• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.1-11
• /
• 2019

Recently, studies on the development of flexible electronic devices by combining flexible materials and a conductor have been actively performed as interest in wearable devices. Especially, carbon nanotubes (CNT) or graphene coating have been used to construct a circuit to induce improvement in flexibility and rigidity. Various technologies have been developed in the surface coating of conductive materials, which are key to the manufacture of flexible electronic devices. Surface coating products with 3D coating and micro-patterns have been proposed through electrospinning, electrification, and 3D printing technologies. As a result of this advanced surface coating technology, there is a growing interest in manufacturing gradient conductive surfaces. Gradient surfaces have the advantage that they are adapted to apply a gentle change or to inspect optimum conditions in a particular region by imparting continuously changing properties. In this study, we propose a manufacturing technique to produce a continuous gradient conductive surface by combining a partial stretching of elastomer and a conductive material coating, and introduce experimental results to confirm its performance.

• YAKHAK HOEJI
• /
• v.54 no.2
• /
• pp.106-111
• /
• 2010

The chemical structures of eight compounds purified from two plants (Polygala tenuifolia Willdenow and Dioscorea batatas Decene) were determined and their anti-microbial activity against three microbial strains (Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans) was tested. The three micro organisms were cultured in 96-well plates or Petri dishes without (control) or with the eight compounds added at concentrations of 100 to 0.01 ${\mu}M$ (wt/vol). The growth of the microorganisms in the medium was examined after a 24-h incubation. The inhibitory effect of each compound on the growth of the microorganisms was calculated from the optical density measured at 595 nm, turbidity, and size of the inhibition zone around the treated paper disc. The minimum inhiitory concentration (MIC) of compounds 4 to 7 against S. aureus was 0.08, 0.05, 1.3 and 0.02 ${\mu}M$, respectively, and 0.09, 0.1, 0.2 and 100 ${\mu}M$ against C. albicans. The $IC_{50}$ (50% inhibition) values of compounds 5 and 6 were 3.1 and 6.4 ${\mu}M$ against S. aureus, respectively, and 10 and 2.4 ${\mu}M$ against C. albicans. Therefore, compounds 4 to 6 were the most potent anti-microbial agents among the eight compounds tested.

• Advances in concrete construction
• /
• v.3 no.1
• /
• pp.15-37
• /
• 2015

Ongoing efforts for improved fracture toughness of engineered cementitious materials address the inherent brittleness of the binding matrix at several different levels of the material's geometric scale through the addition of various types of reinforcing fibers. Crack control is required for crack widths that cover the entire range of the grain size spectrum of the material, and this dictates the requirement of hybrid mixes combining fibers of different size (nano, micro, macro). Use of Carbon Nano-Tubes (CNT) and Carbon Nano-Fibers (CNFs) as additives is meant to extend the crack-control function down to the nanoscale where cracking is believed to initiate. In this paper the implications of enhanced toughness thus attained at the material nanostructure are explored, with reference to the global smeared constitutive properties of the material, through consistent interpretation of the reported experimental evidence regarding the behavior of engineered cementitious products to direct and indirect tension.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.464-467
• /
• 2005

Among several polishing techniques for micro structures, polishing process using magnetorheological(MR) fluid has advantages in the finishing process of 3-D micro structures because abrasives in the fluid can reach surfaces with complex feature and play their role. Although many researchers have been trying to reveal its polishing mechanism of the MR polishing, it has not been successful because in-situ measurement of state variables is difficult and process parameters are complex. In fact, one of the key factors for applying process control methodologies, such as Run-to-Run control, is the measuring and monitoring of slurry quality because the process strongly depends on the fluid property. Therefore, it is necessary to maintain consistent slurry quality to guarantee the process repeatability. The proposed equipment achieves the longer life cycle of MR fluid and reduces the variability of products. A new method to measure the material removal rate in MRF polishing process is also proposed and discussed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.51-60
• /
• 2010

This paper proposes a new scheme to obtain enhanced 3D shape information rapidly for WLPSI(White Light Phase Shifting Interferometry). WLPSI is a convenient method to measure the height of the micro products. First we propose an effective method of limiting search interval for detecting the peak of the visibility function in order to obtain 3D shpae information rapidly. Second we propose an automatic base level decision method basad on image processing and a correction algorithm using the least square approximation method to overcome the global tilt problem of the conventional WLPSI algorithms. Third we propose an adaptive filtering method to remove the distortion known as bat-wing effect which appears near the step discontinuity. Experimental results show that the proposed overall technique is fast and provides more enhanced 3D shape information compared with the conventional WLPSI algorithms.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.27-33
• /
• 2014

