• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.12-18
• /
• 1994

공학설계에 있어서 최적해를 얻기 위한 방법중의 하나로 최적화방법이 많이 사용되어 왔으나, 기존의 최적화방법에서는 설계점이 국부 최적점으로 빠져 들어갈 경우 그 영역을 벗어날 수 있는 방법이 없기 때문에, 최적화의 초기점을 달리하여 반복계산을 수행하여야 하는 불편한 점이 있었다. 유전적 알고리즘은 기존의 최적화방법에 비하여 다수의 설계점을 동시에 탐색하는 특성이 있어 국부 최적점에 빠질 가능성이 적은 반면, 계산시간이 많이 소요되고 전체 최적점 근처까지는 잘 수렴하나 정확한 최적점을 잘 찾지 못하는 한계가 있다. 본 연구에서는 유전적 알고리즘과 직접탐색법을 결합하여 이들의 단점을 보완한 즉, 전체 최적점을 보다 효율적으로 찾고 계산시간을 줄일 수 있는 방법을 제시하였다. 이 방법은 유전적 알고리즘을 이용하여 최적점이 존재하는 영역을 찾은 후에, 그 영역에서 직접탐색법을 이용하여 보다 정확한 최적점을 찾는 것으로, 예제를 통하여 제안된 방법의 유용성을 보였다.

• Journal of Nutrition and Health
• /
• 제35권3호
• /
• pp.394-401
• /
• 2002

The purpose of this study was to : (a) examine diabetic patients' sensory evaluation and food preferences, (b) analyze the portion sizes & plate wastes, (c) investigate the factors affecting plate wastes, and (d) determine the nutritional & mometary values of the plate wastes. A questionnaire for determining food preference and sensory evaluation was developed. Thirty-three diabetic patients who were hospitalized in Sanggye Paik hospital in Seoul were studied. Serving sizes and plate wastes were weighed by using an electric scale, and the CAN-Pro program was used to evaluate the nutritional value or the food consumed. The data were analyzed using the SAS package program for descriptive analysis, t-test, ANOVA, and the Pearson correlation. Using a five-point Likeu-type scale, the temperature s[ore ranged from 3.1 to 3.3 (1 : very poor, 5 : excellent), the preference store was 3.0-3.2 (1 : very dislike, 5:very like), the taste score was 2.9-3.2 (1 : very poor, 5 : excellent), and the amount of food served score was 2.8-3.0 (1 : too little, 5 : too much). Serving sizes were considered insufficient by patients because most of the DM diet was low in calories. Average plate waste for the DM diet was 26.2% of the total served, by weight, and was lower than that for patients consuming a normal diet, which was 30.3%, found in previous research. Those subjects who had been previously hospitalized and who wished to participate in a campaign for food waste reduction produced less plate waste than other groups (p<.05). Plate wastes of the DM diet were negatively correlated with taste, temperature, and preference, and were positively correlated with the amount served: however, these results were not statistically significant. It was found that diabetic patients consumed adequate levels of energy, protein, Ca, Fe, Vitamin B$_1$, Vitamin B$_2$, and niacin, but inadequate levels of Phosphorus, Vitamin A and Vitamin C. The plate wastes were calculated to be 26.2% of the total cost (￦ 3,489), which is ￦9l5. This represents a significant wastage of resources from the hospital. The results of this study could assist foodservice managers in both controlling food wastage, and improving the quality of hospital food services.

