• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.7
• /
• pp.549-557
• /
• 2008

Despite of the laminar-turbulent transition region co-exist with fully turbulence region around the leading edge of an airfoil, still lots of researchers apply to fully turbulence models to predict aerodynamic characteristics. It is well known that fully turbulent model such as standard k-model couldn't predict the complex stall and the separation behavior on an airfoil accurately, it usually leads to over prediction of the aerodynamic characteristics such as lift and drag forces. So, we apply correlation based transition model to predict aerodynamic performance of the NREL (National Renewable Energy Laboratory) Phase IV wind turbine. And also, compare the computed results from transition model with experimental measurement and fully turbulence results. Results are presented for a range of wind speed, for a NREL Phase IV wind turbine rotor. Low speed shaft torque, power, root bending moment, aerodynamic coefficients of 2D airfoil and several flow field figures results included in this study. As a result, the low speed shaft torque predicted by transitional turbulence model is very good agree with the experimental measurement in whole operating conditions but fully turbulent model(${\kappa}-\;{\varepsilon}$) over predict the shaft torque after 7m/s. Root bending moment is also good agreement between the prediction and experiments for most of the operating conditions, especially with the transition model.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.854-857
• /
• 1996

Absorption and luminescence spectra of Eu3+ (aquo) and the two different 1: 3 Eu3+: ligand systems in aqueous solutions are measured under mild acidic pH condition. The oxydiacetate (ODA) and dipicolinate (DPA) ligands, forming the similar geometric complexes, are used in this work. The three intensity parameters, Ωλ (λ=2, 4, and 6) are empirically determined by applying the Judd-Ofelt theorem to the oscillator strengths of the six absorption bands arising from the ground 7F0 state. Among the three intensity parameters, the Ω2 is found to response markedly to a miner change in the ligand environment via the 7F0→5D0 transition. In addition, the relative oscillator strengths of the four luminescence bands in the visible region, assigned to the 5D0→7FJ (J=1, 2, 3 and 4) transitions are obtained to investigate their sensitivity to the ligand environment. Among the four bands, the 610 nm band, attributed to the 5D0→7F2 transition, shows hypersensitivity in the luminescence.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.3-7
• /
• 2007

The characteristics of asymmetric vortex and side force of tangent-ogive-cylinder flight vehicle at high angles of attack have been performed by using upwind Navier-Stokes method with the ${\kappa}-{\omega}$ turbulence model. And Asymmetric transition positions are considered for generation of asymmetric vortex.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.182-188
• /
• 2004

We demonstrate a $2.1\;{\times}\;1.0\;{\times}\;0.1cm^3$ sized compact transmitter using LTCC System-in-Package (SiP) technology for 60GHz-band wireless communication applications. For low-attenuation characteristics and resonance suppression of the SiP, we have proposed and demonstrated a coplanar double wire-bond transition and novel CPW-to-stripline transition integrating air-cavities as well as novel air-cavities embedded CPW line. The fabricated transmitter achieves an output of 13dBm at a RF frequency of 62GHz, an IF frequency of 2.4GHz, and a LO frequency of 59.6GHz. The up-conversion gain is 11dB, while the LO signal is suppressed with the image rejection mixer below -21.4dBc, and the image and spurious signals are also suppressed below -31dBc.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.187-202
• /
• 2017

The classical electron band theory is a powerful tool to describe the electronic structures of solids. However, the band theory and corresponding density functional theory become inappropriate if a system comprises localized electrons in a scenario wherein strong electron correlations cannot be neglected. $SrRuO_3$ is one such system, and the partially localized d-band electrons exhibit some interesting behaviors such as enhanced effective mass, spectral incoherency, and oppression of ferromagnetism and itinerancy. In particular, a Metal-Insulator transition occurs when the thickness of $SrRuO_3$ approaches approximately four unit cells. In the computational studies, irrespective of the inclusion of on-site Hubbard repulsion and Hund's coupling parameters, correctly depicting the correlation effects is difficult. Because the oxygen atoms and the symmetry of octahedra are known to play important roles in the system, scrutinizing both the electronic band structure and the lattice system of $SrRuO_3$ is required to find the origin of the correlated behaviors. Transmission electron microscopy is a promising solution to this problem because of its integrated functionalities, which include atomic-resolution imaging and electron energy loss spectroscopy.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.167-178
• /
• 2019

