• 한국환경과학회지
• /
• 제25권9호
• /
• pp.1241-1251
• /
• 2016

A minimum threshold for the signal to noise ratio ($SNR_{min}$) has to be set in the data processing system of wind profiler radar (WPR). The data collection rate and the accuracy of the WPR wind vector depend on the $SNR_{min}$. The WPR at Uljin is operated with an $SNR_{min}$ of 1 dB which is a relatively large threshold. We found that the accuracy and the continuity of the WPR wind vector with height were directly related to the variability of the SNR and vertical gradient of the squared refractive index. We investigated a quantitative method for determining a new $SNR_{min}$ for the WPR at Uljin and it was evaluated with radiosonde data. The accuracy and continuity of the wind vector from an SNR of less than 1 dB, began to decrease at an altitude of 3.5 km. Most of the SNR values were less than -3.5 dB in altitudes higher than 3.5 km. We retrieved high-accuracy wind vectors at altitudes over 3 km where measurements were deficient with an $SNR_{min}$ of 1 dB.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.3-7
• /
• 2006

Confocal scanning microscopy is a measurement technique used to observe micrometer and sub-micrometer features due to its high resolution, nondestructive properties, and 3D surface profiling capabilities. The design, implementation, and performance test of a confocal scanning microscopy system are presented in this paper. A short-wavelength laser (405 nm) and an objective lens with a high numerical aperture (0.95) were used to achieve the desired high resolution, while the x- and y-axis scans were implemented using an acousto-optic deflector and galvanomirror, respectively. An objective lens with a piezo-actuator was used to scan the z-axis. A spatial resolution of less than 138 nm was achieved, along with successful 3D surface reconstructions.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.192-197
• /
• 2003

The ‘AEIPR’(Accelerometer Established Inertial Profiling Reference) method has been applied to measure the road profile. The dynamic road profiling method using AEIPR has the advantages of cost effectiveness, measuring speed and relatively high reliability. However, it is required to improve the double integration algorithm to get the measurement results with the accuracy of hither level. In the first part of this paper, the effective double integration algorithm is suggested and the ‘Road Profiler’ software is developed on the basis of the algorithm. Road profiling tests are performed using the developed ‘Road Profiler’ system on the specially designed tracks for the durability tests and the various types of pubic roads. Test results are shown and evaluated by the international road evaluation indicies and classification.

• 대한치과의사협회지
• /
• 제58권1호
• /
• pp.19-26
• /
• 2019

Purpose: The purpose of this study is to compare the adhesion of Candida albicans according to build angle in 3D printing denture base resin. Methods: The 3D printing was performed by setting the build angle of the disk type specimen designed by CAD program at 0 degree, 30 degrees, 60 degrees, and 90 degrees. Surface roughness was measured using a non-contact 3D microsurface profiler. The specimens were incubated in Candida albicans suspension for 24 hours. The attached Candida albicans were detached by cell scraper. The suspension of detached C. albicans was serially diluted and plated on Trypticase soy broth. After 48 hours of incubation, total colony forming unit was counted. Results: There was no significant difference in surface roughness(Sa) between the test groups, but the interlayer boundary was observed. There was no statistically significant difference in total colony forming units of Candida albicans between the test groups. Conclusion: There was no difference in the average surface roughness and adhesion of Candida albicans between the specimens. It is considered that the setting of the build angle should be set considering the accuracy or strength rather than the roughness of the surface.

• 한국측량학회지
• /
• 제26권3호
• /
• pp.285-292
• /
• 2008

국가의 저수지를 효율적으로 운영할 수 있는 체계를 확립하고 각종 신기술의 적용을 통한 다양한 관리 방안을 모색하는 것은 향후 대국민 서비스의 질 향상 및 관련 기술들의 활용도 증대를 위해 매우 중요하다. 본 연구에서는 저수지에 장기간 축적되어 수질악화 및 저수용량의 감소를 야기하는 퇴적물 정보를 GPS, 음향측심기, 음파탐사기의 조합을 통해 신속 정확하게 구축하고 이러한 자료들을 2차원 및 3차원 공간정보 처리 기술의 적용을 통하여 객관적이고 효율적으로 퇴적량 산출을 수행할 수 있는 시스템을 설계하였다. 이를 토대로 저수지의 퇴적물 관리를 위해 필요한 여러 기능을 수행할 수 있는 퇴적량 산출 시스템을 개발하였으며 이의 적용을 통하여 건설된 지 오래된 저수지들에 대한 관리 기반 자료를 제시하고자 하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.175.1-175.1
• /
• 2015

