• Explosives and Blasting
• /
• v.17 no.1
• /
• pp.27-55
• /
• 1999

The excavation works for deep foundation in urban areas have recently increased complaints of blasting vibration and settlement of ground level. Foundation must be excavated approximately up to 24-28m depths from the surface. The roads and subway line pass through the excavation area. The Dae-chung station is also located at the nearest distance 5-35m from the working site. To protect subway station and adjacient some structures from blasting and settlement, the level of ground vibration, displacements and stress were monitored and analyzed. The results can be summarized as follows ; 1. An empirical particle velocity equation were obtained by test blasts at Nassan Missi 860 Office tel construction site. $V{\;}={\;}K(D/\sqrt{W})^{-n}$, where the values for n and k are estimated tobe 0.371 and 1.551. From this ground vibration equation, the max. charge weight per delay time against distance from blasting point is calculated. Detailed blasting method is also presented. 2. To measure the horizontal displacement in directions perpendicular to the borehole axis, 6 inclinometers installed around working sites. The displacement at the begining was comparatively high because the installation of struts was delayed, but after its installation the values showed a stable trend. Among them, the displacement by 3 inclinometers installed on a temporary parking area showed comparatively high values, for example, the displacement measured at hole No. IC-l recoded the max. 47.04mm for 6 months and at hole No. IC-2 recorded the max. 57.33mm for 7 months. So, all of these data was estimated below a safe standard value 103mm. 3. Seven strain gauge meter was installed of measure the magnitude and change of stress acted on structs. The measured value of maximum stress was $-465{\;}kgf/\textrm{cm}^2,{\;}-338.4{\;}kgf/\textrm{cm}^2,{\;}302.3{\;}kgf/\textrm{cm}^2$ respectively. In compareto the allowable stress level of steel, they are estimated to be safe.

• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.185-192
• /
• 2009

Purpose: The aim of this study was to examine the correlation of the subjective and the objective evaluation of edentulous ridge bone quality, and to evaluate the change of the dental implant stability in each bone density group for early healing period after implant installation. Methods: Sixty-seven implants(Osstem implant$^{(R)}$, Seoul, Korea) were included in this study. We evaluated the bone density by 2 methods. The one was the subjective method which was determined by practitioner s tactile sense, the other was the objective bone type was based on Hounsfield units. The implant stability in each bone type group was assessed by resonance frequency analyzer(Osstell mentor$^{(R)}$). Data were analyzed for the change of the implant stability, and they were compared to verify the difference of groups at the time of installation, 2, 6, 10, 14 weeks postoperatively. Spearman's correlation was used to demonstrate the correlation between the subjective and the objective evaluation of the bone density, and analysis of variance(ANOVA) was used to analyze the differences of implant stability at each time point. Results: There was no close relation between the subjective and the objective evaluation of the bone density(r=0.57). In the subjective groups, there was statistically significant difference between the type 1 and 3 at 10 weeks and between the type 2 and 3 at 14 weeks. In the objective groups, there was no statistically significant difference between the D 1, 2, 3, 4, and 5 group with regard to RFA from baseline to 14 weeks(P>0.1). Conclusions: The implant stability increased over time during the study, and it was improved with bone density proportionally after 2weeks postoperatively. It is recommended that the decision of bone density is base on Hounsfield unit for implant loading time.

• KIEAE Journal
• /
• v.6 no.2
• /
• pp.67-74
• /
• 2006

As sustainable design technologies, advanced daylighting systems with lightshelves have been developed and are currently under monitoring the daylighting performance. This study aims to evaluate the comparative daylighting performance of sloped lightshelf and conventional glazing window with mock-up model, reconstructed as a prototype of Korean office building, sized $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and $1.8m{\times}4.8m$($w{\times}h$) for the south facing side-window was installed on the rooftop of engineering building, Kyung Hee University in Korea. It has an identical configuration of reference room and the test room. For the test room, the sloped type lightshelf system was designed as 10mm transparency sheet glass, tilt angle degree $29^{\circ}$, and total sized 1.28m (interior length 0.88m, exterior length 0.49m). It consisted of daylighting collector, entrance glazing and reflector. To assess daylighting performance, the totally 37 measuring points for illuminance and 2 view points of luminance were monitored in every 30 minutes from 12:00 to 15:00. For the detailed analysis, photometric sensors of each room were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point). Luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio, uniformity, and luminance are discussed.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.20-26
• /
• 2018

This study was conducted to develop a device for measuring the air flow by space variation through monitoring program, which acquires data by each point from each environmental sensor located in the greenhouse. The distribution of environmental factors(air temperature, humidity, wind speed, etc.) in the greenhouse is arranged at 12 points according to the spatial variation and a large number of measurement points (36 points in total) on the X, Y and Z axes were selected. Considering data loss and various greenhouse conditions, a bit rate was at 125kbit/s at low speed, so that the number of sensors can be expanded to 90 within greenhouse with dimensions of 100m by 100m. Those system programmed using MATLAB and LabVIEW was conducted to measure distributions of the air flow along the greenhouse in real time. It was also visualized interpolated the spatial distribution in the greenhouse. In order to verify the accuracy of CFD modeling and to improve the accuracy, it will compare the environmental variation such as air temperature, humidity, wind speed and $CO_2$ concentration in the greenhouse.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.129-135
• /
• 2015

