• Kyungpook Mathematical Journal
• /
• 제50권4호
• /
• pp.537-543
• /
• 2010

Let X be a regular $T_1$-space such that each single point set is a $G_{\delta}$ set. Denot 'hereditarily closure-preserving' by 'HCP'. To consider a question of closed maps of S. Lin in [6], we improve some results of Foged in [1], and prove the following propositions. Proposition 1. $D\;=\;\{x{\in}X\;:\;\mid\{F{\in}\cal{F}:x{\in}F\}\mid{\geq}{\aleph}_0\}$ is discrete and closed if $\cal{F}$ is a collection of HCP. Proposition 2. $\cal{H}\;=\;\{{\cup}\cal{F}'\;:\;F'$ is an fininte subcolletion of $\cal{F}_n\}$ is HCP if $\cal{F}$ is a collection of HCP. Proposition 3. Let (X,$\tau$) have a $\sigma$-HCP k-network. Then (X,$\tau$) has a $\sigma$-HCP k-network F = ${\cup}_n\cal{F}_n$ such that such tat: (i) $\cal{F}_n\;\subset\;\cal{F}_{n+1}$, (ii) $D_n\;=\;\{x{\in}X\;:\;\mid\{F{\in}\cal{F}_n\;:\;x{\in}F\}\mid\;{\geq}\;{\aleph}_0\}$ is a discrete closed set and (iii) each $\cal{F}_n$ is closed to finite intersections.

• 센서학회지
• /
• 제31권4호
• /
• pp.255-259
• /
• 2022

In this study, we fabricated ZnS substrates with excellent transmittance in the mid-infrared region (3-5 ㎛) using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon (DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance efficiency. To reduce the reflectance and further improve transmittance in the mid-infrared region, anti-reflection (AR) coating was designed for DLC/ZnS /AR and AR/ ZnS /AR structures. The coating structure, microstructure, and optical properties of the AR-coated ZnS substrates were subsequently investigated by employing energy dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared (FTIR) spectroscopy. The FTIR spectroscopy results demonstrated that, in the mid-infrared region, the average transmittance of the samples with AR coating on one and both sides increased by approximately 18% and 27%, respectively. Thus, AR coating improved the transmittance of the ZnS substrates.

• 한국광물학회지
• /
• 제31권4호
• /
• pp.235-248
• /
• 2018

본 연구는 제올라이트 Y (Si/Al = 1.56)에서 $Cs^+$ 이온 교환에 $Ca^{2+}$ 이온의 경쟁 양이온 효과를 연구하기 위해 수행되었다. 완전히 탈수되고 부분적으로 $Cs^+$ 이온으로 교환된 3개의 제올라이트 Y(Si/Al = 1.56)의 단결정은 혼합이온교환 용액을 사용하여 흐름법으로 제조되었으며, 전체 농도가 0.05 M인 이온교환용액의 $CsNO_3:Ca(NO_3)_2$ 몰비는 1 : 1 (Crystal 1), 1 : 100 (Crystal 2) 및 1 : 250 (Crystal 3)이다. 이온교환된 단결정을 723 K에서 2일 동안 $1{\times}10^{-4}Pa$로 진공 탈수시켰으며, 결정구조는 100(1) K에서 입방공간군 $Fd{\bar{3}}m$을 사용하여 단결정 싱크트론 X선 회절법으로 해석하고 구조를 정밀화하였다. Crystal 1, 2 및 3의 단위세포당 화학식은 ${\mid}Cs_{21}Ca_{27}{\mid}[Si_{117}Al_{75}O_{384}]-FAU$, ${\mid}Cs_2Ca_{36.5}{\mid}[Si_{117}Al_{75}O_{384}]-FAU$ 및 ${\mid}Cs_1Ca_{37}{\mid}[Si_{117}Al_{75}O_{384}]-FAU$이다. 3개의 결정 모두에서, $Ca^{2+}$ 이온은 D6Rs 내의 site I을 우선적으로 점유하고 있으며 나머지는 site I', II' 및 II를 점유하고 있다. 한편 주어진 이온교환용액의 초기 $Cs^+$ 이온의 농도에 따라 $Cs^+$ 이온의 분포에 중요한 차이가 관찰되었다. Crystal 1에서는 $Cs^+$ 이온이 site II', II, III와 III'에 위치하고 있으며, Crystal 2에서는 site II, IIIa, IIIb에 위치하고 있다. Crystal 3에서는 $Cs^+$ 이온은 site IIIa 및 IIIb에만 위치하고 있다. 초기 $Ca^{2+}$ 이온의 농도가 증가하고 $Cs^+$ 이온의 농도가 감소에 따라 $Cs^+$ 이온의 교환정도는 28.0에서 2.7과 1.3 %로 급격히 감소하였다.

