• 대기
• /
• 제32권1호
• /
• pp.1-15
• /
• 2022

Recently, Japan's Meteorological Research Institute presented the d4PDF database (Database for Policy Decision-Making for Future Climate Change, d4PDF) through large-scale climate ensemble simulations to overcome uncertainty arising from variability when the general circulation model represents extreme-scale precipitation. In this study, the change of precipitation characteristics between the historical and future climate conditions in the Yongdam-dam basin was analyzed using the d4PDF data. The result shows that annual mean precipitation and seasonal mean precipitation increased by more than 10% in future climate conditions. This study also performed an analysis on the change of the return period rainfall. The annual maximum daily rainfall was extracted for each climatic condition, and the rainfall with each return period was estimated. In this process, we represent the extreme-scale rainfall corresponding to a very long return period without any statistical model and method as the d4PDF provides rainfall data during 3,000 years for historical climate conditions and during 5,400 years for future climate conditions. The rainfall with a 50-year return period under future climate conditions exceeded the rainfall with a 100-year return period under historical climate conditions. Consequently, in future climate conditions, the magnitude of rainfall increased at the same return period and, the return period decreased at the same magnitude of rainfall. In this study, by using the d4PDF data, it was possible to analyze the change in extreme magnitude of rainfall.

• 한국물환경학회지
• /
• 제30권1호
• /
• pp.31-43
• /
• 2014

Recently, Andong Reservoir and Imha Reservoir located in Nakdong River basin (Korea) are being connected by a tunnel (length 2km, diameter 5.5m) for a conjunctive use. The objectives of this study were to construct a two dimensional(2D) laterally-averaged model for two reservoirs, and examine the effects of connection on the water transportation and temperature stratification in the reservoirs. The 2D models for each reservoir were calibrated using field data obtained in 2006, and applied to the linked system for the year of 2002 when a severe flood intruded into Imha Reservoir during the typhoon Rusa. Simulation results showed that 364 million $m^3$ of water can be conveyed from Imha to Andong, while 291 million $m^3$ of water from Andong to Imha after connection. It resulted in 1.38 m increase of annual averaged water level in Andong Reservoir, whereas 3.75 m decrease in Imha Reservoir. The structures of thermal stratification in both reservoirs were influenced in line with the flow exchanges. In Andong Reservoir, the location of thermocline moved upward about 10 m compared to an independent operation. The results imply that the persistent turbidity issue of Imha Reservoir might be shifted to Andong Reservoir during a severe flood event after connection.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.207-207
• /
• 2021

The Vietnamese Mekong Delta(VMD) covers an area of 62,250 km² in the lowest basin of the Mekong Delta where more than half of the country's total rice production takes place. In 2016, an estimated 1.29 million tonnes of Vietnam's rice were lost to the country's biggest drought in 90 year and particularly in VMD, at least 221,000 hectares of rice paddies were hit by the drought and related saltwater intrusion from the South China Sea. In this study, 3D numerical simulations using Delft3D hydrodynamic models with calibration and validation process were performed to examine flow characteristics, climate change scenarios, water level changes, and salinity concentrations in the nine major estuaries and coastal zones of VMD during the 21^st century. The river flows and their interactions with ocean currents were modeled by Delft3D and since the water levels and saltwater intrusion in the area are sensitive to the climate conditions and upstream dam operations, the hydrodynamic models considered discharges from the dams and climate data provided by the Coupled Model Intercomparison Project Phase 6(CMIP6). The models were calibrated and verified using observational water levels, salinity distribution, and climate change data and scenarios. The results agreed well with the observed data during calibration and validation periods. The calibrated models will be used to make predictions about the future salinity intrusion events, focusing on the impacts of sea level rise due to global warming and weather elements.

• Ocean and Polar Research
• /
• 제27권1호
• /
• pp.35-44
• /
• 2005

The bathymetric and gravity data were obtained in 2001 and 2003 during a survey of seamounts in the northwest of the Marshall Islands, western Pacific. The study areas are located in the Pigafetta Basin which is the oldest part of the Pacific plate and in the Ogasawara Fracture Zone which formed from the spreading ridge between the Izanagi and Pacific plates in the Jurassic. The densities of seamounts and the elastic thickness values of the lithosphere are calculated by using three-dimensional flexure modeling considering the constant sediment layer in the infinite plate model. Very low elastic thickness values (5km), relatively young seamounts, and old lithosphere in the east study area suggest the possibility of the rejuvenation of lithosphere by widespread volcanisms, whereas the elastic thickness values (15km), relatively old seamounts, and young lithosphere of the west study area are suitable for a simple cooling plate model of $300-600^{\circ}C$ isotherm. The gravity residuals of OSM6-1 and OSM6-2 suggest the possibility of different load density or elastic thickness. Relatively older OSM6-2 formed on the younger lithosphere with relatively thin elastic thickness, while younger OSM6-1 on the older lithosphere with relatively thick elastic thickness.

