• 토지주택연구
• /
• 제4권3호
• /
• pp.271-277
• /
• 2013

수평하중을 받는 말뚝의 거동 예측에는 일반적으로 비선형 p-y 곡선을 이용한 BNWF(Beam on Nonlinear Winkler Foundation) 해석법이 주로 사용된다. BNWF 해석법은 다양한 사례를 통하여 정확성이 입증된 반면 군말뚝의 경우 p-multiplier를 사용해야 하는 단점을 가지고 있다. 이와같은 단점은 유한요소 또는 차분법의 사용으로 해결할 수 있다. 이 방법 적용 시, 지반과 말뚝은 솔리드 요소로 모델링된다. 하지만, 말뚝을 솔리드 요소로 모사하게 되면 회전 자유도가 없어 정확성이 감소하며 이를 극복하기 위해서는 요소의 크기를 현저하게 감소시켜야 하지만 3D 해석에서 요소 수의 증가는 막대한 연산시간이 요구되므로 적용에 문제가 있다. 본 연구에서는 이와 같은 단점을 극복하는 빔요소와 Rigid 링크를 이용한 말뚝 모델링 방법을 구축하였으며 이의 적용성을 현장시험결과와 BNWF의 비교를 통하여 검증하였다. 사용된 해석 프로그램은 지진공학용으로 개발된 OpenSees이다. 비교 결과, 빔요소와 Rigid 링크를 이용한 방법은 비교적 정확하게 현장시험결과와 일치하는 것을 확인하였다. 추후 이 방법은 군말뚝의 해석에 효과적으로 사용될 수 있을 것으로 판단된다.

• 한국전산구조공학회논문집
• /
• 제35권3호
• /
• pp.167-174
• /
• 2022

본 연구는 신축이음장치를 설치하지 않고 상부구조와 교대를 일체화하는 무조인트 교량의 거동해석에 대한 것이다. 선행연구에서는 민감도 해석을 통해 무조인트 교량의 최적 수치해석 모들은 상대오차에 의한 변위 형상의 유사성과 정밀도를 유지하면서 실용적인 shell 요소 기반 모델이 가장 적합한 것으로 판단하였다. 따라서 본 연구에서는 shell 요소 기반 모델과 solid 요소 모델간의 벽체 깊이별 거동 분석을 수행하였다. 또한 MIDAS Civil과 ABAQUS를 사용하여 해석 프로그램간 비교를 하였다. 반일체식 교대 교량인 A 교와 B 교의 경우 선형 스프링 조건인 Case 1, +30℃의 경우 지반반력으로 인해 벽체 깊이가 깊어질수록 변위가 감소하였다. -30℃의 경우는 지반반력이 작용하지 않으므로 변위 변화가 미소하였다. 완전일체식 교대 교량인 C 교와 흉벽일체식 교대 교량인 D 교의 경우 말뚝의 저항력으로 인하여 +30℃, -30℃ 모두 벽체 깊이가 깊어질수록 변위가 감소하였다. 해석 프로그램간 비교는 Case 1의 경우 상대오차는 미소하였으나 Case 2의 경우는 차이가 발생하였다. 이는 해석 프로그램에 따른 비선형 스프링의 적용 방식의 차이로 인한 것으로 판단된다.

• Advances in materials Research
• /
• 제8권2호
• /
• pp.117-135
• /
• 2019

The lifetime of a gas turbine combustor is typically limited by the durability of its liner, the structure that encloses the high-temperature combustion products. The primary objective of the combustor thermal design process is to ensure that the liner temperatures do not exceed a maximum value set by material limits. Liner temperatures exceeding these limits hasten the onset of cracking which increase the frequency of unscheduled engine removals and cause the maintenance and repair costs of the engine to increase. Hot gas temperature prediction can be considered a preliminary step for combustor liner temperature prediction which can make a suitable view of combustion chamber conditions. In this study, the temperature distribution of ceramic panels for a V94.2 gas turbine combustor subjected to realistic operation conditions is presented using three-dimensional finite difference method. A simplified model of alumina ceramic is used to obtain the temperature distribution. The external thermal loads consist of convection and radiation heat transfers are considered that these loads are applied to flat segmented panel on hot side and forced convection cooling on the other side. First the temperatures of hot and cold sides of ceramic are calculated. Then, the thermal boundary conditions of all other ceramic sides are estimated by the field observations. Finally, the temperature distributions of ceramic panels for a V94.2 gas turbine combustor are computed by MATLAB software. The results show that the gas emissivity for diffusion mode is more than premix therefore the radiation heat flux and temperature will be more. The results of this work are validated by ANSYS and ABAQUS softwares. It is showed that there is a good agreement between all results.

• 한국지반공학회지:지반
• /
• 제13권3호
• /
• pp.33-52
• /
• 1997

비선형 3차원 유한요소 해석법을 이용하여 타이백으로 억지된 토류벽의 거동을 분석하여 설계시에 고려되는 중요 파라미터의 영향을 조사하였다. 제안된 유한요소기법에서 엄지말뚝과 텐던 정착길이는 빔요소로, 토류판은 쉘요소로, 텐던 비정착길이는 스프링 요소로 모델링하였다. 사용된 흙의 거동모델은 사질토의 비선형 거동 특성과 응력이력을 고려할 수 있는 기존의 Hyperbolic 모델을 수정하여 사용하였으며 벽체 전면에서의 굴착, 타이백 설치, 타이조임 그리고 재굴착 등의 모든 축조과정을 단계별로 해석할 수 있는 시뮬레이션 기법을 제안하였다. 여러 가지 주요 설계인자를 변화시키며 파라메트릭 해석을 수행하였고 이 결과 앵커의 위치, 앵커의 비정착 길이, 앵커 조임 하중의 크기와 엄지말뚝의 근입긴이등의 영향을 밝혀낼 수 있었다. 이 해석 결과를 토대로 새로운 설계지침을 제안하였다.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.38-44
• /
• 2019