The Ubiquitous City (U-City) spatial information technology aimed to provide services freely anytime and anywhere by converging high-tech information & communication technology in urban infrastructure has been available in diverse patterns. In particular, there have been studies on the development of 3D spatial information after selecting and matching key points with stereo images from the many Closed Circuit TV (CCTV) in the U-City. However, the data mostly used in extracting matching points haven't considered external environmental impacts such as illuminance. This study tested how much the matching points needed to construct 3D spatial information with the CCTV whose image quality is dependent upon changes in illuminance fluctuate under the same hardware performances. According to analysis on the number of matching points by illuminance, the number of matching points increased up to 3,000Lux in proportion to the illuminance when IRIS, shutter speed and ISO were fixed. In addition, a border between an object and background became more distinctive. When there was too much light, however, the page became brighter, and noise occurred. Furthermore, it was difficult to name key points because of the collapse of an inter-object border. It appears that if filmed with the study results, the number of matching points would increase.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.2
• /
• pp.94-109
• /
• 2000

The chances of disease pattern increased the importance of Health-promoting Lifestyle and a large part of the Health-promoting Lifestyle is associated with individual's habit. Health-promoting Lifestyle among nurses is very important because nurses could be a role model of patients and possibly influence many patients. The purpose of this study was oat on1y to assess how hospital nurses practice their Health-promoting Lifestyle but also to identify those affecting determinants. The subjects were 392 nurses working at 3 different hospital in Seoul. These data were collected by self administered questionnaire from April 27 to May 20, 2000. This study examined Health-promoting Lifestyle using In Sook Park's model, individual characteristics. Behavior-specific Cognitions and Affect factors using Pender's model and tried to fine out their relationships. The instruments used in this study were Health-promoting Lifestyle Profile developed by In Sock Park(1995). Likert's four-point scale was used also in this research. The percentage, mean standard deviation, AVNOVA, Pearson's correlation coefficient and multiple regression in the SAS package were used to analyze the data. The results of this study were as follows; 1. 52.3% of sample were aged between 25 and 29, 67.1% were single, 55.6% were university graduates, 51.8% earned 1.5 to 2.0 million won, 57.9% slept for d to 8 hours, 74.5% stated they were healthy. 2. 32.7% of sample worked in surgical gird department, 82.4% worked in 3 shift, 26.3% have been working as nurses for 5 to 7 years. Average score of Perceived self-efficacy was 3.63, Perceived benefits of action was 3.25, Social support was 2.75, and Perceived barriers to action was 1.87 which was the lowest score. 3. The average score if the performance in Health-promoting Lifestyle variable was 2.45 which was lower than previous study. The sanitary life Was 3.18 which was the highest score, harmonious relationship 3.13, emotional support 2.90. The variable with the highest degree of performance was the sanitary life, whereas the one with the west degree was the health diet. 4. There were no significant difference in perceived benefits of action with individual's a character, but in Perceived bait his of action there were significant differences with age(p<.01), marital status(p<.05), housing(p<.05), and Perceived health status(p<.05). In Perceived self-efficacy, there were significant differences with educational level(p<05), sleeping hours(p<.05), and BMI(p<.05). In Social support here were significant difference with housing and sleeping hours.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.385-390
• /
• 2016

ELoran Systems can provide Position, Navigation, and Time services with comparable performance to Global Positioning Systems (GPS) as a back up or alternative system. High timing and navigation performance can be achieved by eLoran signals because eLoran receivers use "all-in-view" reception. This incorporates Time of Arrival (TOA) signals from all stations in the service range because each eLoran station is synchronized to Coordinated Universal Time (UTC). Transmission station information and the differential Loran correction data are transmitted via an additional Loran Data Channel (LDC) on the transmitted eLoran signal such that eLoran provides improved Position Navigation and Timing (PNT) over legacy Loran. In this paper, we propose a technique for adapting the delay time compensation values in eLoran timing receivers to provide precise time comparison. For this purpose, we have designed a system that measures time delay from the crossing point of the third cycle extracted from the current transformer at the end point of the transmitter. The receiver delay was measured by connecting an active H-field, an E-field and a passive loop antenna to a commercial eLoran timing receiver. The common-view time transfer technique using the calibrated eLoran timing receiver improved the eLoran transfer time. A eLoran timing receiver calibrated by this method can be utilized in the field for precise time comparison as a GNSS backup.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.55-68
• /
• 2014

