• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.1
• /
• pp.21-29
• /
• 1993

The magnetic compass as a principal navigational instrument has been long used to fix ship's position and to determine ship's course. Particularly, in the small fishing vessels the studies on performance and rational usages for magnetic compass are requried to improve the safety and productivity of the small fishing vessels even though gyro compass is developed nowadays. For this purpose, the author examined the present condition of the magnetic compasses which are intalled on 219 small fishing vessels, and carried out a series of performance survey for each compass of them and also found the measured values of deviation by installation position of compass, respectively. The results obtained are summarized as follows: 1. The small fishing vessels less than 4 tons among the 219 small fishing vessels from 1 to 10 tons investigated were 50% of them. Only 1% of them were equipped with the deviation correctors, and 14 fishing vessels used the magnetic compasses which are more than 20 years old. 2. According to the compass installation position, the measured values of the deviation of the compass installed on the top bridge and the compass bed in bridge were ascertained to be the smallest, and those values of the compass installed on the bridge deck above engine room were larger and irregular. 3. The concomitant angle of the magnetic compasses installed on the experimented 4 fishing vessels were measured to be 6$^{\circ}$ to 16$^{\circ}$ and not accorded with the Korean standard values.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.15-21
• /
• 2002

This paper presents parallel operation of ZVT(Zero Voltage Transition) FUll Bridge Converter with Dynamic Current Shared Inductor. In the conventional method, CT(Current Transformer) have been used tn share the load current equally with converters. In this system, at parallel operation of ZVT Full Bridge Converter, dynamic current shared inductor divides the same current of unit converter and ZVT circuit aids to high efficiency. Superiority of the characteristics is verified through the experiment with a 2[㎾], 50[㎑] prototype converter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.7-14
• /
• 2005

Earlier researches have typically concentrated on discovering IP network topology, which implies that the connectivity of all Ethernet devices is ignored. But automatic discovery of Physical topology Plays a crucial role in enhancing the manageability of modem Metro Ethernet mesh networks due to the benefits of Ethernet services, including: Ease of use, Cost Effectiveness and flexibility. Because of proprietary solutions targeting specific product families and related algorithm which depends on Layer 2 forwarding table information it is impossible to discover physical topology in the Ethernet mesh networks. To cope with these shortcomings, in this paper we propose a novel and practical algorithmic solution that can discover accurate physical topology in the Ethernet mesh networks. Our algorithm divides the Ethernet mesh networks into bridged networks and host networks and those bridges located in boundary are named edge bridges. Our algorithm uses the standard spanning tree protocol MIB information for the bridged networks and uses the standard Layer 2 forwarding table MIB information for the host networks. As using the standard MIB information to discover physical topology we can offer interoperability guarantee in the Ethernet mesh networks composed of the various vendors' products.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1208-1217
• /
• 2019

The life-cycle prediction of the sub-module which is the unit system of MMC is very important from the viewpoint of maintenance and economic feasibility of HVDC system. However, the life-cycle prediction that considers only the type, number and combination of parts is a generalized result that does not take into account the operating condition of the sub-module, and may significantly differ from the life-cycle of the actual one. Therefore, we design a fault tree for the purpose of reflecting the operation characteristics of the full-bridge sub-module and apply the MIL-HDBK-217F to the failure rate of the basic event to predict the life-cycle of the full-bridge sub-module. It compares the life-cycle expectancy of the conventional failure rate analysis with the proposed fault-tree analysis and compares the lifetime according to whether the redundancy of the full-bridge sub-module is considered.

• Digital Contents
• /
• no.4 s.83
• /
• pp.52-55
• /
• 2000

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.203-206
• /
• 2007

연속 전자 모델과 결합된 종래의 분자 동역학 방법은 원자 사이의 힘과 원자의 전기용량에 의해 야기되는 탄소 나노튜브의 구부러지는 성질의 특성을 해석하였다. 탄소 원자의 전기 용량은 탄소 원자의 길이에 따라 변하였다. 본 연구는 11.567nm($L_{CNT}$)의 길이와 $0.9{\sim}1.5nm(H)$의 안쪽 깊이를 가진 (5,5) 탄소 나노튜브 브리지로 MD 시뮬레이션을 수행하였다. 탄소 나노튜브는 금 표면에 부딪힌 후 탄소 나노튜브 브리지는 약 ${\sim}1{\AA}$의 크기로 금 표면에서 진동하며, 크기는 차츰 감소하였다. $H{\leq}1.3nm$일 때, 탄소 나노튜브 브리지는 첫 번째 충돌 후에 금 표면과 계속 접촉해 있었고, $H{\leq}1.4nm$일 때, 탄소 나노튜브 브리지는 몇 번의 충돌 후에 금 표면과 안정한 접촉상태가 되었다. $H/L_{CNT}$가 0.13보다 작을 때, 탄소 나노튜브 초소형 전자기기 메모리는 반영구적인 비활성의 메모리 장치가 되는 반면에 $H/L_{CNT}$가 0.14보다 클 때 탄소 나노튜브 초소형 전자기기 메모리는 휘발성이거나 스위치 장치로 동작할 수 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.317-324
• /
• 2001

This paper proposes a SSSC based on 3-level half-bridge inverters. The dynamic characteristic of the proposed SSSC was analyzed by EMTP simulation and a scaled hardware model, assuming that the SSSC is inserted in the transmission line of the one-machine-infinite-but power system. The proposed SSC has six 3-level half-bridge inverters per phase, which operates in PWM mode. The proposed SSSC generates a quasi-sinusoidal output voltage by 90 degree phase shift to the line current. The proposed SSSC does not require the coupling transformer for voltage injection, and has a flexibility in operation voltage by increasing the number of series connection.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.7-13
• /
• 2001

In this paper, the external-exciting electronic ballast for an 100[W] high pressure sodium lamp using full-bridge inviter is designed. The L-C parallel full-bridge invert circuit for P-SPICE simulation is designed. The values of inductor and capacitor in the proposed equivalent L-C parallel resonant tank circuit are calculated theoretically. Then the ballast for high pressure sodium lamp is implemented using the simulated results. In the experimental results, that is confirmed which the results of implemented ballast are really same with the of simulated one.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.283-288
• /
• 2000

This paper proposes a novel Pulse Width Modulation (PWM) method for microprocessor implementation of full-bridge PWM inverters. In the method, the period of unipolar full-bridge inverters is divided equally into the frequency modulation ratio and the reference fundamental amplitude and the inverter output fundamental amplitude are compared. Using this method, the turn-on time computation of each interval is very favored for the microprocessor implementation. The harmonic analysis shows that the harmonics can be ignored when the modulation ratio is enough large. The simulation and experimental results show the effectiveness of the proposed algorithms.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1104-1105
• /
• 2007

본 논문은 고압방전램프용 안정기의 점화기 4종류를 ESR(Equivalent Series Resistance)를 고려하여 등가모델링 하였다. 전자식 안정기의 구동식에 따른 풀 브리지 방식의 점화기 2종류와 하프 브리지 방식의 1종류 마지막으로 자기식 안정기의 점화기를 모델링하고 타당성을 증명하기 위해 실험을 통하여 입증하였다.