• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.126-140
• /
• 2023

In this study, the cause of subsidence in limestone mine was analyzed using a LiDAR-based geometry model. Using UAV and ground-based LiDAR systems, a precise geometry model was constructed for the subsidence surface and mine tunnel, and the results of on-site geological survey and rock mass classification were utilized. Through the geometry model, distribution of thickness of crown pillar and faults around the subsidence area, calculation of the volume of the subsidence area and subsidence deposit, and analysis of the subsidence surface inclination were conducted. Through these analyzes, the causes of ground subsidence were identified.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.287-292
• /
• 2005

The flowfields generated by gaseous slot injection into a supersonic flow at a Mach number of 3.75 and a Reynolds number of $2.07{\times}10^7$ are simulated numerically. Fine-scale turbulence effects are represented by a two-equation(k-w SST model) closure model which includes $y^+$ effects on the turbulence model. Grid convergence index(GCI) is also considered to provide a measure of uncertainty of the grid convergence. Comparison is made with experimental data and other turbulence model in term of surface static pressure distributions, the length of the upstream separation region, and the penetration height. Results indicate that the k-w SST model correctly predicts mean surface pressure distribution and upstream separation length. However, it is also observed that the numerical simulation over predicts the pressure spike and penetration height compared with experimental data. All these results are taken within $1\%$ error band of grid convergence.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.792-801
• /
• 1997

In this paper we propose an algorithm which fits a surface to noise-corrupted data points using an aceive sur-vace with global deformations.It is 3-dimensional surface extension of our precious works on 2-dimensional curve modell[11,12].We use fimite differences,and represent shapes of surface as global transfromation suring evolution based on the ballon [odel[2,3]which allows partial inflation or deflation by using niegborhood'sextermal foreces on each node points.At first,we make local deformations based on the balloon [odel,and then the blobal transformation from the surface before deformations to the defomed surface is calcualted by the deterministic lest squre method,finally we apply the global transformation to the surface before deformations.In experiments we fit a surface(elliposid,B-spline)to noise-corrupted 3D data points using the active surface with affine deformations.

• International Journal of CAD/CAM
• /
• v.3 no.1_2
• /
• pp.97-109
• /
• 2003

A large scale polygon models are often used to approximately represent 3D CAD models in Digital Engineering environment such as DMU (Digital Mockups) and network based collaborative design. However, they are not suitable for distribution on the network and for interactive rendering. We introduce a new coding system based on subdivision schemes called S-CODE system. In this system, it is possible to highly compress the model with sufficient accuracy and to view the model efficiently in a level of detail (LOD) fashion. The method is based on subdivision surface fitting by which a subdivision surface and curves which approximate a face of a CAD model are generated. We also apply a subdivision method to analytic surfaces such as conical and cylindrical surfaces. A prototype system is developed and used for evaluation with reasonably complicated data. The results show that the method is useful as a CAD data coding system.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.155-168
• /
• 1996

The active site of cyclooxygenase was modeled by complementary receptor-cavity mapping procedure using 3D structures of the non-steroidal antiinflammatory drugs (NSAIDs). A total of 50 NSAIDs were chosen as data ligands which compete the same site on the enzyme. Partial atomic charges were estimated, and the energetic differences for various conformations were calculated so as to meet the need for a most efficient overlapping of the probably-equivalent functional groups of the ligand molecules. The structure activity relationships of the NSAIDs, if available, were fully considered throughout the modeling. The overall shape of the model obtained is similar to a boot-without-bottom. Most of inner surface of the cavity appeared as hydrophobic; two polar counterparts except the carboxyl-binding position were found. By this model, some clear explanations could be given on the experimental observations which were not satisfiably understood yet.

