• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.567-575
• /
• 2021

In order to correct the provided RPC and DEM generated from the high-resolution satellite images, the acquisition of the ground control point (GCP) must be preceded. This task is a very complicate that requires field surveys, GPS surveying, and image coordinate reading corresponding to GCPs. In addition, since it is difficult to set up and measure a GCP in areas where access is difficult or impossible (tidal flats, polar regions, volcanic regions, etc.), an alternative method is needed. In this paper, we propose a 3D surface matching technique using only the established ground coordinate package, avoiding the ground-image-location survey of the GCP to correct the DEM produced from WorldView-2 satellite images and the provided RPCs. The location data of the public control points were obtained from the National Geographic Information Institute website, and the DEM was corrected by performing 3D surface matching with this package. The accuracy of 3-axis translation and rotation obtained by the matching was evaluated using pre-measured GPS checkpoints. As a result, it was possible to obtain results within 2 m in the plane location and 1 m in height.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.134-140
• /
• 2017

Shape-from-shading (SFS) or stereo vision algorithms can be utilized to measure the shape of an object with imaging techniques for effective sensing in non-contact measurements. SFS algorithms could reconstruct the 3D information from a 2D image data, offering relatively comprehensive information. Meanwhile, a stereo vision algorithm needs several feature points or lines to extract 3D information from two 2D images. However, to measure the size of an object with a freeform surface, the two algorithms need some additional information, such as boundary conditions and grids, respectively. In this study, a stereo vision scheme using the depth information obtained by shape-from-shading as patterns was proposed to measure the size of an object with a freeform surface. The feasibility of the scheme was proved with an experiment where the images of an object were acquired by a CCD camera at two positions, then processed by SFS, and finally by stereo matching. The experimental results revealed that the proposed scheme could recognize the size and shape of freeform surface fairly well.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.209-214
• /
• 2004

This paper presents a RFM-based image matching algorithm which put constraints on the search space through the object-space approach. Also, the detail procedure of generating 3-D surface models from the RFM is introduced as an end-user point of view. The proposed algorithm provides the PML (Piecewise Matching Line) for image matching and reduces the search space to within the confined line-shape area.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.15-21
• /
• 2007

We propose a 3D modeling method for surface inspection of non-constant velocity moving object. 1'lie laser lines reflect tile surface curvature. We can acquire 3D surface information by analyzing projected laser lines on object. In this paper, we use multi-line laser to improve the single stripe method and high speed of single frame. Binarization and edge extraction of frame image were proposed for robust laser each line extraction. A new labeling method was used for laser line labeling. We acquired some feature points for image matching from the frame data and juxtaposed the frames data to obtain a 3D shape image. We verified the superiority of proposed method by applying it to inspect container's damages.

• The korean journal of orthodontics
• /
• v.42 no.4
• /
• pp.169-181
• /
• 2012

Objective: The purpose of this study was to develop superimposition method on the lower arch using 3-dimensional (3D) cone beam computed tomography (CBCT) images and orthodontic 3D digital modeling. Methods: Integrated 3D CBCT images were acquired by substituting the dental portion of 3D CBCT images with precise dental images of an orthodontic 3D digital model. Images were acquired before and after treatment. For the superimposition, 2 superimposition methods were designed. Surface superimposition was based on the basal bone structure of the mandible by surface-to-surface matching (best-fit method). Plane superimposition was based on anatomical structures (mental and lingual foramen). For the evaluation, 10 landmarks including teeth and anatomic structures were assigned, and 30 times of superimpositions and measurements were performed to determine the more reproducible and reliable method. Results: All landmarks demonstrated that the surface superimposition method produced relatively more consistent coordinate values. The mean distances of measured landmarks values from the means were statistically significantly lower with the surface superimpositions method. Conclusions: Between the 2 superimposition methods designed for the evaluation of 3D changes in the lower arch, surface superimposition was the simpler, more reproducible, reliable method.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.12a
• /
• pp.57-63
• /
• 2004