Some infrastructure these days is usually constructed under the ground for it to not interfere the foot-traffic of pedestrians, and thus, it is difficult to visually confirm the accurate location of the site where the establishments must be buried. These technical difficulties increase the magnitude of the problems that could arise from over-reliance on the experience of the worker or a mere blueprint. Such problems include exposure to flood and collapse. This paper proposes a constructor-oriented visualization system via mobile gadgets in general construction sites with occluded structures. This proposal is consisted with three stages. First, "Stage of detecting manhole and extracting features" detects and extracts the basis point of occluded structures which is unoccluded manhole. Next, "Stage of tracking features" tracks down the extracted features in the previous stage. Lastly, "Stage of visualizing occluded constructions" analyzes and synthesizes the GPS data and 3D objects obtained from mobile gadgets in the previous stages. This proposal implemented ideal method through parallel analysis of manhole detection, feature extraction, and tracking techniques in indoor environment, and confirmed the possibility through occluded water-pipe augmentation in real environment. Also, it offers a practical constructor-oriented environment derived from the augmented 3D results of occluded water-pipings.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.3
• /
• pp.324-339
• /
• 2005

The WTO/DDA Negotiation on the Fisheries Subsidies started by DDA(Doha Development Agenda : 2001.11)at early 2002 has been held about 20 times until the fist half of 2005. The Negotiation will be terminated until the end of 2005 but now, it is impossible to predict the exact conclusion of the Negotiation. There is a sharp conflict of opinion on the WTO/DDA Negotiation on the Fisheries Subsidies between FFG(Fish Friends Groups : USA, New Zealand etc) and Anti-FFG(Rep. Korea, Japan etc). The Fisheries Subsidies is regulated by the WTO/DDA Negotiation that regulates on the subsidies of industrial products, fisheries products, forest products. Considering the progress of the WTO/DDA Negotiation on the Fisheries Subsidies, Guidelines for the Fisheries Subsidies Negotiation were established in Doha Ministerial Declaration at 2001 and a necessity of a special regulation on the Fisheries Subsidies has been discussed from 2002 to 2004. After june, 2004, the Negotiation was proceeding as Rep. Korea, Japan and Taiwan agreed with discussing a special regulation on the Fisheries Subsidies and At 1st, August, 2004, they reached an agreement on a necessity of a special regulation on the Fisheries Subsidies. At Feb, 2005, discussion was suspended because of presenting the joint proposal from 3 countries(Rep. Korea, Japan and Taiwan) and now discussion on the Fisheries Subsidies is giving the first consideration to classification of prohibited/non-actionable subsidies, S&D of a developing countries, small fisheries, problems of farming, grace period etc. From now on, Considering the 18th~the 20th negotiations, it is expected that discussion of fisheries subsidies regulation including property and range of prohibited/non-actionable subsidies, S&D of a developing countries, a definition of small fisheries is accelerated. In this point of view, this paper analyzed and arranged every country's proposals holding our own position and took a survey to fishermen and fisheries experts about prohibited/non-actionable subsidies. In addition, this paper intends to suggest the way of future-negotiation and provides essential data to help government's policy making through analyzing prohibited/ non-actionable subsidies, farming subsidies, S&D of a developing countries, small scale fisheries.

• Journal of the Korean Home Economics Association
• /
• v.30 no.2
• /
• pp.21-34
• /
• 1992

The purpose of this study was to investigate (1) the effect of a masculine-feminine image in women's blouse·skirt on the perception of the wearer's occupational characteristics and suitability of the clothing for certain occupations, and (2) the effect of perceiver's sex, sex-role attitudes, and occupation on the perception formed by the function of clothing cues. The research design of the study consisted of 2(skirt color) × 2(blose color) × 3(masculine-feminine blouse forms) factorial desing of a blouse·skirt set. The experimental materials developed for this study were a set of stimuli and 2 response scales. The stimuli consisted of 12 drawings of woman's clothing made by systematic manipulations of 2 independent variabels (color and form) in drawings of blouse-skirt. The dependent variables were the perceptions of the wearer's occupational characteristics and suitability of the masculine or feminine clothing for certain occupations. Occupational characteristics were measured with a 7-point semantic differential scale composed of 21 bipolar adjectives. Perception of occupational suitability was assessed with 12 items of 5-point Likert type questions. In addition, the Bem Sex-role Inventory was used to assess perceiver's sex-role attitudes. The subjects consisted of 393 men and 389 women, whose occupations were classified as professionals, secondary school teachers, and white-collar workers. The data were analyzed by factor analysis, MANOVA, ANOVA, Mean and S.D. Three factors emerged to account for the perception of occupational characteristics. These factors were given the titles of (1) activity, (2) potency, and (3) evaluation factors. The activity factor was the largest, including 9 adjectives and accounting for 33.3% of the variance in blouse-skirt. On the blouse-skirt set, the form of the blouse had an effect on activity and evaluation for both sexes, while the color of the skirt had an effect on evaluation for both sexes as well as on potency for men. Strong effect of color and form on blouse·skirt were seen in perception of occupational suitability for the occupations of attorney(masculine) and secretary(feminine). On suitability for secondary school teaching occupations, the effects of color and form of blouse·skirt differed by sex of the subjects. Male subjects determined suitability by the color of the blouse, while female subjects determinied suitability on the basis of the form of the blouse. Perceiver's sex-role attitude and occupation partially influenced the perception of the wearer's occupational characteristics and suitability of the clothing for certain occupations.