• 지능정보연구
• /
• 제28권3호
• /
• pp.237-258
• /
• 2022

국내 ICT 산업은 세계 시장 환경이 변화함에 따라, 세계에 미치는 영향력이 점차 커지고 있다. 이 산업은 국가 경제에 기술적, 사회적 측면에서 중요한 원동력으로 여겨지고 있다. 특히 ICT 산업 내 중소기업은 다양성 추구, 기술 발전 및 고용 창출 측면에서 국내 경제 발전의 반드시 필요한 주체로서 여겨지고 있다. 하지만 대기업이나 중견 기업에 비해 작은 규모이기 때문에, 불완전하고 급변하는 환경 속에서 중소기업이 차별화된 전략을 가지고 살아 남기 어려운 상황에 직면해 있다. 그래서 중소기업은 자신이 가진 역량을 향상시키기 위해서 많은 노력을 해야 하며, 정부도 이들이 지속적으로 경쟁력을 갖추도록 기업 내부자원에 맞는 바람직한 도움을 제공해 줄 필요성이 있다. 본 연구는 정부지원 프로그램에 참여하고 있는 ICT 중소기업의 유형을 분류하고, 각각의 유형별로 기업들이 가지고 있는 자원들과 성과창출 간의 관계를 분석하였다. 분석 자료로는 과학기술정보통신부에서 매년 실시하고 있는 ICT 중소기업 실태조사의 데이터를 사용하였다. 이를 위해, 본 연구는 첫번째 단계에서 ICT 중소기업들을 정부지원 프로그램 경험에 따라 공통의 요소를 기반으로 군집화 하였다. 세 개의 군집이 의미 있게 분류되었으며, 각각의 군집은 '적극적 참여형,' '초기 지원형,' '홀로서기형'으로 명명하였다. 두번째 단계로, 본 연구는 각 군집에 대해 프로파일링 분석을 통해 각 군집의 특성을 비교하였다. 본 연구가 수행한 세번째 단계는 군집별로 R&D 성과창출 메커니즘을 회귀분석을 통해 알아보았는데, 각 군집별로 서로 상이한 요인들이 성과창출에 영향을 주었고, 그 영향력의 크기도 서로 달랐다. 구체적으로, "적극적 참여형"은 "현재 보유 인력", "기술경쟁력", "전년도 R&D 투자액"이 "R&D 성과창출"에 중요한 요인들로 밝혀졌다. "초기 지원형"은 "연구개발전담조직 보유 여부", "전년도 R&D 투자액", "대기업 매출 비중", "대기업 납품 벤더 비중"이 성과에 기여하는 것으로 파악되었다. 마지막으로 "홀로서기형"의 경우, "현재 보유 인력"과 더불어 "미래 충원 계획", "기술경쟁력", "R&D 투자액", "대기업 매출 비중", "해외매출 비중"이 유의한 관계를 보여주었다. 본 연구는 정부의 창업프로그램 참여 방식에 따라, 향후 중소기업을 지원할 때, 어떤 전략을 수립해야 하는지를 보여준다는 정책적 시사점을 가지며, 구체적으로 어떤 지원을 제공해야 하는지에 대한 가이드를 제공한다는 실무적 시사점을 가진다.

• 한국측량학회지
• /
• 제30권2호
• /
• pp.143-152
• /
• 2012

항공영상을 이용하여 수치표면자료와 같은 3차원 자료를 자동으로 제작하기 위해서는 영상정합이 반드시 필요하다. 최근 사용되고 있는 항공 디지털 프레임 영상은 과거의 아날로그 영상에 비해 폐색지역이 적은 고중복도 다중 스트립 영상으로 촬영되기에 용이하다. 최근 다중 스트립 영상을 이용한 다중영상정합 기법에 대한 연구가 많이 이루어지고 있으며, 특히 각 영상에서 추출된 점(point feature)이나 형상(linear feature)의 유사성 측정 방법에 대한 연구가 진행되고 있다. 본 연구에서는 수직궤적 기반 다중영상정합을 대상으로 영역기반 유사성 측정 방법으로 SNCC(Sum of Normalized Cross-Correlation)와 SSD(Sum of Squared-Difference) 방법을 비교 분석하였다. 또한 영역기반 유사성 측정에 필요한 요소로 영상의 화소값, 화소값 기울기 강도, 화소값과 화소값 기울기 강도 평균을 각각 사용하여 결과를 비교하였다. 이 외에도 영역기반 유사성 측정에서 중요한 요소인 기준 윈도우의 크기를 비정규 적응형 기준 윈도우 방법과 정규 적응형 윈도우 방법을 적용하여 결과를 비교 분석하였다. 실험을 위하여 사용된 항공영상은 ZI Imaging 사의 DMC (Digital Modular Camera)에 의해 종중복도는 80%, 횡중복도는 60%로 촬영되었으며, 3개의 스트립으로 구성되었다. 다양한 방법으로 실험을 수행한 결과에 따르면 유사성 측정 방법으로는 SNCC, 유사성 측정 요소로는 화소값과 화소값 기울기 강도 평균, 그리고 비정규 적응형 기준 윈도우가 수직궤적 기반 다중영상정합의 영역기반 유사성 측정에 가장 적합하다는 것을 확인하였다.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.305-313
• /
• 2011

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.

• 간호행정학회지
• /
• 제12권1호
• /
• pp.131-139
• /
• 2006

Purpose: This study was carried out to understand the degree of moral distress of nurses and to provide scientific data for searching measures to efficiently manage their moral distress. Method: The survey was conducted with 302 nurses at the general hospital in City D by using the self-report type of questionnaire composed of 66 questions of 5-point Likert scale in four dimensions. Result: The mean scores of moral distress of nurses showed higher than average in all four dimensions: $80.54{\pm}14.82$ of 150 in the situational dimension, $52.99{\pm}9.98$ of 90 in the cognitive dimension, $13.30{\pm}2.85$ of 25 in the behavioral dimension, and $48.06{\pm}7.76$ of 65 in the emotional dimension. In addition, moral stress of each factor in the situational area showed $34.20{\pm}7.27$ in negative medical behavior, $10.98{\pm}2.53$ in lack of respect for autonomy of patients, excessive economic burden $10.86{\pm}2.94$, $7.40{\pm}1.89$ in irrational organizational administration and $17.10{\pm}3.50$ in negative nursing behavior. Conclusion: It is necessary to develop the intervention program to help nurses to reduce their moral distress since its degree showed considerably high.

