• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.404-410
• /
• 2017

An analytical method for determination of propylene glycol alginate (PGA) in food products was developed by HPLC-size-exclusion chromatography. The GF-7M HQ column and LT-ELSD detector were determined by considering the instrumental analysis conditions for PGA analysis. The pretreatment method for the analysis of PGA was suitable for 3 hr extraction at $20^{\circ}C$ and 150 rpm according to the extraction temperature. Linearity ($R^2$) for the analysis of PGA was 0.9873 at calibration curve range of 300, 500, 700, 1,000, and 1,500 mg/kg (5 points). The limit of detection and limit of quantification of PGA on HPLC system was 171.43 and 519.50 mg/kg, respectively. The accuracy and coefficient of variation obtained by size-exclusion chromatography were 86.1~110.4% and 4.1~13.5%, respectively. By applying the HPLC-size-exclusion chromatography system, it was possible to analyze the contents of PGA in 134 different types of food products.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Solar Energy
• /
• v.17 no.4
• /
• pp.3-11
• /
• 1997

Because grain boundaries in polycrystalline silicon act as potential barriers and recombination centers for the photo-generated charge carriers, these defects degrade conversion effiency of solar cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatment, various grid pattern, selective wet etching for grain boundaries, buried contact metallization along grain boundaries, grid on metallic thin film. Pretreatment above $900^{\circ}C$ in $N_2$ atmosphere, gettering by $POCl_3$ and Al treatment for back surface field contributed to obtain a high quality poly-Si. To prevent carrier losses at the grain boundaries, we carried out surface treatment using Schimmel etchant. This etchant delineated grain boundaries of $10{\mu}m$ depth as well as surface texturing effect. A metal AI diffusion into grain boundaries on rear side reduced back surface recombination effects at grain boundaries. A combination of fine grid with finger spacing of 0.4mm and buried electrode along grain boundaries improved short circuit current density of solar cell. A ultra-thin Chromium layer of 20nm with transmittance of 80% reduced series resistance. This paper focused on the grain boundary effect for terrestrial applications of solar cells with low cost, large area, and high efficiency.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.421-427
• /
• 2003

A natural habit at bacterium, Enterobacter intermedious KH410 was isolated from freshwater plant root and identified. Adsorption of heavy metals such as lead, cadmium, and copper by this strain was examined. The minimal inhibitory concentrations(MIC) for each metal were 1.78 mM for lead, 0.17 mM for cadmium and 1.39 mM for lopper, respectively. Maximum production of dried cell was 2.56 g/$\ell$ in LB medium containing 0.5% NaCl, 1% yeast extract and 1% of lactose. Optimal conditions for adsorption were 0.6 dry g-biomass, at pH 4.0 and the temperature of $20^{\circ}C$. Adsorption equilibrium reached maximum after 30 min in 400 mg/$\ell$ metal solution. The adsorption capacity (K) of copper was 1.5 times higher than that of cadmium and lead was 1.1 times higher than that of cadmium. from the results obtained in this study, Freundlich adsorption model was applicable for all metals. Adsorption strength (1/n) of heavy metal ions were in the order of cadmium>copper>lead. The adsorption of dried cell for lead, cadmium, and copper was 56.2, 58.0, 55.8 mg/g-biomass, respectively. Pretreatment to increase ion strength was the most effective with 0.1 M NaOH whereas slight difference was found both KOH and $CaCl_2$ upon same concentration. Effective desorption was induced by 0.1 M EDTA for lead and 0.1 M $HNO_2$ for cadmium and copper.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1809-1816
• /
• 2000

