.14 M NaCl, and $37^{\circ}C$). This new polymer showed an approximately 0.1 V higher redox potential than existing cathode mediators such as PAA-PVI-$[Os(dCl-bpy)_2Cl]^{+/2+}$. In addition, we suggest increasing the polymer solubility with two hydrophilic groups present in the polymer skeleton to further improve fast electron transfer within the active sites of the enzyme. The maximum power density achieved was 60% higher than that of PAA-PVI-$[Os(dCl-bpy)_2Cl]^{+/2+}$. Furthermore, high current density and electrode stability were confirmed for this osmium polymer, which makes it a promising candidate for high-efficiency biofuel cells.

• 분석과학
• /
• 제19권3호
• /
• pp.218-225
• /
• 2006

A molecularly imprinted polymer (MIP) was synthesized by radiation-induced polymerization (RIP), where the ferulic acid was used as a template molecule, 4-vinylpyridine as a monomer and ethylene glycoldimethacrylate (EGDMA) as a cross-linking monomer. The MIP was packed in a glass column using a slurry method for use in medium pressure liquid chromatography (MPLC). The MPLC column was tested for separation and purification of ferulic acid from the rice oil. When repeated three times, the MPLC separation/purification yielded the ferulic acid with the purity higher than ~99%. The chemiluminescence of the luminal (5-amino-2,3-dihydro-1,4-phtalazinedione) measured on a potato disc slide (5.0 mm thick) was enhanced in the presence of ferulic acid, while, without the ferulic acid, the chemiluminescence of luminol on the potato slice disc was not observed, which suggests the ferulic acid obtained from the rice oil can be useful for immunoassay.