• 한국통신학회논문지
• /
• 제32권12C호
• /
• pp.1194-1202
• /
• 2007

본 논문에서는 쾌속조형시스템(Rapid Prototyping System)에 적용 가능한 블라인드 워터마킹 알고리즘을 제안한다. 3차원 메쉬 모델은 쾌속조형시스템의 시제품 제작 전 단계인 CAD 모델링 단계에서 사용된다. STL 형태의 메쉬 모델을 이용하여 제작할 시제품의 오류를 확인하고 수정하여 정밀도를 높이고 데이터의 오류를 줄인다. 모델링 단계의 메쉬 모델 오류는 시제품의 정밀도와 직접 연결되기 때문에 시제품 제작 전 단계에서는 이동, 회전과 같은 모델의 형태를 변형시키지 않는 변환은 사용하지만 데시메이션, 평활화 등의 변환은 사용되지 않는다. 기존의 대부분 워터마킹 알고리즘은 모델에 특정 노이즈를 추가하는 방법으로 워터마크 정보를 표현한다. 이런 알고리즘은 쾌속조형시스템에 사용할 경우 시제품의 정밀도를 저하시키기 때문에 사용이 극히 제한적이다. 제안한 알고리즘은 워터마크 삽입 전후 모델의 형태가 변하지 않으며 쾌속조형시스템과 같은 고정밀도를 요구하는 기계공학 분야에서 제작자 정보의 표현, 데이터의 무결성 인증 등 목적으로 사용할 수 있으며, 가상현실 등 다른 분야에서는 정보은닉 용도로도 사용할 수 있다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권5호
• /
• pp.276-284
• /
• 2019

Objectives: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. Materials and Methods: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. Results: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups ($2.6{\pm}1.3days$), while the RP group required the least number of days to reach an 80% recovery rate ($7.8{\pm}2.2days$). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. Conclusion: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.14-19
• /
• 2007

Rapid prototyping (RP) technology can fabricate any 3D physical model regardless of geometric complexity using the layered manufacturing (LM) process. Stereolithography (SL) is the best-known example of RP technology. In general, the surface quality of a raw SL-generated part is unsatisfactory for industrial purposes due to the step artefact created by the LM process. Despite of the increased number of applications for SL parts, this side effect limits their uses. In order to improve their surface quality, additional post-machining finishing, such as traditional grinding, is required, but post-machining is time consuming and can reduce the geometric accuracy of a part. Therefore, this study proposes a post-machining technology combining coating and grinding processes to improve the surface quality of SL parts. Paraffin wax and pulp are used as the coating and grinding materials. By grinding the coating wax only up to the boundary of the part, the surface smoothness can be improved without damaging the surface. Finally, moulding and casting experiments were performed to confirm the suitability of the SL parts finished using the proposed process with rapid tooling (RT) techniques.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.111-116
• /
• 2008

A piperazinylalkylisoxazole library containing 86 compounds was constructed and evaluated for the binding affinities to dopamine (D3) and serotonin (5-HT2A/2C) receptor to develop antipsychotics. Dopamine antagonists (DA) showing selectivity for D3 receptor over the D2 receptor, serotonin antagonists (SA), and serotonin-dopamine dual antagonists (SDA) were identified based on their binding affinity and selectivity. The analogues were divided into three groups of 7 DAs (D3), 33 SAs (5-HT2A/2C), and 46 SDAs (D3 and 5-HT2A/2C). A classification model was generated for identifying structural characteristics of those antagonists with different affinity profiles. On the basis of the results from our previous study, we conducted the generation of the decision trees by the recursive-partitioning (RP) method using Cerius2 2D descriptors, and identified and interpreted the descriptors that discriminate in-house antipsychotic compounds.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.55-58
• /
• 2008

산업 제품을 디자인하는 디자이너들은 CAD(Computer Aided Design)과 같은 방법을 사용하여 새로운 디자인을 만들어내고, 이를 적용한 가상의 3D 모델을 통해 살펴본다. 이 방법은 직접 손으로 도면을 그리고 단순히 한쪽 면만 살펴볼 수 있었던 기존의 방법에 비해서 컴퓨터로 인한 자동화와 다양한 각도에서 제품에 적용된 새로운 디자인을 살펴봄으로써 시간과 비용을 절감할 수 있다. 이에 우리는 앞서 언급한 디자인 방법에 Augmented Reality와 Rapid Prototyping의 개념을 더해 현실적이고 인터랙티브한 산업제품의 디자인 방법을 고안하였다. 이것은 스티로폼과 같은 재질로 만들어진 mockup을 조립하여 만들고, 3D 모델의 컬러, 재질, 버튼 등의 인터페이스 요소와 실제 제품을 조작하는 것과 같은 인터랙티브한 요소들을 적용시킴으로써 제품을 디자인할 수 있는 증강현실기반 시스템이다.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.32-36
• /
• 2014

Reconstruction of the maxilla is quite a difficult challenge for reconstructive surgeons. The maxilla is the most important part of the midface, which contributes to facial esthetics, mastication, swallowing, speech, supporting orbital contents and sinus function. Free fibular flap is most versatile to reconstruct jaw bone because of its adequate length, containing both soft and bony tissues and acceptance of dental implants. In this case report, a reconstruction of the maxilla using free fibular flap and dental implants is described in which rapid prototype was used before surgery to simulate the final prosthetic results.