• 한국방재안전학회논문집
• /
• 제13권2호
• /
• pp.53-63
• /
• 2020

본 연구에서는 2차원 흐름 해석 모형인 Hydro_AS-2D 모형을 이용하여 해수면 상승과 극한 홍수 발생 시 창원시 성산구 및 의창구 일대의 침수피해 상황을 모의하고, 그 결과를 3차원 지형 상에 표출한 후 BIM 기술을 이용하여 최적 대피경로를 도출하였다. 기후변화는 홍수재해 측면에서 크게 두 가지 요소에 영향을 미치는데 해수면 상승과 극한 강우사상의 증가이다. 해수면 상승은 그 자체만으로 연안지역에 해수가 범람하여 침수현상을 유발하는 영향을 미칠 수 있을 뿐 아니라 하천의 기점 홍수위를 상승시켜 하천 전체에 걸쳐 홍수위 상승을 유발한다. 본 연구에서는 기후변화에 의한 해수위 상승과 태풍에 의한 폭풍해일에 의한 해수위 상승, 그리고 태풍에 의한 극한 강우사상을 모의조건으로 설정하였다. 창원시의 지형공간정보와 하천정비기본계획의 하천횡단 정보를 이용하여 유역전체의 3차원 공간정보로 구성하고 이를 수치모형화 하였다. 연구대상지역은 BIM 기술을 이용하여 3차원 지형정보 상에 건물의 층고, 대피소 위치 등의 정보를 가지고 있는 3차원 도시정보모델로 구축하였으며, 수치모의 결과를 이 모델 상에 표출하고 대피계획을 위한 분석에 사용하였다. 침수발생 시 대피경로는 시간에 따른 침수 범위의 변화에 따라 대피소로의 경로를 설정하는 알고리즘에 의해 결정되며, 설정된 경로는 직관적인 3차원 공간정보 상에 표출되어 사용자에게 제공된다.

• 한국해양공학회지
• /
• 제27권3호
• /
• pp.29-35
• /
• 2013

The exploration areas for maritime resources such as oil and natural gas have gradually moved to deep sea areas. It has become difficult to use existing fixed marine structures, which are very costly to build, because that have reached the uppermost economic limit. Therefore, floating marine structures and flexible marine structures are preferred. In particular, slender bodies such as risers and pipes are important parts of ocean depth marine structures. These slender bodies have more flexible structural characteristics in deep water areas because their overall length becomes longer and thediameter/length slenderness ratio gets smaller. In addition, the dynamic behavior of slender bodies becomes complicated as external forces such as tides and waves act on it directly. In this study, in order to solve these problems, we performed model tests in a 2-D wave basin using flexible slender bodies with different modulus of elasticity values. As a result, we compiled statistics and compared the behaviors of flexible slender bodies with respect to the effect of the modulus of elasticity. We expect that the results could be used as reference data for the design of structures with flexible elements.

• 한국물환경학회지
• /
• 제34권3호
• /
• pp.308-315
• /
• 2018

SWMM-LID was calibrated with flow monitoring data in LHI to evaluate runoff after LID application. The flow rate in the B basin was estimated to be 0.94 and 6.15 for O/S and $D_v$, respectively. In the A and C basins, the difference between the observed and simulated data was greater than in the B basin. As a result of runoff reduction efficiency by the application of LID facilities, the change of infiltration increased from 34.6 % to 45.8 % in the entire watershed, and the runoff decreased from 58.8 % to 46.3 %. In the runoff reduction of each LID facility, rain garden E showed the highest effect with 99.9 % and bioretention B showed the lowest effect with 27.5 %. In order to evaluate the efficiency of each LID facility, a comparison is made between the pore volume (V) of the LID and the catchment area (A). The runoff showed a runoff reduction effect of about 70 % above the 0.1 volume/area (V/A) value. As a result of examining the runoff reduction with LID facilities by the LID module of SWMM, a reasonable design is possible by reflecting the appropriate LID volume to drainage area.

