• 한국주거학회논문집
• /
• 제17권5호
• /
• pp.87-95
• /
• 2006

Building components have been deteriorated by various factors such as location, a building type, a surrounding environment and so on. In addition, each component has a peculiar characteristics, compared with other components in properties of matter an used part. Building components would be required to maintain its function and performance to provide the resident with a decent living condition. It is important to decide the repair time, scope and a required cost in repair plan, considering the each component's characteristics. In this parer, it aimed at providing the economic repair pattern to analyze the relation of the time-elapse and the cumulative repair cost in the apartment housing using 3rd quadratic function. Results of the study are as follows: First, the shape of the function for the economic repair is classified into two type. One is the continuous increase type of the cumulative cost which properly means the iterative repair type after built. The other is that the function has the maximum state at a point which means one-repair after its repair would be delayed to a scheduled time. Second, the iterative repair pattern would include window, roof proof, lighting and water supply pipe. The other repair pattern would include the paintings, heating pipe and sign board.

• 한국학교수학회논문집
• /
• 제2권1호
• /
• pp.93-104
• /
• 1999

The subject of this study was the graph of relation of direct inverse proportion, linear function and quadratic function in the 1st, 2nd and 3rd grade of current middle school mathematics curriculum. GSP materials were developed to simplify the principle, trait and characteristics of graphs and make them easier to understand. The overall aim of the materials is to improve the effectiveness of teaching and learning through the utilization of enhanced students' practice. Additionally, the use of the GSP will be useful in the development of mere effective materials. The effectiveness of the GSP materials will be as followings. 1. The step by step approach of GSP materials through computer interaction will enhance students motivation and interest in mathematics. 2. By presenting the subject matter simply and in a variety of ways, difficult concepts can be understood without the use of complex mathematical calculation. 3. The GSP program is different from CAI and other software programs. It should be used only after learning how to input and output data.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.89-99
• /
• 2002

The multifamily housing has various advantages in construction cost, land-use intensity. KRIHS(1997) recommended the proper scale of th multifamily housing as 800 households in constructability, 1,000 households in facility compactability, 500 households in social aspect. At the early planning stage of project, the size of the multiftmily housing has, until now, been maximizingly considered under the regulation on which has been emphasized at the building volume ratio, land area, etc., except for the expenditure during the maintenance stage. This paper aimed at providing the proper size of multifamily housing in aspect of area and household number with maintenance cost at the early stage of project. For these, it took 곧 average cost function which is made from the 3-rd quardratic form and analyzes the unit increasing rate of the average cost. It surveyed in nationwide focused on the central heating system using diesel and kerosene. The number of samples is 88 and items of management cost is 11. The results are as follows ; first, 3rd-order quadratic function is proper at explaining the cost variation, considering the multicollinearity and statistics. Second, the proper size of multifamily housing is recommended with 83,000 $m^2$ on management area, 820 or over the 2,630 household number in aspect of total management cost.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.385-396
• /
• 1989

본 논문에서는 차륜과 레일의 접촉부에서 발생하는 크리프힘과 크리프모멘트 를 결합시키고 이들이 병진스프링과 비틀림스프핑에 의해서 연성되었을때 생기는 고유진동수의 특성을 차륜과 레일의 직교성을 이용하여 수치해석하고 모델실험을 통하여 연구하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권5호
• /
• pp.563-566
• /
• 2010

Using an open-circuit system, we compared the methane ($CH_4$) emission from dry cows fed first-cut Timothy silage ($1^{st}$ TY), second-cut Timothy silage ($2^{nd}$ TY), second-cut Italian ryegrass silage ($2^{nd}$ IR), third-cut Italian ryegrass silage ($3^{rd}$ IR), or second-cut red clover silage ($2^{nd}$ RC) as the sole feed. The methane emission ranged from 258.2 L $day^{-1}$ to 396.5 L $day^{-1}$. The methane emission from dry cows fed red clover silage was relatively lower than that from dry cows fed grass silage. However, the methane emission per unit digestible neutral detergent fiber (NDF) intake (dNDFI) did not differ significantly between the experimental silages. The methane emission was significantly correlated with the NDF intake and digestibility. Methane emission had a significant correlation with the quadratic function of dNDFI. The differences in the daily volume of methane emission from cows fed different forages can be explained by dNDFI.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.608-616
• /
• 2018