The Biochemical Methane Potential (BMP) of fresh leachate and domestic wastewaters codigestion was determined by laboratory Bach Tests at $35^{\circ}C$ over a period of 90 d using a wide range of leachates volumetric ratios from 0% to 100%. To simulate wastewaters plant treatment step, all the ratios were first air stripped for 48 h before anaerobic incubation. The kinetic of biogas production was assessed using modified Gompertz model and exponential equation. The results obtained showed that cumulative biogas production was insignificant in the case of wastewaters monodigestion while the codigestion significantly improves the BMP. Air stripping pretreatment had positive effect on both ammonium concentration and volatiles fatty acids with reduction up to 75% and 42%, respectively. According to the Modified Gompertz model, the optimal anaerobic co-digestion conditions both in terms of maximal biogas potential, start-up period and maximum daily biogas production rate, could be achieved within large leachate volumetric ratios from 25% to 75% with a maximum BMP value of 438.42 mL/g volatile solid at 50% leachate ratio. The positive effect of codigestion was attributed to a dilution effect of chemical oxygen demand and volatile fatty acid concentrations to optimal range that was between 11.7 to $32.3gO_2/L$ and 2.1 to 7.4 g/L, respectively. These results suggested that the treatment of fresh leachate by their dilution and co digestion at wastewaters treatment plants could be a promising alternative for both energetic and treatment purposes.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1617-1630
• /
• 2018

The crucial differences between conventional rail with split-type connectors and continuous welded rails are axial stress in the longitudinal direction and stability, as well as other issues generated under the influence of loading effects. Longitudinal stresses generated in continuously welded rails on railway bridges are strongly influenced by the nonlinear behavior of the supporting system comprising sleepers and ballasts. Thus, the track structure interaction cannot be neglected. The rail-support system mentioned above has properties of non-uniform material distribution and uncertainty of construction quality. The linear elastic hypothesis therefore cannot correctly evaluate the stress distribution within the rails. The aim of this study is to apply the nonlinear finite element method using the nonlinear coupling interface between the track and structural model and to illustrate the welded rail behavior under the loading effect and uncertain factors of the ballast. Numerical results of nonlinear finite analysis with a three-dimensional solid and frame element model are presented for a typical track-bridge system. A composite plate girder, modeled by solid and shell elements, is also analyzed to consider the behavior of the welded rail. The analysis result showed buckling under the independent calculations of load cases, including 'temperature change', 'bending of the supporting structure', and 'braking' of the railway vehicle. A parametric study of the load combination method and the loading sequence is also included in this analysis.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권3호
• /
• pp.43-47
• /
• 2003

For an electrical insulation design of HTS cable, it is important to understand the dielectric characteristics of insulation materials in $LN_2$ and the insulation type. Generally, the electrical insulation of HTS Cable is classified into two types of the composite insulation and solid insulation type. In this research, we selected the insulation paper/$LN_2$ composite insulation type for the electric insulation of a HTS cable, and studied electric insulation characteristics of synthetic Laminated Polypropylene Paper (LPP) in liquid nitrogen ($LN_2$) for the application to high temperature superconducting (HTS) cable. Furthermore, we compared the breakdown characteristics of the butt gap and bended mini-model cable. It is necessary to understand the winding parameter of insulation paper/$LN_2$ composite insulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.718-723
• /
• 2005

In this paper, we propose the collaborative design system with which we can simultaneously modify the actual 3D CAD model by the remote control and have interaction on it. It enables instantaneous decision making among the multiple disciplines in distributed locations using the function of simultaneous access and video conference. It also provides the method of managing the consistency between design entities. This system consists of Collaborative Management Server, File Server, Solid Modeler Client, Remote Control Module and Client Module.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.104-110
• /
• 2005

GIS(Gas Insulated Switchgear) is used in electric power system, to insure non conductivity, breaking capacity and operating reliability. The commercial dynamic analysis code COSMOS MOTION and 3-D modeling program SOLID WORKS were used to simulate dynamic analysis of the closing resistors of the GIS in this paper. To reduce chatter vibration of closing resistors, the motion of moving and fixed parts of closing resistors were simulated by varying the spring constant, the damping coefficient and the mass of moving and fixed parts. The simulated results were compared with experimental results. As a result, chatter vibration of closing resistors of the GIS could be reduced by using the results. These data can be used to determine the spring constant, the damping coefficient and mass of a moving part to reduce chatter vibration when the next model is developed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1061-1064
• /
• 2006

Optimal design of functionally graded plates is investigated considering stress and critical temperature. Material properties are assumed to be temperature dependent and varied continuously in the thickness direction. The effective material properties are obtained by applying linear rule of mixtures. The 3-D finite element model is adopted using an 18-node solid element to analyze more accurately the variation of material properties and temperature field in the thickness direction. For stress analysis, the tensile stress ratio and compressive stress ratio of the structure under mechanical load are investigated. In the thermo-mechanical buckling analysis, temperature at each node is obtained by solving the steady-state heat transfer problem and Newton-Raphson method is used for material nonlinear analysis. Finally, the optimal design of FGM plates is studied for stress reduction and improving thermo-mechanical buckling behavior, simultaneously.