• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.69-77
• /
• 2007

Purpose: To evaluate the accuracy of the imaging reformation of cone beam computed tomography for the assessment of bone defect healing in rat model. Materials and Methods: Sprague-Dawley strain rats weighing about 350 gms were selected. Then critical size bone defects were done at parietal bone with implantation of collagen sponge. The rats were divided into seven groups of 3 days, 1 week, 2 weeks, 3 weeks, 4 weeks, 6 weeks, and 8 weeks. The healing of surgical defect was assessed by multi planar reconstruction (MPR) images and three-dimensional (3-D) images of cone beam computed tomography, compared with soft X-ray radiograph and histopathologic examination. Results: MPR images and 3-D images showed similar reformation of the healing amount at 3 days, 1 week, 2 weeks, and 8 weeks, however, lower reformation at 3 weeks, 4 weeks, and 6 weeks. According to imaging-based methodologies, MPR image revealed similar reformation of the healing amount than 3-D images compare with soft X-ray image. Among the four threshold values for 3-D images, 400-500 HU revealed similar reformation of the healing amount. Histopathologic examination confirmed the newly formed trabeculation correspond with imaging-based methologies. Conclusion: MPR images revealed higher accuracy of the imaging reformation of cone beam computed tomography and cone beam computed tomography is a clinically useful diagnostic tool for the assessment of bone defect healing.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.

• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.243-248
• /
• 2019

The respiratory tract is an essential part of the respiratory system involved in the process of respiration. However, if stenosis occurs, it interferes with breathing and can even lead to death. Asthma is a typical example of a reversible cause of airway narrowing, and the number of patients suffering from acute exacerbation is steadily increasing. Therefore, it is important to detect airway narrowing early and prevent the patient's condition from worsening. Optical coherence tomography (OCT), which has high resolution, is suitable for observing the microstructure of tissues. In this study we developed an endoscopic OCT system. We combined a 1300-nm OCT system with a servo motor, which can rotate at a high speed. A catheter was pulled back using a linear stage while imaging with 360° rotation by the motor. The motor was selected considering various requirements, such as torque, rotational speed, and gear ratio of pulleys. An ex vivo rabbit tracheal model was used as a sample, and the sample and catheter were immobilized by acrylic structures. The OCT images provided information about the structures of the mucosa and submucosa. The difference between normal and stenosed parts in the trachea was confirmed by OCT. Furthermore, through a three-dimensional (3-D) reconstruction process, it was possible to identify and diagnose the stenosis in the 3-D image of the airway, as well as the cross-sectional image. This study would be useful not only for diagnosing airway stenosis, but also for realizing 3-D imaging.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.135-144
• /
• 2006

Implicit surface model is convenient for modeling objects composed of complicated surfaces such as characters and liquids. Moreover, it can express various forms of surface using a relatively small amount of data. In addition, it can represent both the surface and the volume of objects. Therefore, the modeling technique can be applied efficiently to deformation of objects and 3D animation. However, the existing implicit primitives are parallel to the axis or symmetrical with respect to the axes. Thus it is not easy to use them in modeling objects with various forms of motions. In this paper, we propose an efficient animation method for modeling various poses of characters according to matching with motion capture data by adding the attribute of rotation to metacube which is one of the implicit primitives.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.31-36
• /
• 2006

By analyzing the Ge 34 core-level photoelectron spectrum, we studied the structure of the $Li/Ge(111)-3\times1$ surface. Two surface related components tying on either side of the main bulk peak were identified in the Ge 3d spectrum. The existence and the position of the two surface components in the core-level spectrum from $Li/Ge(111)-3\times1$ is similar to those of the $Li/Ge(111)-3\times1$, suggesting the similarities in structure of the two surfaces. The core-level photoelectron spectra of the Li-induced $Li/Ge(111)-3\times1$ surface are well consistent with the honeycomb-chain-channel model, which was proposed as the structure of the $Si/Ge(111)-3\times1$ induced by alkali metals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1363-1368
• /
• 2011

