A Design of External-Exciting Electronic Ballast for High Pressure Sodium Lamp Using Full-Bridge Inverter

풀브리지 인버터를 사용한 고압 나트륨램프용 타려식 전자식 안정기 설계

  • 이용후 (호서대학교 대학원 전기공학과) ;
  • 이진우 (호서대학교 전기정보통신공학부) ;
  • 최종문 (호서대학교 전기정보통신공학부)
  • Published : 2001.07.01

Abstract

In this paper, the external-exciting electronic ballast for an 100[W] high pressure sodium lamp using full-bridge inviter is designed. The L-C parallel full-bridge invert circuit for P-SPICE simulation is designed. The values of inductor and capacitor in the proposed equivalent L-C parallel resonant tank circuit are calculated theoretically. Then the ballast for high pressure sodium lamp is implemented using the simulated results. In the experimental results, that is confirmed which the results of implemented ballast are really same with the of simulated one.

본 논문에서는 풀브리지 인버터를 사용한 100[W] 고압 나트륨램프용 타려식 전자식 안정기를 설계하였다. L-C 병렬 풀브리지 회로에 대한 P-SPICE 시뮬레이션도 수행하였다 제안된 등가 L-C 병렬공진 탱크 회로에서의 인덕터와 커패시터의 값을 이론적으로 계산하였다. 그리고 계산 결과를 검증하기 위하여 설계에 따른 전자식 안정기를 제작하였다. 실측한 안정기의 제반 특성은 시뮬레이션 결과와 대단히 유사하였다.

Keywords

References

  1. IEEE A New High-frequency and High-Efficieney Electronic Ballast for HID Lamps : Topology, Analysis, Design and Experimental Results Richard Redl;Jon D.Paul
  2. 대한전기학회 논문집 전자식 안정기의 출력반도체 온도에 따른 주파수 가변회로 설계 최명호;임성훈;오선근;한병성
  3. 조명전기설비학회논문지· v.13 no.1 Lamp용 안정기의 종류 및 특징 박종연;정동열;조계현
  4. IEEE Production & Application of Light Committee A Comparison of Power Circuit Topologies an Control Technique for a High Frequency Ballast D.Tadesse;F.P.Dawson;S.B.Dewan
  5. 전력전자공학 노의철;정규범;최남선
  6. Linfinity Microelectronics Second-Generation Power Factor Controller Production Data Sheet
  7. IEEE Production & Application of Light Committee A Comparison of Resonant Inverter Topologies for HPS Lamp Ballasts R.M.Nelms;T.D.Jones;Melvin C.Cosby Jr.
  8. 회로이론 박송배
  9. 연구보고서 효율적 조명기술 개발 연구(Ⅱ) 한국동력자원연구소
  10. 조명·전기설비학회논문지 v.13 no.4 HID 램프용 전자식 안정기의 설계 이치환