Current Optics and Photonics

Optical Society of Korea (한국광학회)
권호 표지
DOI QR코드

DOI QR Code

Design of an Asymmetric-custom-surface Imaging Optical System for Two-dimensional Temperature-field Measurement

  • Guanghai Liu (Institute of Optical Information Technology, School of Optoelectronic Engineering, Xi'an Technological University) ;
  • Ming Gao (Institute of Optical Information Technology, School of Optoelectronic Engineering, Xi'an Technological University) ;
  • Jixiang Zhao (Institute of Optical Information Technology, School of Optoelectronic Engineering, Xi'an Technological University) ;
  • Yang Chen (Institute of Optical Information Technology, School of Optoelectronic Engineering, Xi'an Technological University)
  • Received : 2024.06.05
  • Accepted : 2024.08.26
  • Published : 2024.10.25
Download PDF
⟨ Previous Next ⟩

Abstract

In response to the difficulty of synchronously obtaining multiwavelength images for fast two-dimensional (2D) temperature measurement, a multispectral framing imaging optical system is designed, based on the segmented-aperture imaging method and asymmetric surface shape. The system adopts a common-aperture four-channel array structure to synchronously collect multiwavelength temperature-field images. To solve the problem of asymmetric aberration caused by being off-axis, a model of the relationship between incident and outgoing rays is established to calculate the asymmetric custom surface. The designed focal length of the optical system is 80 mm, the F-number is 1:3.8, and the operating wavelength range is 0.48-0.65 ㎛. The system is divided into four channels, corresponding to wavelengths of 0.48, 0.55, 0.58, and 0.65 ㎛ respectively. The modulation transfer function value of a single channel lens is higher than 0.6 in the full field of view at 35 lp/mm. The experimental results show that the asymmetric-custom-surface imaging system can capture clear multiwavelength images of a temperature field. The framing imaging system can capture clear images of multiwavelength temperature fields, with high consistency in images of different wavelengths. The designed optical system can provide reliable multiwavelength image data for 2D temperature-field measurement.

Keywords

Acknowledgement

This study is supported by the Shaanxi Provincial Department of Science and Technology (Grant No. 2024GXYBXM-041).

References

  1. E. M. Vuelban, F. Girard, M. Battuello, P. Nemecek, M. Maniur, P. Pavlasek, and T. Paans, "Radiometric techniques for emissivity and temperature measurements for industrial applications," Int. J. Thermophys. 36, 1545-1568 (2015). 
  2. F. Girard, M. Battuello, and M. Florio, "Multiwavelength thermometry at high temperature: Why it is advantageous to work in the ultraviolet," Int. J. Thermophys. 35, 1401-1413 (2014). 
  3. W. Zhang, Q. Sun, S. Hao, J. Geng, and C. Lv, "Experimental study on the variation of physical and mechanical properties of rock after high temperature treatment," Appl. Therm. Eng. 98, 1297-1304 (2016). 
  4. A. Araujo, "Analysis of multi-band pyrometry for emissivity and temperature measurements of gray surfaces at ambient temperature," Infrared Phys. Technol. 76, 365-374 (2016). 
  5. H. Liu, S. Zheng, H. Zhou, and C. Qi, "Measurement of distributions of temperature and wavelength-dependent emissivity of a laminar diffusion flame using hyper-spectral imaging technique," Meas. Sci. Technol. 27, 025201 (2016). 
  6. K. Fuerschbach, J. P. Rolland, and K. P. Thompson, "Nodal aberration theory applied to freeform surfaces," in Internation Optical Design Conference (Optica Publishing Group, 2014), paper. ITh2A. 
  7. A. Bauer, E. M. Schiesser, and J. P. Rolland, "Starting geometry creation and design method for freeform optics," Nat. Commun. 9, 1756 (2018). 
  8. D. Reshidko and J. Sasian, "Method for the design of nonaxially symmetric optical systems using freeform surfaces," Opt. Eng. 57, 101704 (2018). 
  9. J. C. Minano, P. Benitez, and B. Narasimhan, "Freeform aplanatic systems as a limiting case of SMS," Opt. Express 24, 13173-13178 (2016). 
  10. T. Yang, G.-F. Jin, and J. Zhu, "Automated design of freeform imaging systems," Light: Sci. Appl. 6, e17081 (2017). 
  11. G. Lu and Y. Yan, "Temperature profiling of pulverized coal flames using multicolor pyrometric and digital imaging techniques," IEEE Trans. Instrum. Meas. 55, 1303-1308 (2006). 
  12. J. M. Densmore, B. E. Homan, M. M. Biss, and K. L. McNesby, "High-speed two-camera imaging pyrometer for mapping fireball temperatures," Appl. Opt. 50, 6267-6271 (2011). 
  13. E. R. Wainwright, S. W. Dean, S. V. Lakshman, T. P. Weihs, and J. L. Gottfried, "Evaluating compositional effects on the laser-induced combustion and shock velocities of Al/Zr-based composite fuels," Combust. Flame 213, 357-368 (2020). 
  14. D. J. Dagel, G. D. Grossetete, D. O. MacCallum, and S. P. Korey, "Four-color imaging pyrometer for mapping temperatures of laser-based metal processes," Proc. SPIE 9861, 986103 (2016). 
  15. J. Cao, "Research on colorimetric temperature measurement method based on light field camera," Ph. D. Thesis, Xi'an University of Electronic Science and Technology, China (2021). 
  16. Y. Li, L. Zhou, Z. Li, R. Shi, X. Wang, and S. Yang, "All optical framing imaging technology based on diffractive optical elements," Acta Opt. Sin. 41, 0232001 (2021). 
  17. K. Fuerschbach, J. P. Rolland, and K. P. Thompson, "Theory of aberration fields for general optical systems with freeform surfaces," J. Opt. Express 22, 26585-26606 (2014). 
  18. J.-B. Volatier and G. Druart, "Differential method for freeform optics applied to two-mirror off-axis telescope design," Opt. Lett. 44, 1174-1177 (2019).