• Journal of Korea Multimedia Society
• /
• v.1 no.1
• /
• pp.26-36
• /
• 1998

It is very important study field in computer vision 'How we obtain 3D information from 2D image'. For this purpose, we must know position of camera, direction of light source, and surface reflectance property before we take the image, which are intrinsic information of the object in the scene. Among them, surface reflectance property presents very important clues. Most previous researches assume that objects have only Lambertian reflectance, but many real world objects have Non-Lambertian reflectance property. In this paper the new method for analyzing the properties of surface reflectance and reconstructing the shape of object through estimation of reflectance parameters is proposed. We have interest in Non-Lambertian reflectance surface that has specular reflection and diffuse reflection which can be explained by Torrance-Sparrow model. Photometric matching method proposed in this paper is robust method because it match reference image and object image considering the neighbor brightness distribution. Also in this thesis, the neural network based shaped reconstruction method is proposed, which can be performed in the absence of reflectance information. When brightness obtained by each light is inputted, neural network is trained by surface normal and can determine the surface shape of object.

• Journal of Environmental Impact Assessment
• /
• v.22 no.4
• /
• pp.329-343
• /
• 2013

According to previous studies, the increased air temperature can lead to change of thermal stratification structure of lakes and reservoirs. The changed thermal stratification may result in alteration of materials and energy flow. The objective of this study was to predict the effect of climate change on the water temperature and stratification structure of Daecheong Reservoir, located in Geum River basin of Korea, using a three-dimensional(3D) hydrodynamic model(ELCOM). A long-term(100 years) weather data set provided by the National Institute of Meteorological Research(NIMR) was used for forcing the 3D model. The model was applied to two different hydrological conditions, dry year(2001) and normal year(2004). It means that the effect of air temperature increase was only considered. Simulation results showed that the surface water temperature of the reservoir tend to increase in the future, and the establishment of thermal stratification can occur earlier and prolonged longer. As a result of heat flux analysis, the evaporative heat loss can increase in the future than now and before. However, the convective heat loss and net long wave radiation from water surface decreased due to increased air temperature.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.939-944
• /
• 2004

The numerical methods including the performance analysis and the noise prediction of the centrifugal compressor impeller are coupled with the optimization design skill, which consists of response surface method, statistical approach, and genetic algorithm. The flow-field Inside of a centrifugal compressor is obtained numerically by solving Wavier-Stokes equations. and then the propagating noise is estimated from the distributed surface pressure by using Ffowcs Williams-Hawkings formulation. The quadratic response surface model with D-optimal 3-level factorial experimental design points is constructed to optimize the impeller geometry for the advanced centrifugal compressor. The statistical analysis shows that the quadratic model exhibits a reasonable fitting quality resulting in the impeller blade design with high performance and low far-field noise level. The influences of selected design variables, objective functions, and constraints on the impeller performance and the impeller noise are also examined as a result of the optimization process.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.21-23
• /
• 2011

Uniformity of plasma etching processes critically depends on the wafer temperature and its distribution. The wafer temperature is affected by plasma, chucking force, He back side pressure and the surface temperature of ESC(electrostatic chuck). In this work, 3D mathematical modeling is used to investigate the influence of the geometry of coolant path and the temperature distribution of the ESC surface. The model that has the coolant path with less change of the cross-sectional area and the curvature shows low standard deviation of the ESC surface temperature distribution than the model with the coolant path of the larger surface area and more geometric change.

• Current Optics and Photonics
• /
• v.8 no.5
• /
• pp.484-492
• /
• 2024

In response to the difficulty of synchronously obtaining multiwavelength images for fast two-dimensional (2D) temperature measurement, a multispectral framing imaging optical system is designed, based on the segmented-aperture imaging method and asymmetric surface shape. The system adopts a common-aperture four-channel array structure to synchronously collect multiwavelength temperature-field images. To solve the problem of asymmetric aberration caused by being off-axis, a model of the relationship between incident and outgoing rays is established to calculate the asymmetric custom surface. The designed focal length of the optical system is 80 mm, the F-number is 1:3.8, and the operating wavelength range is 0.48-0.65 ㎛. The system is divided into four channels, corresponding to wavelengths of 0.48, 0.55, 0.58, and 0.65 ㎛ respectively. The modulation transfer function value of a single channel lens is higher than 0.6 in the full field of view at 35 lp/mm. The experimental results show that the asymmetric-custom-surface imaging system can capture clear multiwavelength images of a temperature field. The framing imaging system can capture clear images of multiwavelength temperature fields, with high consistency in images of different wavelengths. The designed optical system can provide reliable multiwavelength image data for 2D temperature-field measurement.