• 자원환경지질
• /
• 제32권4호
• /
• pp.379-384
• /
• 1999

In order to know the characteristics of attenuation of coda wave in the Kyungsang Sedimetary Basin, quality faclity factor for coda wave (coda Q) is estimated from the earthquake data recorded in the KIGAM local seismic network. Thesingle scattering model for coda wave generation is adopted is adopted in estimating coda Q. In the present study, coda Q(Qc)is estimated in the range of $\alpha$=1.5~3.0, where $\alpha$ denotes the normalized time to S-wave travel time and expressed in terms of frequency (f). The deduced function in the range of 1 to 25 Hz is Qc=36.8283$f^{1.15095}$ which represents the strong dependence of coda Q on frequency. It is found that the difference of Qc between U-D, N-S, and E-W components is negligible. This fact suports the back scattering therory that coda wave originates from scattered waves by randomly distributed heterogenities in the crust On the other hand, it is observed that the coda Q increases with increasing epicentral distence. This observation suggests that QC increases with depth.

• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 1999년도 제6차 학술발표회 발표논문집
• /
• pp.2-16
• /
• 1999

This study includes structural analysis of the northern Pattani Basin, areal description of depositional facies, and their spatial relationships using 3-D seismic and well data. Well log data indicate that the representative depositional facies of the studied intervals are sandy, fluvial, channel-fill facies encased in shaly floodplain deposits. Seismic responses were predicted from a synthetic seismogram using a model of dominant depositional facies. Peak-to-trough amplitude and instantaneous frequency seismic attributes are used in depositional facies interpretation. Three Intervals A, B and C are interpreted on the successive stratal surfaces. The shallowest interval, A, is the Quaternary transgressive succession. Each stratal surface showed flow pattern variation of fluvial channel facies. Two transgressive cycles were identified in interval A. Interval B also indicated fluvial facies. Depositional facies architectures are described by interpreting seismic attributes on the successive stratal surfaces.

• 한국수자원학회논문집
• /
• 제45권3호
• /
• pp.301-316
• /
• 2012

본 연구에서는 한강수계 팔당댐 상류의 자연유출량에 대해 기존의 연구 결과를 바탕으로 TANK 모형 결과와 SWAT 모형결과를 비교함으로써, 기존 TANK 모형이 가지고 있는 한계및 문제점을 현실적으로 제시하고, 향후 SWAT 모형의 적용성 및 활용에 대해 검토하였다. TANK 모형의 매개변수 최적화가 이루어진 보정유역들(충주댐 및 소양강댐)의 모의결과를 볼 때 두 모형 모두 모형효율 0.8 이상의 높은 정도의 모의가 가능한 것으로 나타났으며, 첨두유량이 발생하는 홍수기에는 TANK의 결과가 SWAT보다 관측치에 근접하는 것으로 나타났다. 그러나 TANK 모형의 경우 주로 평수기 이상의 유량을 대상으로 보정을 수행하여 갈수기에 관측유량과 많은 차이를 보였으며, 특히 일정 유량 이하로 모의되지 않는 한계를 나타내었다. 반면, SWAT 모형은 일부 홍수사상을 제외하고 대체로 관측치의 경향을 잘 따르고 있으며, 유역 최종 출구인 팔당댐(한강F)에서의 상류댐 방류량을 고려한 모의유입량이 실제 관측유입량과 잘 일치하는 것으로 나타나(모형효율 0.9 수준), 댐 방류량과 인위적인 용수 수요가 없는 상태의 자연유출량의 추정이나 댐개발 전후에 따른 유량변동 평가 등에 있어 매우 높은 신뢰성을 보장하는 것으로 판단되었다. 아울러, TANK 모형의 최적화된 매개변수를 전이시켜 이용하는 대상유역들(평창A, 달천B, 섬강B, 인북A, 한강D, 홍천A)에 대한 결과를 SWAT 모형 결과와 비교할 때, 일부 홍수기를 제외하고는 평수기 이하에서 매우 불안정한 모의 결과를 나타내었으며, 보정유역들에 대한 결과와 마찬가지로 갈수기에 일정 유량이하로 모의되지 않는 문제가 나타났다. 이는 수자원 계획 및 관리의중요한 지표인 갈수량의 산정에 있어 TANK 모형의 적용에 많은 불확실성이 있음을 보여준다. 따라서 복잡 다양한 국내 유역의 특성을 보다 현실적으로 반영하고, 향후 유역내 도시화 등에 따른 토지이용 및 용수이용의 변화, 기후변화 등에 따른 수자원 계획 및 관리에 효율적으로 대처하기 위해서는 TANK와 같은 기존의 개념적 집중형 모형보다는 SWAT과 같은 물리적 기반의 유역모형 적용이 필요할 것으로 판단된다.