• Journal of International Society for Simulation Surgery
• /
• 제4권1호
• /
• pp.13-16
• /
• 2017

Fibular free flap reconstruction is the flap of the choice in long-span mandibular bone reconstruction. The most common disadvantage of the fibular flap is short bone height to install dental implant. Double barrel fibular flap has been tried, however, bulky flap in the oral cavity hinder its use. Titanium reconstruction plate has been used simultaneously with the free fibular flap to stabilize occlusion and to fix the fibular flap. In this study, titanium reconstruction plate was fixed in the lower border of the mandible and the fibular free flap was fixed in the superior border of the titanium plate to improve implant-crown ratio. This new technique improved the longevity of the dental prosthodontics with dental implants.

• 대한구순구개열학회지
• /
• 제6권2호
• /
• pp.91-105
• /
• 2003

There are significant limitations in the precision of mandibular distraction in setting a desired occlusal and facial esthetic outcome. The purpose of this study is to present the simulation method for the distraction osteogenesis treatment planning. 3-D surgery simulation software programs V-works and V-Surgery(Cybermed, Seoul, Korea) were used from the 3D CT data in addition to the conventional data facial photography, panorama and cephalogram, dental cast model. We have utilized already for the various surgical procedures to get information preoperatively for the maxillofacial surgery like cancer localization and reconstructive surgery, orthognathic surgery and implant surgery in the department of Oral and Maxillofacial surgery, Seoul National University Hospital. On the software, bone cutting can be done at any place and any direction. Separated bone segment can be mobilized in all 3 dimensional direction. After the 3D simulation on the software program, mock surgery on the RP model can be performed. This planning method was applied to two hemifacial microsomia patients. With this protocol, we could simulate the movement of bony segment after maxillofacial distraction osteogenesis

• 감성과학
• /
• 제22권3호
• /
• pp.3-20
• /
• 2019

가상현실 기술이 발전하면서 다양한 영역에서 여러 목적으로 활용되고 있다. 하지만 사용자로부터 메스꺼움, 어지러움 등과 같은 멀미 증상에 대한 부작용도 함께 보고되고 있다. 이런 멀미 증상을 사이버멀미라고 말하며, 사용자에게 불편을 야기시켜 불쾌감과 스트레스와 같은 부정적 영향을 줄 수 있으며, 현재 사이버멀미의 발생 원인과 해결책에 관한 공식적인 표준이 없다. 본 연구에서는 이런 한계점을 극복하기 위해 정량적, 객관적 사이버멀미 평가법을 제안하였다. 10명의 20대 남성 대상으로 이동과 회전을 하는 가상현실을 경험하게 하면서 128채널의 뇌파를 측정하였다. 11개 영역에서 Delta와 Alpha 상대 파워를 계산하고, ROC curve를 통해 area under the ROC curve (AUC)가 가장 높은 값을 가지는 다중회귀모형을 도출하였다. 이렇게 도출한 다중회귀모형은 11개의 설명변수로 피험자가 응답한 사이버멀미의 정도와 비교하여 95.1 % (AUC = 0.951)의 정확성으로 사이버멀미를 구분하는 것이 가능함을 알 수 있었다. 이러한 결과를 정리하면 본 연구에서는 128 채널의 뇌파를 통해 멀미에 대한 객관적 반응을 확인하였으며, 뇌의 특정부위에서 반응이 있는 것으로 나타났다. 본 연구 결과와 분석법을 활용하면 추후 사이버멀미 관련 연구에 도움이 될 수 있을 것으로 기대된다.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.88-92
• /
• 2006

Large-scale model tests of welded topside joints were carried out to observe the fatigue behavior of API 2W Gr.50 steel produced by POSCO. The fatigue crack behaviors for various loading conditions were measured and investigated around the critical joint sections. The experimental results have been verified with numerical approaches and also compared with the AWS D1.1 and DnV RP-C203 design curves. The large-scale experiment models were fabricated, based on the actual operating east area fixed platform. The dimensions of the models were slightly modified to accommodate the test facilities and capacities. The fatigue test was carried out having ${\Delta}Q$ of T1=705.6kN, T2=749.7kN and T3=793.8kN. The three specimens were statically loaded 20 times, with various loadings of about 50kN intervalsbetween the maximum and minimum loads required in the fatigue tests. This loading removed the residual stress in the specimen before the fatigue tests. The topside joint crack was initiated from the brace heel, where the maximum tensile stress occurred. The API 2W Gr.50 steel satisfied the AWS D1.1 detail category C and DnV RP-C203 detail category F ${\Delta}S-N$ curve.