• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2427-2432
• /
• 2009

This paper proposes an monitoring system of elder and feeble person's motion activity using an object's motion activity data. The proposed system used wireless 3-axis sensor module, product by Freescale(Wireless Sensing Triple Axis Reference Design Board (ZSTAR)). We distribute sensing data into three classes using Neural Network System SVM. We find performance of proposed system that simulate some case about walk, past walk, fallen. Classify result data and graph of sensing data present succes rate 80%.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.500-503
• /
• 2011

본 연구에서는 Terrestrial Laser Scanning (TLS)를 이용한 보 구조물의 변위 및 응력 추정에 대한 기법을 개발하였다. TLS는 Geographic Informatio Systems (GIS) 분야에서 처음 도입된 시스템으로, 레이저 펄스를 통해 원격으로 목적물의 3차원 좌표 정보를 획득 할 수 있는 시스템이다. 그러나 이러한 TLS로부터 획득한 대상물의 3차원 좌표 데이터는 10mm 내외의 오차를 포함하고 있다. 이에 건축 구조분야에 적용 가능한 변형 정보를 획득하기 위해서는 보다 정밀한 데이터 획득을 위한 데이터 처리 기법이 필요하다. 또한 구조물의 응력의 경우 획득된 형상 위의 각 지점의 곡률로 인해 발생하기 때문에 구조물의 변형 추정시 보다 미세한 오차에도 크게 영향을 받아 심한 왜곡을 가져오게 된다. 그러므로 응력 추정시 추가적인 데이터 처리 기법이 필요하다. 이에 본 연구에서는 보 구조물의 응력을 추정할 수 있는 기법을 제시한다.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.128-133
• /
• 2006

This paper describes a high speed interface circuit using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit that serial binary data are received and converted into parallel redundant multi-valued data, and decoding circuit that converts redundant multi-valued data to parallel binary data. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, the proposed 1:4 DEMUX (demultiplexer, serial-parallel converter), was designed using a 0.35um standard CMOS technology. Proposed DEMUX is achieved an operating speed of 4.5Gb/s with a supply voltage of 3.3V and with power consumption of 53mW. The operating speed of this circuit is limited by the maximum frequency which the 0.35um process has. Therefore, this circuit is to achieve CMOS communication ICs with an operating speed greater than 10Gb/s in submicron process of high operating frequency.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.207-214
• /
• 2004

The Qis visualizational spreadsheet environment is shown to be extremely effective in supporting the visualization of multi-gigabyte multi-dimensional data sets. The Qis has a novel framestack that is the 3-D arrangement of spreadsheet elements. It enables the visualization spreadsheet to effectively manage, rapidly organize, and compactly encapsulate multi-dimensional data sets for visualization. Using several experiments with scientific users, the Qis has been demonstrated to be a highly interactive visual browsing tool for the analysis o( multidimensional data, displaying 2-D 3-D graphics, and rendering in each frame of the spreadsheet.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.693-697
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication, but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$ delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s$, $130{\mu}s$, $200{\mu}s$ delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s$, $160{\mu}s$, $250{\mu}s$ delay time at 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the German PACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1852-1857
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$, delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s\;130{\mu}s\;200{\mu}s$, delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s\;160{\mu}s\;250{\mu}s$ 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the emu FACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.25 no.3
• /
• pp.165-189
• /
• 2014

This study examined the current practices of Research Data Management (RDM) services recently built and implemented at research university libraries in the U.S. by analyzing the components of the services and the contents presented in their web sites. The study then analyzed the content of web pages describing the services provided by 31 Research Universities/Very High research activity determined based on the Carnegie Classification. The analysis was based on 9 components of the services suggested by previous studies, including (1) DMP support; (2) File organization; (3) Data description; (4) Data storage; (5) Data sharing and access; (6) Data preservation; (7) Data citation; (8) Data management training; (9) Intellectual property of data. As a result, the vast majority of the universities offered the service of DMP support. More than half of the universities provided the services for describing and preserving data, as well as data management training. Specifically, RDM services focused on offering the guidance to disciplinary metadata and repositories of relevance, or training via individual consulting services. More research and discussion is necessary to better understand an intra- or inter-institutional collaboration for implementing the services and knowledge and competency of librarians in charge of the services.

• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2005

This paper describes the main characteristics of Grid Services based on OGSA and a Grid service for aggregating service data element(SDE)s. In order to build a Grid Service, it needs to consider a systematic building approach from the high-level software architecture that represents the main system components and their interactions. The purpose of this paper is to design and implement an extended service data aggregator service in which SDE is a basic unit for collecting resource information. A GT3 based service data aggregator service is extended to apply the multiple collections based storage scheme for maintaining persistently SDEs with a XML DBMS Xindice. To provide efficient aggregating service for service data elements, which is running under wide area environment like Internet, the aggregator service is asynchronously operated by notification mechanism.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.111-112
• /
• 2009

최근 IT 분야의 키워드 중 하나인 클라우드 컴퓨팅에서, 분산 파일 시스템의 선택은 대용량의 데이터를 관리하기 위해 매우 중요하다. 오픈소스 분산 파일 시스템 중 하나인 HDFS는 데이터의 효율적인 저장과 검색의 장점을 통해 최근 널리 사용되고 있다. HDFS는 데이터를 3단계 중복저장을 통해 신뢰성을 보장한다. 그러나 이러한 중복저장은 데이터 저장의 효율성 저하의 문제점을 갖고 있다. 따라서 본 논문에서는 MD5 해쉬 기술을 적용한 중복 데이터 제거 기법을 제안한다. 본 기법은 시뮬레이션을 통해 저장 공간의 효율성을 향상의 결과를 확인하였다.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.30 no.2
• /
• pp.71-90
• /
• 2021

The virtual patient dataset is a collection of diagnostic data from various sources acquired from a single patient into a coordinate system of three-dimensional visualization. Virtual patient dataset makes it possible to establish a treatment plan, simulate various treatment procedures, and create a treatment planning delivery device. Clinicians can design and simulate a patient's smile on the virtual patient dataset and select the optimal result from the diagnostic process. The selected treatment plan can be delivered identically to the patient using manufacturing techniques such as 3D printing, milling, and injection molding. The delivery of this treatment plan can be linked to the final prosthesis through mockup confirmation through provisional restoration fabrication and delivery in the patient's mouth. In this way, if the diagnostic data superimposition and processing accuracy during the manufacturing process are guaranteed, 3D digital smile design simulated in 3D visualization can be accurately delivered to the real patient. As a clinical application method of the virtual patient dataset, we suggest a decision-making method that can exclude occlusal adjustment treatment from the treatment plan through the digital occlusal pressure analysis. A comparative analysis of whole-body scans before and after temporomandibular joint treatment was suggested for adolescent idiopathic scoliosis patients with temporomandibular joint disease. Occlusal plane and smile aesthetic analysis based on the virtual patient dataset was presented when treating patients with complete dentures.