• Structural Engineering and Mechanics
• /
• 제45권3호
• /
• pp.311-321
• /
• 2013

In this study, to have a better judgment on the structural performance, the effects of dynamic Soil-Structure Interaction (SSI) on seismic behaviour and lateral structural response of mid-rise moment resisting building frames are studied using Finite Difference Method. Three types of mid-rise structures, including 5, 10, and 15 storey buildings are selected in conjunction with three soil types with the shear wave velocities less than 600m/s, representing soil classes $C_e$, $D_e$ and $E_e$, according to Australian Standard AS 1170.4. The above mentioned frames have been analysed under two different boundary conditions: (i) fixed-base (no soil-structure interaction), and (ii) flexible-base (considering soil-structure interaction). The results of the analyses in terms of structural lateral displacements and drifts for the above mentioned boundary conditions have been compared and discussed. It is concluded that the dynamic soil-structure interaction plays a considerable role in seismic behaviour of mid-rise building frames including substantial increase in the lateral deflections and inter-storey drifts and changing the performance level of the structures from life safe to near collapse or total collapse. Thus, considering soil-structure interaction effects in the seismic design of mid-rise moment resisting building frames, particularly when resting on soft soil deposit, is essential.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.741-749
• /
• 2003

광섬유의 색 분산과 자기 위상 변조 외에 상호 위상 변조 효과에 의해 왜곡된 WDM 채널 신호가 MSSI (Mid-Span Spectral Inversion) 기법을 통해 보상되는 정도를 다양한 광섬유 분산 계수를 고려하여 분석해 보았다. 본 연구에서 고려된 시스템은 120 Gbps (3$\times$40 Gbps) 강도 변조 직접 검파 방식의 WDM 시스템이다. 또한 전체 전송로의 중간에 비선형 매질로 HNL-DSF(Highly nonlinear dispersion shifted fiber)를 갖는 광 위상 공액기를 두고, 광 위상 공액기를 중심으로 첫 번째 전송 구간에서의 평균 강도와 두 번째 전송 구간에서의 평균 강도를 같게 하는 PAIA(Path Averaged Intensity Approximation) 방식 의 MSSI 기법을 채택한 시스템이다. 채널별 보상 특성의 분석은 1 dB 기준 눈 열림 패널티(Eye Opening Penalty)를 이용했다. 색 분산과 비선형 효과에 의한 채널 신호 왜곡이 유도될 수 있는 장거리 WDM 시스템에 MSSI 기법을 적용하면 전송 거리와 전송 품질을 단일 채널 전송 이상으로 개선시킬 수 있고, 상호 위상 변조에 의한 왜곡의 보상 측면에서 MSSI 기법은 광섬유의 분산 계수가 비교적 큰 WDM 시스템에 더욱 유효하다는 것을 확인할 수 있었다.

• Korean Journal of Radiology
• /
• 제23권4호
• /
• pp.455-465
• /
• 2022

Objective: To compare the reproducibility and performance of quantitative metrics between ZOOMit and conventional intravoxel incoherent motion (IVIM) magnetic resonance imaging (MRI) in the diagnosis of early- and mid-stage Sjögren's syndrome (SS). Materials and Methods: Twenty-two patients (mean age ± standard deviation, 52.0 ± 10.8 years; male:female, 2:20) with early- or mid-stage SS and 20 healthy controls (46.9 ± 14.6 years; male:female, 7:13) were prospectively enrolled in our study. ZOOMit IVIM and conventional IVIM MRI were performed simultaneously in all individuals using a 3T scanner. Quantitative IVIM parameters - including tissue diffusivity (D), pseudodiffusion coefficient (D^*), and perfusion fraction (f) - inter- and intra-observer reproducibility in measuring these parameters, and their ability to distinguish patients with SS from healthy individuals were assessed and compared between ZOOMit IVIM and conventional IVIM methods, appropriately. MR gland nodular grade (MRG) was also examined. Results: Inter- and intra-observer reproducibility was better with ZOOMit imaging than with conventional IVIM imaging (ZOOMit vs. conventional, intraclass correlation coefficient of 0.897-0.941 vs. 0.667-0.782 for inter-observer reproducibility and 0.891-0.968 vs. 0.814-0.853 for intra-observer reproducibility). Significant differences in ZOOMit f, ZOOMit D^*, D^*, conventional D^*, and MRG between patients with SS and healthy individuals (all p < 0.05) were observed. ZOOMit D^* outperformed conventional D^* in diagnosing early- and mid-stage SS (area under receiver operating curve, 0.867 and 0.658, respectively; p = 0.002). The combination of ZOOMit D^*, MRG, and ZOOMit f as a new diagnostic index for SS, increased diagnostic area under the curve to 0.961, which was higher than that of any single parameter (all p < 0.01). Conclusion: Considering its better reproducibility and performance, ZOOMit IVIM may be preferred over conventional IVIM MRI, and may subsequently improve the ability to diagnose early- and mid-stage SS.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.1-8
• /
• 2016