The catalytic combustion of methanol as a model volatile organic compound(VOC) was been investigated over metal-phthalocyanine(PC) in a fixed bed flow reactor system. The catalytic activity of Co-PC pretreated with air and methanol mixture at $450^{\circ}C$ and 60 cc/min for 1 hr was very excellent. The order of catalytic activity on methanol combustion was summarized as follows: metal free-PC < Zn-PC < Fe-PC < Cu($\alpha$)-PC < Co-PC. By TG/DTA analysis, the tendency of thermal decomposition was increased as follows: metal free-PC < Zn-PC < Cu($\alpha$)-PC < Co-PC < Fe-PC. Under this pretreatment condition, the basic structures of Co-PC, Cu($\alpha$)-PC and Fe-PC were destroyed, and the new metal oxide such as $Co_3O_4$ from Co-PC was confirmed by EA and XRD analysis. But Zn-PC and metal free-PC were retained its basic structure under this pretreatment condition. On the combustion of methanol over Co-PC, HCHO and $HCOOCH_3$ were observed as an intermediate products in the high concentration of reactant or the short contact time(W/F).

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.4
• /
• pp.245-250
• /
• 1998

This research was carried out to investigate the effective methods of browning inhibition on Paeonia lactiflra Pall during hot air dehydratin. After drying for 36 hrs without pretreatment and with briquet fumigation moisture contents of Paeonia lactiflora Pall. was 16.0% and 16.2%, respectively, while with acidic solution, sulfite salt solution and blanching it was lower of 13.5, 12.9 and 14.8%, respectively. Using freeze drying moisture content was highest of 18.8%. The Hunter values of dried Paeonia lactiflora Pall., L, a, band ${\triangle} E$ showed that non-treatment had the most browning with 61.60, 1.89, 10.20 and 39.78, respectively, while briquet fumigation and sulfite salt solution were excellent in reducing browning. During freeze drying browning didn't occur. Paeoniflorin content was 2.41 and 2.51 %, respectively, in briquet fumigation and sulfite salt solution and was the highest (2.70%) in freeze drying. The content of $SO_2$, was 0.63% both in briquet fumigation and sulfite salts. It was 0.15% and 0.17% higher than nontreatment and freeze drying. The most effective pretreatment to inhibit browning of Paeonia lactiflora Pall. was soaking in sulfite salt solution $(0.5% NaHSO_4-0.5% Na_2S_2O_3)$ considering many things such as manpower, economical efficiency, drying time, commodity, etc. but safety should be evaluated to treat sulfite salts solution on peony roots.

• Korean Journal of Veterinary Research
• /
• v.29 no.2
• /
• pp.123-128
• /
• 1989

Demi-embryos were successfully produced by bisection of ICR mouse embryos at preimplantation stages. They were microsurgically bisected using a microsurgical blade attached to a micromanipulator after pretreatment with 0.5% pronase in PBS for two minutes or not. Embryos with softened zona pellucida were more easily bisected and less damaged than intact embryos. The highest success rate in bisection has been achieved by selecting blastocysts(94.1% in success rate with intact blastocysts and 100% in success rate with zona softened blastocysts). Demi-embryos without zona pellucida were cultured in D-PBS or M-16 medium at $37^{\circ}C$, 5% $CO_2$ in air for 72 hours for 2-cell stage embryos, 48 hours for 4-to 8-cell stage embryos, 24 hours for morula stage embryos and 6~12 hours for blastocyst stage embryos. For the in vitro culture of 2-cell stage embryos, $100{\mu}M$ 2Na-EDTA was added to the media. M-16 medium was better for the in vitro development of mouse embryos than PBS, and PBS is not considered to be suitable for long-term culture of embryos, especially at early stage of cleavage. In M-16 medium, developing rate of demi-embryos of which pair underwent development to form eublastocysts was 15.8% at 2-cell stage, 16.8% at 4-cell stage, 38% at 8-cell stage, 89.6% at morula stage and 94.4% at blastocyst stage, respectively. The more rapid and efficient production of demi-embryos and higher viability after bisection can be expected by softening zona pellucida with pronase and by selecting morulae or blastocysts rather than embryos at early stage of cleavage.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.132-136
• /
• 1995