various applications is presented. It is based on rapid-prototyping of transparent model for flow visualization and on the use of refractive index matching that enables efficient and clear visualization of the flow inside the model. The model is immersed in the index-matching fluid in a glass tank so that any displacement and rotation of the model in the tank have no influence on the optical setup for image acquisition to be made through a glass wall. This can facilitate greatly the camera calibration for stereo PIV and 3-D PTV. As the flow model is generated directly from 3-D surface data, no laborious preparation of the flow model is needed. This approach for seamless linking of model generation and PIV measurement is applicable to various flow measurements in automobile, ship building, fluid machinery, turbine, electrical appliances, heat exchanger, electronic cooling, bio-engineering and so on.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.104-115
• /
• 1999

This paper proposes an efficient method for 3D modeling of a human face from trinocular images by reconstructing face surface using range data. By using a trinocular camera system, we mitigated the tradeoff between the occlusion problem and the range resolution limitation which is the critical limitation in binocular camera system. We also propose an MPC_MBS (Matching Pixel Count Multiple Baseline Stereo) area-based matching method to reduce boundary overreach phenomenon and to improve both of accuracy and precision in matching. In this method, the computing time can be reduced significantly by removing the redundancies. In the model generation sub-pixel accurate surface data are achieved by 2D interpolation of disparity values, and are sampled to make regular triangular meshes. The data size of the triangular mesh model can be controlled by merging the vertices that lie on the same plane within user defined error threshold.

• Applied Microscopy
• /
• v.46 no.2
• /
• pp.71-75
• /
• 2016

The scanning electron microscope (SEM) offers two-dimensional (2D) micrographs of three-dimensional (3D) objects due to its inherent operating mechanisms. To overcome this limitation, other devices have been used for quantitative morphological analysis. Many efforts have been made on the applications of software-based approaches to 3D reconstruction and measurements by SEM. Based on the acquisition of two stereo images, a multi-view technique consists of two parts: (i) geometric calibration and (ii) image matching. Quantitative morphological parameters such as height and depth could be nondestructively measured by SEM combined with special software programs. It is also possible to obtain conventional surface parameters such as roughness and volume of biomedical specimens through 3D SEM surface reconstruction. There is growing evidence that conventional 2D SEM without special electron detectors can be transformed to 3D SEM for quantitative measurements in biomedical research.

• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.207-215
• /
• 2022

The latest volumetric technology's high geometrical accuracy and realism ensure a high degree of correspondence between the real object and the captured 3D model. Nevertheless, since the 3D model obtained in this way constitutes a sequence as a completely independent 3D model between frames, the consistency of the model surface structure (geometry) is not guaranteed for every frame, and the density of vertices is very high. It can be seen that the interconnection node (Edge) becomes very complicated. 3D models created using this technology are inherently different from models created in movie or video game production pipelines and are not suitable for direct use in applications such as real-time rendering, animation and simulation, and compression. In contrast, our method achieves consistency in the quality of the volumetric 3D model sequence by linking re-meshing, which ensures high consistency of the 3D model surface structure between frames and the gradual deformation and texture transfer through correspondence and matching of non-rigid surfaces. And It maintains the consistency of volumetric 3D model sequence quality and provides post-processing automation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1698-1706
• /
• 1997

In this paper, we envisioned a multimedia object recognition system processing and combinig information from all available sources, such as 2-D, 3-D, color and sound data. Out of the overall system, we proposed 3-D information extraction and object recognition methods. Firstly, surfaces are classified by z-gradient from the range data, surface features are extracted using the intersection of normal vectors. Also feature relationship such as intersection angle and distance is established between the surfaces. Secondly, recognition is accomplished by matching process which is improtant step in the image understanding systems. Matching process is very improtant procedures because of more general and more efficient method is needed in the field of multimedia sytem. Therefore, we focused the proposal of matching process and in this article, first of all, we deal with the matching process of the 3-D object. Similarity measures are calculated.