• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.1-27
• /
• 2019

In recent years, space planning ability using 3D sketch software is required in the working field of interior design. However, vocational high school do not respond appropriately to changes in the industry, because the class of vocational high school consists of hands-on practical classes and 2D CAD based classes. There is a shortage of 3D sketch software-based instruction programs that can improve students' spatial planning skills. Therefore, this study is to develop instruction program using 3D sketch software for 'Planning for Residential Space' unit of NCS-based on interior design subject and to find out the effect on students' academic achievement by applying to vocational high school class. The 3d sketch software based instructional program developed in this study was developed through four stages of preparation, development, implementation and evaluation according to the PDIE model process. The experimental design model used nonequivalent group posttest-only design in this study. Experiments were conducted on vocational high school students in construction and 9 hours of interior design subjects were applied. After the experiments, students were tested for academic achievement in the cognitive, affective, and psychomotor areas. As a result, the instruction program using the 3d sketch program developed in this study was found to be more effective in improving students' academic achievement than existing manual instruction program in both cognitive, affective, and psychomotor areas.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.34-41
• /
• 2022

Recently, digital technology and computer-aided design/computer-aided manufacturing (CAD/CAM) environment have changed the clinician treatment method in the fabrication of dentures. The denture manufacturing method with CAD/CAM technology simplifies the treatment and laboratory process to reduce the occurrence of errors and provides clinical efficiency and convenience. In this case, complete dentures were fabricated using stereolithography (SLA)-based 3D printing in patient with mandibular deviation. Recording base were produced in a digital model obtained with an intraoral scanner, and after recording a jaw relation in the occlusal rim, a definitive impression was obtained with polyvinyl siloxane impression material. In addition, facial scan data with occlusal rim was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a Food and Drug Administration (FDA)-approved liquid photocurable resin. The denture showed adequate retention, support and stability, and results were satisfied functionally and aesthetically.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.163-166
• /
• 2009

All sorts of technique for schedule progress management is being developed recently, These can change and develop the abstractive concept model to a detailed model that describes the visual 3D image about a schedule plan. but, this technique is troublesome, because this requires the handwork by means of connection between 3D-CAD and scheduling Program. In this study, the process of real-time schedule progress control system using the integrated database by 3D-CAD object information system and schedule module is presented. This study present the process of a schedule progress management using UML, and the process of real-time schedule progress management using RFID system. Through this study, we want to realize the rapid generation of estimated schedule information and to simulate and analyze actual schedule information by real-time.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.117-124
• /
• 2012

The importance of the digital architecture is increasing more ever. Currently, CAD and 3D programs are used as design fields, but the BIM (building information modeling) is gradually interested. BIM is mandatory on the project more than 50 billion won ordered by the government since 2012, it will be expanded to a total of government orders by 2016. University needs to evaluate teaching methods and computer-aided design environments such as CAD and BIM. In this paper, we surveyed computer-aided design environments and teaching methods for 73 students at the J University of Department of architectural engineering. Main results are as follows: 1. Hardlock is uncomfortable but necessary program for the computer management. 2. The desk placement considering the behavior of the design students results in higher satisfaction. 3. Because a CAD subject was a difficult course content and progress is fast, students thought it is difficult to follow. Especially, first-year students answered it is difficult to learn program and understand the structure of the building at the same time. 4. First-year students want to learn CAD more. Second-, third-, fourth-year students want to learn Photoshop more. Supplement for these classes is required. 5. Students answered that a teaching method of a CAD subject would be good to their own practice after the professor demonstrates for students. The senior's assistance is also a high effective way in the class. 6. During class, students' activities such surfing the web and Kakao Talk on a smartphone disrupt the class, there is a need to regulate by a rule such as disconnect computers from a network and against using smartphone. Although the Internet with the popularization of smartphones confers a benefit on modern life, it causes damage to us. This is a hard part for a salaried workers as well as students studying equally. The self management is required and a professor needs to control and restraint in a university classroom. The professor's continuing interest to students can increase the effectiveness of learning.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.3
• /
• pp.59-79
• /
• 2002

The purposes of the study were to present the optimum slacks pattern for elementary school girls and to compare and evaluate wearing ease of the slacks. 3D scans using the Cyberware PS motion platform were carried out for 3 subjects who have different body type. The automatic drafting method was programmed by AutoLISP in CAD. Wearing tests using 3D Scanner was done for evaluation of fitness of slacks. Regression analysis, analysis of variance and post-hoc test were performed for statistical analysis of the data by SPSS program. The procedure and results were as follows: The slacks construction components for pattern drafting were derived from 10 horizontal section maps obtained from 3D scans. The automatic drafting was based on the measurements of slacks construction components and the curve of crotch line. The crotch line was drafted using of the arc function in AutoCAD. The total crotch length was calculated using the multiple regression equation. Wearing test represented that the slacks pattern developed to accomodate individual body measurements was estimated more highly than existing patterns.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.15-22
• /
• 2002

A study is the selection of optimum forming condition for RP system. We develop the Automatic design program for machine element using visual LISP program in AutoCAD. Automatic design program reduces the required time for feedback between design and manufacturing of workpiece. Also we investigate the relationship between circularity of 3D solid model and circularity of rapid prototype using RP system and we will find optimum forming condition in RP system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.244-250
• /
• 2015

Survivability is avoidance and tolerance ability of combat systems for accomplishing mission in battle field. Therefore, the combat system has to protect or minimize any damage from threats. For this reason, many modeling and simulation based studies which analyze vulnerability of the combat system by threats, are in progress to improve survivability of the combat system. In this paper, we developed a 3D penetration analysis program for survivability analysis of combat system. To do this, we applied the penetration analysis equation to threat and protection performance of tank. Also we implemented simple tank models based on 3D CAD, and tested the developed program using the implemented tank models. As a result, we verified the developed program that is possible to analyze penetration by threat and protection performance of tank and to visualize its result, based on scenarios.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.59-66
• /
• 1989

The purpose of this study is to develop a personal computer aided 3-D geometric modeller. To perform this study, we set up a cube, cylinder, and a prism as primitives in the first segment of this study. By modelling the 3-D object through their transformation, addition, and subtraction, we proved the validity of the developed algorithm and its computer program. Some examples show the results of applying the program to model a few simple shapes of the machine parts. These results met the first aim of this study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.437-451
• /
• 2012

Application of 3D laser scanner to civil engineering is widely studied in various fields such as tunnel, bridge, calculation of earth volume, construction measurement, observation of rock joint, etc. Some studies on utilization of the 3D laser scanner for calculating the over-break and/or under-break of tunnels have also been carried out. However, in the previous research, the scanning data were usually compared with the 2D CAD blueprint results; although the shape of tunnel structure is relatively simple, for precise calculation of the over-break and/or under-break of tunnels, three-dimensional analysis based on BIM is needed. Therefore, in this paper, a new program that calculates the over-break and/or under-break of tunnels using the 3D laser scanner and the BIM is developed; moreover the effective and rapid process of data treatment is proposed. The accuracy of the developed program was verified by applying the new system to a real tunnels construction field.