This study was carried out to elucidate the effective of some swelling agents on the soaking treatment of raw silk. The swelling of raw silk is commonly practiced by soaking in warm water, However, it is not enough to weaving of raw silk. Therefore, the combination of some chemical agents were tested to improve the swelling ratio of raw silk. The pretreatment of raw silk in 0.4N sodium carbonate aqueous solution before soaking in the mixed solution of Emulon 1 g/l, Emanol 0.5 g/l and 0.04N sodium silicate increased the swelling ratio by 57%, compared to the nontreatment. In SEM observation, the surface of raw silk soaked in swelling agents was swollen and smoothed.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.429-438
• /
• 2010

In this study, effect of carbon source on the hydrolytic ability of the enzyme from Fomitopsis pinicola, a brown rot fungi, for lignocellulosic biomass were examined on two lignocellulosic biomasses (rice straw and wood) without any pretreatment. Cellulase activities of crude enzyme from F. pinicola, which was cultured on softwood mixture as a carbon source, were 19.10 U/$m{\ell}$ for endo-${\beta}$-1,4-gulcanase (EG), 36.1 U/$m{\ell}$ for ${\beta}$-glucosidase (BGL), 7.27 U/$m{\ell}$ for cellobiohydrolase (CBH), and 7.12 U/$m{\ell}$ for ${\beta}$-1,4 xylosidase (BXL). Softwood mixture as a carbon source in F. pinicola comparatively enhanced cellulase activities than rice straw. The optimal pH and temperature of the cellulase was identified to pH 5 and $50^{\circ}C$for the hydrolysis of rice straw. Under these condition rice straw was hydrolyzed to glucose by the cellulase up to $32.0{\pm}3.1%$ based on the glucan amount of the rice straw for 72 h, while the hydrolytic capability of commercial enzyme (Celluclast 1.5${\ell}$) from rice straw to glucose was estimated to $53.7{\pm}4.7%$ at the same experimental condition. In case of addition of Tween 20 (0.1% w/w, substrate) to the cellulase the hydrolysis of rice straw to glucose was enhanced to $38.1{\pm}2.0%$.

• Journal of Chest Surgery
• /
• v.41 no.5
• /
• pp.541-549
• /
• 2008

Background: Vasoconstrictor-induced reduction in arterial graft diameter can cause significant flow deprivation. The aim of this study was to evaluate the effect of vasodilator pretreatment on vasoconstrictor-induced blood vessel spasm in vitro. Material and Method: Rabbit brachial arteries (BA) and celiac arteries (CA) were cut into rings $(3{\sim}4mm)$ and suspended with a force displacement transducer (TSD $125C^{(R)}$, Biopac Inc. USA) in a tissue bath filled with 5 mL modified Krebs solution bubbled with 5% $CO_2$ and 95% $O_2\;at\;38^{\circ}C$. The rings were contracted with vasoconstrictors, and the developed tension changes were considered control values. The rings were then pre- treated with $30{\mu}M$ nitroglycerin, nicardipine, verapamil, and papaverine, respectively, for 40 minutes and rinsed with the physiologic buffered salt solution three times every 15 min. The vasoconstrictor-induced tension changes after the previous procedure were considered experimental values. Data are expressed as the percentage tension induced by vasoconstrictors before and after pretreatment with vasodilators. Result: Nicardipine depressed vasoconstriction induced by norepinephrine, angiotensin II (All), and U46619 in both the BA and the CA more significantly than did nitroglycerin (p<0.01) and verapamil (p<0.05). Verapamil depressed vasoconstriction induced by 5-hydroxytryptamine (5HT), All, and U46619 in the BA and by 5HT in the CA more significantly than did nitroglycerin (p<0.01). Conclusion: These findings suggest that both nicardipine and verapamil effectively depressed vasoconstrictor action. Nicardipine is thought to be more effective than verapamil for the prevention of vasoconstrictor action.