• KIEAE Journal
• /
• 제16권1호
• /
• pp.89-94
• /
• 2016

This study is part of three-dimensional(3D) heat transfer analysis program developmental process. The program is being developed without it's own built in 3D-modeller. So 3D-model must be created from another 3D-modeller such as generic CAD programs and imported to the developed program. After that, according to the 3D-geometric data form imported model, 3D-mesh created for numerical calculation. But the 3D-model created from another 3D-modeller is likely to have errors in it's geometric data such as mismatch of position between vertexes or surfaces. these errors make it difficult to create 3D-mesh for calculation. These errors are must be detected and cured in the pre-process before creating 3D-mesh. So, in this study four kinds of filters and functions are developed and tested. Firstly, 'vertex error filter' is developed for detecting and curing for position data errors between vertexes. Secondly, 'normal vector error filter' is developed for errors of surface's normal vector in 3D-model. Thirdly, 'intersection filter' is developed for extracting and creating intersection surface between adjacent objects. fourthly, 'polygon-line filter' is developed for indicating outlines of object in 3D-model. the developed filters and functions were tested on several shapes of 3D-models. and confirmed applicability. these developed filters and functions will be applied to the developed program and tested and modified continuously for less errors and more accuracy.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.17-21
• /
• 1989

SSI2D/3D is a computer program to calculate dynamic stiffness matrix of the foundation for soil-structure-interaction problem in frequency demain. It is written in FORTRAN 77 and applicable to two or three dimensional situations. In this paper the program structure is summarized. Two examples aye shown to demonstrate the possibilities of the Boundary Element Method applied to dynamic problems in infinite domains.

• 한국초등과학교육학회지:초등과학교육
• /
• 제37권3호
• /
• pp.323-338
• /
• 2018

The aims of this study are to develop the STEAM program focused '3D printing for respiratory system' and to ascertain its influence on elementary student's science process skills, creative problem solving abilities and scientific interest. The developed STEAM program was applied to 5th grade students of O elementary school located in J city. As a result of applying the STEAM program, the experimental group of the STEAM program class improved significantly in creative problem solving abilities and scientific interest than the control group of the theoretical class. The result of learner satisfaction survey of the STEAM program was high. Meanwhile, there was no significant difference in science process skills between the two groups. Therefore, the STEAM program class with the theme of '3D printing for respiratory system' could be meaningful works to encourage students' interest as well as their creative problem solving ability and scientific interest. In future, continuous and systematic studies on STEAM programs focused on 'structure and function of our body' are needed for elementary students' cognitive and affective developments.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.89-92
• /
• 2005

Each 3D visualization program has its own different structure as for the purpose. This paper describes the design and development of an on-line 3D core data visualization program, $RocDis^{TM}$, for the nuclear simulator. It is possible to analyze the inside of the core status including neutron flux, relative power, moderator and fuel temperature in 3D distribution. Some of other essential information, axial flux distribution etc. could also display in 2D graphs. This program would be design, tuning and training for the simulator core model.

• 한국임상수의학회지
• /
• 제40권4호
• /
• pp.268-275
• /
• 2023

In this paper, we designed 3D-printed orthopedic splint models for patient-specific external coaptation on fracture healing and analyzed the stability of the models through finite element method (FEM) analysis under compressive load conditions. Polylactic acid (PLA) and acrylonitrile-butadiene-styrene (ABS) based 3D splint models of the thicknesses 1, 3, 5 and 7 mm were designed, and Peak von Mises stress (PVMS) and maximum displacement (MD) of the models were analyzed by FEM under compressive loads of 50, 100, 150, and 200 N. The FEM results indicated that PVMS and MD values, regardless of material, had a negative correlation with the thickness of the models and a positive correlation with the compressive load. There was a risk of splint deformation under conditions more extreme than 100 N with 5 mm thickness. For successful clinical application of 3D-printed orthopedic splints in veterinary medicine, it is recommended that the splint should be produced not less than 5 mm thickness. Also, it is expected to be stable when the splint is applied to situations with a compressive load of 100 N or less. There is an advantage of overcoming the limitations of the existing bandage method through 3D-printing technology as well as verifying the stability through 3D modeling before application. Such 3D printing technology will be widely used in veterinary medicine and various fields as well as orthopedics.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.95-101
• /
• 2001