일반적으로 비선형 시스템은 1차와 2차 시스템의 곱의 형태로 선형화되며, 시스템의 근은 1차 시스템의 근과 2차 시스템의 중근, 서로 다른 두 실근, 복소근으로 구성된다. 그리고 LQ(Linear Quadratic) 제어는 성능지수함수를 최소화하는 제어법칙을 설계하는 방법으로 시스템의 안정성을 보장하는 장점과 가중행렬 조정으로 시스템의 근의 위치를 조정하는 극배치 기능이 있다. 가중행렬에 의해 LQ 제어는 시스템의 근의 위치를 임의로 이동시킬 수 있지만 시행착오 방법으로 가중행렬을 설정하는 어려움이 있다. 이것은 해밀토니안(Hamiltonian) 시스템의 특성방정식을 이용하여 해결 할 수 있다. 또한 제어가중행렬이 상수의 대칭행렬이면 제어법칙을 반복적으로 적용하여 시스템의 여러 근을 원하는 폐루프 근으로 이동시킬 수 있다. 이 논문은 해밀토니안 시스템의 특성방정식을 이용하여 조단 블록을 갖는 시스템의 중근을 두 실근으로 이동시키는 상태가중행렬과 제어법칙을 계산하는 방법을 제시한다. 삼각함수로 표현된 상태가중행렬로 해밀토니안 시스템의 특성방정식을 구한다. 그리고 이동된 두 실근이 특성방정식의 근이라는 조건에서 중근과 상태가중행렬의 관계식(${\rho},\;{\theta}$)을 유도한다. 상태가중행렬이 양의 반한정행렬이 될 조건에서 중근의 이동범위를 구한다. 그리하여 이동범위에서 선택한 두 실근을 관계식에 대입하여 상태가중행렬과 제어법칙을 계산한다. 제안한 방법을 간단한 3차 시스템의 예제에 적용해본다.

• 한국주거학회논문집
• /
• 제16권5호
• /
• pp.67-74
• /
• 2005

The performance of building should be deteriorated with time while the building would maintain and manage the function and performance to get a living condition. For the efficient maintenance of the building, the repair cycle would be provided and applied during the service-life time. The service-life time of the building components would be needed to determine the repair time and the repair scope. The service-life time of the building components would be calculated with the 1st repair time and the recovery rate of the performance, considering the recovery rate after repaired. In this paper, the 1st repair time would be estimated with the normal probability distribution, choice probability and 3rd quadratic function. The recovery rate of the building components assumes various level according to the research target and utility area. The results of this study are as follows ; first, most of the components of the building work would range about 30 years in the service-life time and the components of the mechanical works range from 28 years to 37 years, those of the electrical works would be about 31 years.

• 한국지진공학회논문집
• /
• 제9권3호
• /
• pp.33-42
• /
• 2005

비선형 함수로 모델링되는 동적 시스템의 비선형 파라미터를 결정하기 위하여 주파수 영역 볼테라 모델을 적용하는 연구를 수행하였다. 시간영역의 1차, 2차, 3차 전달함수에 해당하는 주파수 영역의 볼테라 핵함수를 비선형 파라미터 산정 과정에 3차 비선형 항까지 포함시켰다. Schetzen의 방법으로 시스템의 비선형 미분방정식에 적합한 볼테라 급수 표현식을 정하고, 이로부터 유도되는 비선형 전달함수를 입력 출력 관계식에 사용하였다. 관찰된 입력을 비선형 주파수 영역 모델에 대입하여 계산한 출력과 관찰된 출력의 차이로 오차를 정의한 후 오차를 최소화 시키는 시스템 파라미터의 값을 구하였다. 예제를 통하여 선형 주파수 구간 뿐만 아니라 2차 혹은 3차 비선형이 지배적인 주파수 범위 대에서 볼테라 모델이 충분한 정확성과 수렴성을 가지며 인식된 파라미터는 실제 값과 잘 일치함을 확인할 수 있었다.