• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.893-899
• /
• 2000

본 논문에서는 0.65 $\mu$m CMOS 공정을 이용한 900MHz 대역의 저잡음 증폭기를 설계하였다. 입력 매칭은 전력소모가 가정 적고 NF도 가장 작은 인덕터 종단 정합회로를 사용하였다. 온칩 상에 바이어스 안정화를 포한시켰으며, 전원은 3V를 공급하였을 때 전력 소모는 39mW이다. 설계된 저잡음 증폭기의 특성능 900MHz 대역에서 13.2dB의 이득과 4.8dB의 Noise Figure가 측정이 되었다. 입력 반사손실으 -26dB, 츨력반사 손실은 -17dB을 얻었으며, 입력 1-dB 억압 -12dBm을 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.873-876
• /
• 2005

A low noise amplifier(LNA) using electro-magnetic field simulator is designed in standard 0.25um CMOS process. Integrated spiral inductor is simulated using EM field solver. Then LNA is simulated with active device, capacitor and simulated inductor by EM field solver. A S11 and S21 of -15.45dB and 17.8dB at 2.3GHz as simulation results was achieved. A Noise Figure is 2.92dB. And Measurements show a S11 and S21 of -12.4dB and 17.8dB at 2.3GHz. A Noise Figure of 3.3dB was achieved.

• 전자공학회논문지 IE
• /
• 제45권2호
• /
• pp.1-5
• /
• 2008

본 연구에서는 SOI MOSFET를 hot carrier 현상에 의한 RF 성능 저하를 측정 분석하였다. $V_{GS}=0.8V$, f=2.5GHz에서 설계되어 진 LNA의 이득은 16.51dB이고 잡음지수는 1.195dB였다. SOI에서 스트레스 후에는 LNA의 이득과 잡음지수가 스트레스전보다 각각 15.3dB, 1.44dB로 변화하였다.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.188-198
• /
• 2018

In this study, we propose an approach for the design and satisfy the requirements of the fabrication of a small, lightweight, reliable, and stable ultra-wideband receiver for millimeter-wave bands and the contents of the approach. In this paper, we designed and fabricated a stable receiver with having low noise figure, flat gain characteristics, and low noise characteristics, suitable for millimeter-wave bands. The method uses the chip-and-wire process for the assembly and operation of a bare MMIC device. In order to compensate for the mismatch between the components used in the receiver, an amplifier, mixer, multiplier, and filter suitable for wideband frequency characteristics were designed and applied to the receiver. To improve the low frequency and narrow bandwidth of existing products, mathematical modeling of the wideband receiver was performed and based on this spurious signals generated from complex local oscillation signals were designed so as not to affect the RF path. In the ultra-wideband receiver, the gain was between 22.2 dB and 28.5 dB at Band A (input frequency, 18-26 GHz) with a flatness of approximately 6.3 dB, while the gain was between 21.9 dB and 26.0 dB at Band B (input frequency, 26-40 GHz) with a flatness of approximately 4.1 dB. The measured value of the noise figure at Band A was 7.92 dB and the maximum value of noise figure, measured at Band B was 8.58 dB. The leakage signal of the local oscillator (LO) was -97.3 dBm and -90 dBm at the 33 GHz and 44 GHz path, respectively. Measurement was made at the 15 GHz IF output of band A (LO, 33 GHz) and the suppression characteristic obtained through the measurement was approximately 30 dBc.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1092-1094
• /
• 2009

The purpose of the research was to figure out the optimal binocular parallax inducing the least 3D visual fatigue. Subjective 3D visual fatigue was measured while the revolution depth and the average depth of an object were manipulated. The optimal binocular parallax was figured out by using data fitting method.

• 한국컴퓨터그래픽스학회논문지
• /
• 제21권3호
• /
• pp.11-16
• /
• 2015

본 논문은 3D 프린팅을 위한 3D 개인 피규어 생성 및 콘텐츠 인지 기반 피규어 변형, 조합 시스템을 제안한다. 3D 객체의 3D 프린팅을 위해서는 적층가공 기법의 슬라이싱시에 무결성이 보장되어야 하며, 프린터 종류에 따라 객체의 내부를 비우는 등의 제약 조건이 따른다. 본 논문은 3D로 복원된 자신의 얼굴을 적용한 개인 피규어를 자동 생성하는 기술과 생성된 3D 개인 피규어의 고유 기능을 유지하고 성공적인 3D 프린팅을 보장하는 콘텐츠 인지 기반 외형 변형, 두께 조정, 조합 기술을 소개한다. 기존 전문가들이나 숙련된 디자이너만 쓸 수 있었던 3D 저작도구에 비해 간단한 조작으로 다양한 외형 변형, 두께 조정, 모델 조합 등이 가능하다.

• 한국전자파학회논문지
• /
• 제22권1호
• /
• pp.76-80
• /
• 2011

본 논문에서는 3~5 GHz의 동작 주파수를 가지는 0.18-${\mu}m$ CMOS 저전력/광대역 저잡음 증폭기 구조를 제안한다. 제안하는 광대역 저잡음 증폭기는 광대역 입력 정합, 발룬 기능, 그리고 우수한 노이즈 특성을 얻기 위해 노이즈 제거 회로 구조를 채택하였다. 특히, 2차 LC-대역 통과 필터를 증폭기의 부하로 구현함으로써 기존에 발표된 문헌들보다 최소 전력을 소모하면서 높은 전력 이득과 낮은 잡음 지수를 얻을 수 있었다. 본 논문에서 제안하는 저잡음 증폭기는 1.8 V 공급 전압으로부터 단지 3.94 mA의 전류를 소모하며, 모의 실험 결과, 3~5 GHz UWB 대역에서 전력 이득은 최소 +17 dB 이상, 잡음 지수는 최대 +4 dB 이하, 그리고 입력 IP3는 -15.5 dBm을 가진다.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.825-832
• /
• 2011

In this paper, we described the design and measurement results of a Front-End Receiver for S-band active phased array radar. The Front-End Receiver has input P1dB of -4dBm and IIP3 of 7dBm. The measurement results show that gain is $24{\pm}0.7dB$, noise figure are less than 2.3dB over the frequency range of $fc{\pm}0.2GHz$. The Front-End Receiver can protect the receiver path from large input signals with a maximum peak power of multi-kW and recovery time is less than 0.8us. The measurement results satisfy all specifications.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.7-13
• /
• 1997

A X-band 3-stage monolithic LNA (low noise amplifier) with series feedback has been successfully desined and demonstrated by suign 0.5-$\mu\textrm{m}$ GaAs MESFET. In the design of the 3-stage LNA, the effects of series feedback to the noise figure, the gain, and the stability have been investigated ot find the optimal short stub length. As a result, the inductive series feedback topology which has 10degree short stub in the GaAs MESFET source lead, has been employed in the 1-st stage. The fabricated MMIC LNA's chip size is only 1mm$^{2}$/stage, which is smaller than the previously reported X-band MMIC input/output return losses are less than -10dB and -15dB, respectively. The noise figure (NF) is less than 2.6dB. The measured data show good agreement with the simulated values.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.621-624
• /
• 2003

In this paper, two Cascode Low Noise Variable Gain Amplifiers are proposed for wide dynamic range and constant Noise Figure for frequency range of 2.4GHz. Designed Variable Gain Low Noise Amplifier are for Wireless Local Area Network (WLAN) applications. A gain is higher than 17dB and the noise figure is approximately 1.3dB and the input VSWR is better than 2:1.