• 간호행정학회지
• /
• 제22권5호
• /
• pp.471-479
• /
• 2016

Purpose: This study was conducted to evaluate the level of safety climate, fatigue, and safety performance and to identify the impact of safety climate and fatigue on the safety performance of operating room nurses. Methods: The study design was a descriptive survey. Participants were 174 operating room nurses from two general hospitals and two university hospitals in S and D cities. Three structurally designed questionnaires were used to evaluate their safety climate, fatigue, and safety performance. Collected data were analyzed using descriptive analysis, t-tests, ANOVAs, Pearson correlation coefficient, and stepwise multiple regression. Results: Safety performance of operating room nurses had a mean of 3.26 on a 5-point scale. 'Current department career'(${\beta}=.17$, p=.006) and 'safety climate (work-unit contribution) (${\beta}=.63$, p<.001) accounted for 39% of the variance in operating room nurses' safety performance. Conclusion: Findings indicate that work-unit contribution towards safety climate is an important factor in increasing operating room nurses' safety performance. Therefore, it is essential to find motivational properties consistent with the characteristics of the operating room environment.

• 대한한의학회지
• /
• 제24권1호
• /
• pp.100-109
• /
• 2003

Objectives : The purpose of this study is to 1. measure the skin resistance of jeong-acupuncture points using compound electrode, and 2. develop a database of skin resistance based on age and gender. Methods : The skin resistance of jeong-acupuncture points on the hands and feet of 191 healthy volunteers was measured using a specially designed compound electrode. A constant current of $5{\mu\textrm{A}}$ was applied to the measurement points and the skin resistance was obtained using amplifier, A/D converter and Acknowledge software program, Results : 1. ANOVA statistical analysis showed no significant differences between jeong-acupuncture points on hands and feet. 2. Paired samples t-test showed no significant differences between Yin-Yang meridian points, 3. When the data were sorted by gender, factor analysis showed statistically significant differences between male and female groups in all measured points except for left foot. 4. Based on the factor analysis, a significant relationship between the skin resistance and age was found in feet. However, no such relationship was found in hands. Conclusions : There are differences in skin resistance according to sex and age, Further clinical research is necessary using compound electrode method.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.504-513
• /
• 2013

This study evaluates the difference of visual effect according to pant style and geometric pattern. The researcher made 28 stimuli-combination of four pant Stiles (classic, baggy, skinny, and bell-bottom) and seven geometric pattern (large vertical stripe, small vertical stripe, large horizontal stripe, small horizontal stripe, large check, small check, and hound's tooth check). The test involved 96 female college students. The stimuli were made with the i-Designer computer program. The panels tested the computer screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. Three factors (lower-body compensation, abdomen highlight, and length compensation) influenced the visual effect pant styles and geometric patterns. The skinny style and large vertical stripe evaluated positively in elongated height and leg length and a slimmer overall body. It was shown that the vertical stripe pattern was evaluated as more positive than the horizontal stripe pattern in the visual effect; particularly, the results showed distinct aspects in the classic pants style. The mutual influence of the visual effect (according to pants style and geometric pattern) were indicated as two factors of lower-body compensation and length compensation. A more positive visual effects resulted in a higher mutual influence on pant style and geometric pattern.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1791-1796
• /
• 2005

Semi-shield tunneling is one of the propulsion construction methods used to lay pipes underground between two pits named 'entrance' and 'destination', respectively. Usually a simple composition, such as 'a fiducial target at the entrance+a total station (TS)+a target on the machine', is used to confirm the planned course. However, unavoidable curved sections are present in small-sized pipe lines, which are laid after implementation of a road system, for public works such as waterworks, sewer, electrical power, and gas and communication networks. Therefore, if the planned course has a curved section, it is difficult to survey the course with the abovementioned simple composition. This difficulty could be solved by using the multiple total stations (MTS), which attaches the cross type linear LED target to oneself. The MTS are disposed to where each TS can detect the LED target at the other TS or the base point or the machine. And the accurate relative positions between each MTS and target are calculated from measured data. This research proposes the relative and absolute coordinate calculation algorithm by using three MTS to measure a curved course with 20m curvature at 30m maximum distance, and verifies the algorithm experimentally.