This paper presents a brief summary on a relatively new plasma aided electrolytic surface treatment process for light metals. A brief discussion regarding the advantages, principle, process parameters and applications of this process is discussed. The process owes its origin to Sluginov who discovered an arc discharge phenomenon in electrolysis in 1880. A similar process was studied and developed by Markov and coworkers in 1970s who successfully deposited an oxide film on aluminium. Several investigation thereafter lead to the establishment of suitable process parameters for deposition of a crystalline oxide film of more than $100{\mu}m$ thickness on the surface of light metals such as aluminium, titanium and magnesium. This process nowadays goes by several names such as plasma electrolytic oxidation (PEO), micro-arc oxidation (MOA), anodic spark deposition (ASD) etc. Several startups and surface treatment companies have taken up the process and deployed it successfully in a range of products, from military grade rifles to common off road sprockets. However, there are certain limitations to this technology such as the formation of an outer porous oxide layer, especially in case of magnesium which displays a Piling Bedworth ratio of less than one and thus an inherent non protective oxide. This can be treated further but adds to the cost of the process. Overall, it can be said the PEO process offers a better solution than the conventional coating processes. It offers advantages considering the fact that he electrolyte used in PEO process is environmental friendly and the temperature control is not as strict as in case of other surface treatment processes.

• Atmosphere
• /
• v.17 no.1
• /
• pp.101-108
• /
• 2007

To observe and analyze the cloud and fog characteristics, the METeorological Research Institute (METRI) has established the Cloud Physics Observation System (CPOS) by implementing the cloud observation instruments: Forward Scattering Spectrometer Probe (FSSP), PARticle SIze and VELocity (PARSIVEL), Microwave Radiometer (MWR), Micro Rain Radar (MRR), and 3D-AWS at the Daegwallyeong Enhanced Mountain Weather Observation Center. The cloud-related products of CPOS and the validation status for the size distribution of FSSP, the precipitable water of MWR, and the rainfall rate of MRR and PARSIVEL are described.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.143-149
• /
• 2000

Grinding technology in morden industry society is focusing on research and development for grinding stone and machin-ing parts for the purpose of high accuracy and high efficiency of products. But in order to equip the high technology and high accuracy of micro stone which is one of grinding stone a continuous effort on R& D is require. In this study the honing processing work of 2 cycle engine cylinder for motorcycle which has an open hole is carried out so as to investigate the boring and hone stone effects on accuracy of honing. As the experimental result of this study we could conclude that it is possible to secure good conditions of honing by controlling and keeping appropriate cycle-time in the stage of boring for the prior step of honing.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.8
• /
• pp.697-703
• /
• 2003

Cogeneration is the simultaneous generation of heat and electricity in a single unit, and is a highly energy-efficient technology compared to the independent generation of both products. Therefore, cogeneration has been widely introduced in many countries for use in industrial, commercial and residential applications. However, there have been few models with an output of less than 100 kilowatt. In the present study, a spark ignited gas engine with electric generation output of 10 kilowatts was developed for micro cogeneration package. The gas engine shows 26.7% of electric generation efficiency, NOx emission less than 10 ppm at 13% oxygen, 82 dB of Noise level, and about 3 seconds of switching time from idling to nominal power.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.505-515
• /
• 2021

The essential purpose of this study is to propose strategies for developing micro-, small-, and medium-sized enterprises (MSMEs) to realize sustainable competitive advantage by applying the SWOT analysis method. Thus, the main problems investigated in this study are: a) around 60-70% of MSMEs in Kulonprogo regency do not yet have access or financing from banks; b) lack of knowledge of production technology; c) in general, MSMEs business actors are still incorporated legal entities; d) MSMEs do not have a good financial administration and management system; e) coordination between MSMEs stakeholders has not been integrated; f) limited facilities and infrastructure of MSMEs, primarily related to technological tools; and g) limited access to raw materials so that MSMEs often get low-quality raw materials. This study employed a survey method with questionnaires and interviews. By using the Slovin tools sampling technique, the number of samples was 39 MSMEs in Kulonprogo Regency, Yogyakarta, Indonesia. The results of this study confirmed that the Kulonprogo MSMEs should pay attention to seven aspects of business management to achieve sustainable competitive advantage. The seven aspects are: 1) business strategy; 2) human resources; 3) information technology; 4) products; 5) promotion; 6) cooperation; and 7) corporate social responsibility (CSR).