Steel bridges, which have been damaged by load and corrosion, need repair or strengthening. In general, before the repair welding procedure, cutting procedure carry out. Therefore, the investigating of the behavior of stress generated by cutting is so important for safety of structure. Residual stress produced by gas cutting was analyzed using 2D and 3D thermal elasto-plastic FEM. According to the results, the magnitude of temperature was analyzed by 2D-FEM is smaller than that was analyzed using the 3D-FEM program at the start and end edge of flange. And the magnitude and distribution of residual stress of perpendicular to the cutting line was analyzed by the 2D-FEM program was similar to that was analyzed by the 3B-FEM program. Therefore, it is possible to predict of cutting stress by 2D and 3D FEM.

• 대한지구과학교육학회지
• /
• 제8권2호
• /
• pp.193-205
• /
• 2015

In this study, a Virtual geological Field Trip(VFT) learning program using 3D panorama virtual reality techniques was developed to learn about the Gongju city 7 area located in Chungcheongnam-do, Korea. The developed $360^{\circ}$ 3D VFT program can show every face of observational points and interact as zoom-in, zoom-out and image rotation. For the educational effects of the materials, it is provided with a compass, a protractor, enlarged images, pop-up windows, etc.. The program was applied to the class of 35 gifted students in middle school to investigate the effectiveness of the program. The results showed that positive responses of the students were 90% or more. When geological field trip problems like cost, safety, distance occur in geological learning procedure of middle school science, this VFT program can become as a supplementary learning material and a solution.

• 대한수학교육학회지:수학교육학연구
• /
• 제16권4호
• /
• pp.345-366
• /
• 2006

본 연구에서는 3차원 공간도형의 학습에 유용한 동적 기하 소프트웨어인 Cabri3D 프로그램을 논의의 대상으로 하여 이를 공학적도구의 교육적 활용이라는 관점에서 수학 문제해결지도에 바람직하게 사용하는 방안에 대하여 살펴보았다. 예비수학교사들을 대상으로 학교수학에의 Cabri3D프로그램 활용에 관한 탐구 수업을 진행한 후, 중등수학의 지도에서 문제해결력 신장을 위해 이 프로그램이 효과적으로 활용될 수 있는 구체적인 사례들을 수집하였다. 폴리아가 제시하는 문제해결의 각 단계에 Cabri3D가 보조도구로서 유용한 역할을 할 수 있는 문제 사례와 그 활용방법을 예시하면서 현장의 수학교사들이 공학적 도구를 수학교육에 활용하는 방법에 대한 바람직한 관점을 갖게 하는데 도움을 주고자 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.371-378
• /
• 1999

A prototype computer program was developed which visualizes various kinds of geotechnical information using 3D object graphics techniques. The program integrates various kinds of geotechnical data such as surface geology map, boreholes data, geophysical data as well as man made subsurface structures. It also reads NGIS DXF map and generates digital elevation model from iso-elevation line layer of the DXF map. All the data are put into a 3D model as 3D objects. The created 3D model can be viewed and analysed in a interactive 3D way.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.387-392
• /
• 2001

This paper is to model a 30-shape product applying mathematically the data acquired from a 3D scanner and using an Automatic Design Program. The research studied in th reverse engineering up to now has been developed continuously and surprisingly. However, forming 3D-shape solid models in CAE and CAM, based on the research, the study leaves much to be desired. Especially, analyses and studies reverse-designing automatically using measured data after manufacturing. Consequently, we are going to acquire geometric data using an 3D scanner in this study with which we will open a new field of reverse engineering by a program which can design a 3D-shape solid model in a CAD-based program automatically.