CuSn thin films were deposited by rf magnetron co-sputtering method with pure Cu and Sn metal targets with a variety of rf powers. CuSn thin films were studied with a surface profiler (alpha step), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), X-ray diffraction (XRD), and contact angle measurement. The thickness of CuSn thin films was fixed at $200{\pm}10nm$ and deposition rate was calculated by the measured with a surface profiler. From the survey XPS spectra, the characteristic peaks of Cu and Sn were observed. Therefore, CuSn thin films were successfully synthesized on the Si (100) substrate. The oxidation state and chemical environment of Cu and Sn were investigated with the binding energy regions of Cu 2p XPS spectra, Sn 3d XPS spectra, and Cu LMM Auger spectra. Change of the crystallinity of the films was observed with XRD spectra. Using contact angle measurement, surface free energy (SFE) and wettability of the CuSn thin films were studied with distilled water (DW) and ethylene glycol (EG).

• 통합자연과학논문집
• /
• 제9권4호
• /
• pp.223-227
• /
• 2016

The Zn, Sn, and ZnSn thin films were deposited on Si(100) substrate using radio frequency (RF) magnetron co-sputtering method. A surface profiler and X-ray photoelectron spectroscopy (XPS) were used to investigate the Zn, Sn, and ZnSn thin films. Thickness of the thin films was measured by a surface profiler. The deposition rates of pure Zn and Sn thin films were calculated with thickness and sputtering time for optimization. From the survey XPS spectra, we could conclude that the thin films were successfully deposited on Si(100) substrate. The chemical environment of the Zn and Sn was monitored with high resolution XPS spectra in the binding energy regions of Zn 2p, Sn 3d, O 1s, and C 1s.

• 융합정보논문지
• /
• 제7권6호
• /
• pp.187-192
• /
• 2017

현재 Android 운영체제에서는 효율성이 검증된 Unity 최적화 방법이 존재한다. 그러나 Tizen 운영체제는 기존의 Unity 최적화 방법이 Tizen 운영 체제에 적용될 수 있는지, 얼마나 효과적인지 알려진 바가 많지 않다. 이 연구에서는 기존에 검증된 Android 운영체제의 Unity 최적화 기법들을 Tizen 운영체제에 적용했을 때의 성능에 대해 분석한다. 이를 위해 기존의 Unity 최적화 방법을 Tizen 운영 체제에 적용할 수 있는지를 조사하고 해당 기법들의 효율성을 Unity Profiler를 통해 평가한다. 이를 통해 향후 기존의 Android 운영체제에 대한 Unity 최적화 방안들에 대한 심층적 평가를 추가적으로 진행하고자 한다.

• 한국광학회지
• /
• 제15권4호
• /
• pp.287-292
• /
• 2004

광 커넥터 접합면의 스크래치가 삽입손실에 미치는 영향에 대하여 연구하였다. 광파의 투과계수가 스크래치의 깊이에 따라 선형적으로 변화한다고 가정하고 스크래치의 기하학적 파라미터들의 함수로 표현된 광 커넥터의 삽입손실을 계산하는 모델을 제시하였다. 3D Optical interferometry surface profiler를 이용하여 임의로 발생된 스크래치의 위치, 폭과 깊이와 같은 기하학적 파라미터들을 측정하였다. 측정된 삽입손실과 제안된 모델을 이용하여 계산한 삽입손실을 비교하여 스크래치의 깊이에 따라 선형적으로 변화하는 투과계수 식을 구하였다. 깊이에 따른 투과계수 식과 제시된 모델을 이용하여 스크래치로 인한 삽입손실을 스크래치의 위치, 폭과 깊이의 함수로 계산하였다. 스크래치가 코어 중심에서 코어 반경의 2배 정도를 벗어난 위치에 존재하면 삽입손실에 영향을 거의 주지 않음을 확인하였다.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.449-457
• /
• 2010

This study shows that the vertical migration speed of sound scattering layers (SSLs), which is distributed in near Funka Bay, were measured by 3D velocity components acquired from a bottom moorng ADCP. While the bottom mooring type has a problem to measure the velocity vectors of sound scattering layer distributed near to surface, both the continuous vertical migration patterns and variability of backscatterers were routinely investigated as well. In addition, the velocity vectors were compared with the vertical migration velocity estimated from echograms of Mean Volume Backscattering Strength, and estimated to produce observational bias due to SSLs which is composed of backscatterers such as euphausiids, nekton, and fishes have swimming ability.