Generally, electrical circuits are fabricated as Printed Circuit Boards (PCBs) and mounted on the casing of the product. Additionally, this requires many other parts and some labor for assembly. Recently, molding technology has increasingly been applied to embed simple circuits in plastic casing. The technology is called a Molded Interconnected Device (MID). By using this technology, PCB fabrication can be replaced by molding, and much of the corresponding assembly process for PCBs can be eliminated if the circuit is simple enough for molding. Furthermore, as the improvement of conductive materials and printing technologies of simple electric circuits can be printed directly on the casing part, this also reduces the complexity of the product design and production cost. Therefore, this paper introduces a new MID fabrication process using direct 3D printing technology. Additionally, it is applied to an automotive part of a cruise control switch. The methodology and design are shown.

• Medical Lasers
• /
• 제10권2호
• /
• pp.82-89
• /
• 2021

Background and Objectives Due to changes in diet and lifestyle, the number of obese people worldwide is steadily increasing. Obesity has an adverse effect on a healthy life, so it needs treatment and improvement. Research related to this is continuously being conducted. Materials and Methods The laser system to compact designed using 808 nm laser diode and Neodymium Yttrium orthovanadate generates a 1064 nm wavelength, the periodically polarized nonlinear crystal pumping laser beam. The pulsed 1064 nm wavelength beam passing through the AO Q-switch is used as the pumping light of the nonlinear optical crystal and is irradiated to the periodic polarized nonlinear optical crystal with a quasi-phase matching period. Nonlinear optical crystals use an oven to control the temperature to generate the desired 1980 nm and 2300 nm wavelengths. Results The 1980 nm and 2300 nm wavelengths generated by temperature control of nonlinear optical crystals are effective for lipolysis. A fiber catheter was used so that the laser could be directly irradiated to the fat cells. In particular, the new wavelength (1980 nm, 2300 nm) can increase the fat reduction effect with low energy (1.3 W). When a laser with a combination wavelength of 1980 nm and 2300 nm was used, an average lipolysis effect of 20% was obtained. Conclusion A mid-infrared lipolysis laser system with excellent absorption of fat and water has been developed. We conducted a princlinical study to confirm the efficacy and safety of the lipolysis laser system, and obtained good results for lipolysis with low energy.

• 한국컴퓨터정보학회논문지
• /
• 제21권5호
• /
• pp.41-47
• /
• 2016

This paper considers simple polygon search problem. How many searchers find a mobile intruder that is arbitrarily faster than the searcher within polygon art gallery? This paper uses the visibility graph that is connected with edges for mutually visible vertices. Given visibility graph, we select vertex u that is conjunction ${\Delta}(G)$ in $N_G(v)$ for $d_G(v){\leq}4$. We decide 1-searchable if $1{\leq}{\mid}u{\mid}{\leq}2$ and 2-searchable if ${\mid}u{\mid}{\geq}3$. We also present searcher's shortest path. This algorithm is verified by varies 1 or 2-searchable polygons.

• 대한수학회지
• /
• 제57권1호
• /
• pp.89-111
• /
• 2020

In the present paper, we give some characterization of the L₂ maximal estimate for the operator P^t_a,γf(Γ(x, t)) along curve with complex time, which is defined by $$P^t_{a,{\gamma}}f({\Gamma}(x,t))={\displaystyle\smashmargin{2}{\int\nolimits_{\mathbb{R}}}}\;e^{i{\Gamma}(x,t){\xi}}e^{it{\mid}{\xi}{\mid}^a}e^{-t^{\gamma}{\mid}{\xi}{\mid}^a}{\hat{f}}({\xi})d{\xi}$$, where t, γ > 0 and a ≥ 2, curve Γ is a function such that Γ : ℝ×[0, 1] → ℝ, and satisfies Hölder's condition of order σ and bilipschitz conditions. The authors extend the results of the Schrödinger type with complex time of Bailey [1] and Cho, Lee and Vargas [3] to Schrödinger operators along the curves.