Open-pit (OP) and underground (UG) mining are usually used to exploit shallow and deep ore deposits, respectively. When mine deposit starts from shallow subsurface and extends to a great depth, sequential use of OP and UG mining is an efficient and economical way to maintain mining productivity. However, a transition from OP to UG mining could induce significant rock movements that cause the slope instability of the open pit. Based on Yanqianshan Iron Mine, which was in the transition from OP to UG mining, a large-scale two-dimensional (2D) model test was built according to the similar theory. Thereafter, the UG mining was carried out to mimic the process of transition from OP to UG mining to disclose the triggered rock movement as well as to assess the associated slope instability. By jointly using three-dimensional (3D) laser scanning, distributed fiber optics, and digital photogrammetry measurement, the deformations, movements and strains of the rock slope during mining were monitored. The obtained data showed that the transition from OP to UG mining led to significant slope movements and deformations that can trigger catastrophic slope failure. The progressive movement of the slope could be divided into three stages: onset of micro-fracture, propagation of tensile cracks, and the overturning and/or sliding of slopes. The failure mode depended on the orientation of structural joints of the rock mass as well as the formation of tension cracks. This study also proved that these non-contact monitoring technologies were valid methods to acquire the interior strain and external deformation with high precision.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2723-2728
• /
• 2009

The conformational properties of oligosaccharides are important to understand carbohydrate-protein interactions. A trimannoside, methyl 3,6-di-O-($\alpha$-D-Man)-$\alpha$-D-Man (TRIMAN) is a basic unit of N-linked oligosaccharides. This TRIMAN moiety was further modified by GlcNAc (BISECT), which is important to biological activity of N-glycan. To characterize the trimannoside and its bisecting one we performed a molecular dynamics simulation in water. The resulting models show the conformational transition with two major and minor conformations. The major conformational transition results from the $\omega$ angle transition; another minor transition is due to the $\psi$ angle transition of $\alpha$ (1 $\rightarrow$ 6) linkage. The introduction of bisecting GlcNAc on TRIMAN made the different population of the major and minor conformations of the TRIMAN moiety. Omega ($\omega$) angle distribution is largely changed and the population of gt conformation is increased in BISECT oligosaccharide. The inter-residue hydrogen bonds and water bridges via bisecting GlcNAc residue make alterations on the local and overall conformation of TRIMAN moiety. These changes of conformational distribution for TRIMAN moiety can affect the overall conformation of N-glycan and the biological activity of glycoprotein.

• Computers and Concrete
• /
• v.4 no.2
• /
• pp.135-156
• /
• 2007

Three 3D nonlinear finite-element models are developed to study the behavior of concrete beams and plates with and without external reinforcement by fibre-reinforced plastic (FRP). All three models are formulated based upon the 3D theory of elasticity. The stress model is modified from the element developed by Ramtekkar, et al. (2002) to incorporate material nonlinearity in the formulation. Both transverse stress and displacement components are used as nodal degrees-of-freedom to ensure the continuity of both stress and displacement components between the elements. The displacement model uses only displacement components as nodal degrees-of-freedom. The transition model has both stress and displacement components as nodal degrees-of-freedom on one surface, and only displacement components as nodal degrees-of-freedom on the opposite surface. The transition model serves as a connector between the stress and the displacement models. The developed models are validated by comparing the results of the analyses with an existing experimental result. Parametric studies of the effects of the externally reinforced FRP on the load capacity of reinforced concrete (RC) beams and concrete plates are performed to demonstrate the practicality and the efficiency of the proposed models.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.489-493
• /
• 2012

Green phosphors $K_2BaW_2O_8:Tb^{3+}$(1.0 mol%) were synthesized by solid state reaction method. Differential thermal analysis was applied to trace the reaction processes. Three endothermic values of 95, 706, and $1055^{\circ}C$ correspond to the loss of absorbed water, the release of carbon dioxide, and the beginning of the melting point, respectively. The phase purity of the powders was examined using powder X-ray diffraction(XRD). Two strong excitation bands in the wavelength region of 200-310 nm were found to be due to the ${WO_4}^{2-}$ exciton transition and the 4f-5d transition of $Tb^{3+}$ in $K_2BaW_2O_8$. The excitation spectrum presents several lines in the range of 310-380 nm; these are assigned to the 4f-4f transitions of the $Tb^{3+}$ ion. The strong emission line at around 550 nm, due to the $^5D_4{\rightarrow}^7F_5$ transition, is observed together with weak lines of the $^5D_4{\rightarrow}^7F_J$(J = 3, 4, and 6) transitions. A broad emission band peaking at 530 nm is observed at 10 K, while it disappears at room temperature. The decay times of $Tb^{3+}$ $^5D_4{\rightarrow}^7F_5$ emission are estimated to be 4.8 and 1.4 ms, respectively, at 10 and 295 K; those of the ${WO_4}^{2-}$ exciton emissions are 22 and 0.92 ${\mu}s$ at 10 and 200 K, respectively.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.159-165
• /
• 1999

The adsorption and separation behaviors of transition metal ions using a merrifield resin bound 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclopentadecane (NTOE) and 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane(NDOE) were investigated in aqueous solution. The orders of adsorption degree(E) and distribution ratio(D) of transition metal ions were Cu(II)$t_R$) of metal ions were affected by adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of Ag(I) from mixed metal solution.