This paper describes an analysis on the granular noise in pixel-to-pixel mapping-based computational integral imaging. The pixel mapping-based method provides a high-resolution reconstructed images and also its computational cost is very lower than the previous back-projection-based method. In this paper, a signal model for the pixel mapping-based method is introduced, which defines and analyzes the granular noise. Computer experiments provides the granular noise properties based on the proposed signal model. The experimental results indicates that the granular noise pattern differs from that of the back-projection based method. The results is also utilized in the pixel mapping-based method.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.2
• /
• pp.1-9
• /
• 2001

본 논문은 여러 장의 이미지로부터 삼차원 모델을 빠르게 복원하기 위한 다각형 기반 Space Carving 알고리즘을 제안한다. 본 논문에서 제안하는 알고리즘은 기존의 복셀 carving 연산에 다각형 carving 연산을 추가하여 기존 복셀 carving 기법의 단점인 렌더링 품질의 저하와 느린 렌더링 속도 문제를 보완하였다. 따라서 복원된 모델은 다각형 구조를 가지며, 이로부터 텍스쳐 매핑을 이용한 빠른 속도의 고품질 렌더링 기법이 가능해진다. 또한 다각형 carving 후잉여 데이터를 삭제함으로써 복원된 모델의 품질 저하없이 메모리를 줄이고, 더욱 빠른 렌더링을 가능하게 한다.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.149-156
• /
• 2003

In the latest medical world, the attempt of reconstructing anatomical human body system using computer graphics technology awakes people's interests. Actually, this trial has been made in dentistry too. There are a lot of practicable technology fields using computer graphics in dentistry For example, 3D visualization and measurement of dental data, detection of implant location, surface reconstruction for restoring artificial teeth in prostheses and relocation of teeth in orthodontics can be applied. In this paper, we propose methods for definitely detecting the geometric features of teeth such as cusp, ridge, fissure and pit, which have been used as most important characteristics in dental applications. The proposed methods are based on the approximate curvatures that are measured on a 3D tooth model made by scanning an impression. We also give examples of the geometric features detected by using the proposed methods. Comparing to other traditional methods visually, the methods are very useful in detecting more accurate geometric features.

• Journal of Korea Water Resources Association
• /
• v.41 no.1
• /
• pp.65-74
• /
• 2008

The small and medium sized dams have the fill dam type of a lot of occasions, which are often weak in cases of major floods. For this reason, although a countermeasure is in great need, due to the importance of the facilities and financial situations, no direct safety measures have been taken. In this study, in order to minimize construction expenditure for practical safety measures in cases of major floods, the overflow section of spillway has been analyzed focusing on how the overflow capacity will increase in the case of partially rebuilding a part of the overflow section of spillway favorable for hydraulic conditions. The Labyrinth weir and movable weir was chosen for reconstruction models of the overflow section. Moreover, for analyzing the after-effects of the reconstruction, a small scale dam was temporarily chosen for various experiments such as the hydraulic model testing and the three dimension numerical evaluation through the use of Flow-3D.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.299-310
• /
• 2009

In this paper, we proposed a new method to correct the zoom lens distortion for the video sequence captured by the zoom lens. First, we defined the nonlinear zoom lens distortion model which is represented by the focal length and the lens distortion using the characteristic that lens distortion parameters are nonlinearly and monotonically changed while the focal length is increased. Then, we chose some sample images from the video sequence and estimated a focal length and a lens distortion parameter for each sample image. Using these estimated parameters, we were able to optimize the zoom lens distortion model. Once the zoom lens distortion model was obtained, lens distortion parameters of other images were able to be computed as their focal lengths were input. The proposed method has been made experiments with many real images and videos. As a result, accurate distortion parameters were estimated from the zoom lens distortion model and distorted images were well corrected without any visual artifacts.