• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.1
• /
• pp.66-74
• /
• 1993

Potassium-Graphite Intercalation Compounds(K-GICs) have been prepared from purified natural graphite by transformed two-bulb method with variations of reaction temperature ($T_g:450^{\circ}C$, $400^{\circ}C$, $350^{\circ}C$, $300^{\circ}C$, $250^{\circ}C$).Prepared K-GICs were identified to stage transition process by X-ray diffraction data. At these results, d values of (00l) diffraction at 1 stage and 2 stage were corresponded to $5.35\AA$ and $8.73\AA$ respectively. The stage stability and energy states of K-GlCs were obtained by UV /VIS Spectrophotometric data. We found that the minimum value of reflectance was 2.67 eV(465nm) at $250^{\circ}C$and it's moved to higher energy than original graphite's. And X-ray diffraction and UV /VIS spectrophotometric datas suggest that K-GICs were formed lower stage and many charge carriers exist between C atoms of graphite. And then, these results also provide informations on the electrical and other physical properities of K-GICs.Especially, according to studied reports, d values differ from them of each author, but accurate values were established through this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.140-142
• /
• 2011

In this paper, special purpose arithmetic unit for mobile graphics accelerator is designed. The designed processor supports six operations, such as $1/{\chi}$, $\frac{1}{{\sqrt{x}}$, $log_2x$, $2^x$, $sin(x)$, $cos(x)$. The processor adopts 2nd-order polynomial minimax approximation scheme based on IEEE floating point data format to satisfy accuracy conditions and has 5-stage pipeline structure to meet high operational rates. The SFAU processor consists of 23,000 gates and its estimated operating frequency is about 400 Mhz at operating condition of 65nm CMOS technology. Because the processor can execute all operations with 5-stage pipeline scheme, it has about 400 MOPS(million operations per second) execution rate. Thus, it can be applicable to the 3D mobile graphics processors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2016

Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.651-655
• /
• 1985

A series of S-(2,2-diethoxycarbonyl-1-phenylethyl)-L-glutathione derivatives (11a-e) were synthesized from the reaction of ${\beta},\;{\beta}$-diethoxycarbonylstyrene with L-glutathione in 9 : 1 aqueous methanol. Thus, S-(2,2-diethoxycarbonyl-1-phenylethyl)-L-glutathione (11a), S-2,2-diethoxycarbonyl-1-(3',4'-methylenedioxy)phenylethyl-L-glutathione (11b), S-2,2-diethoxycarbonyl-1-(3',4',5'-trimethoxy)phenylethyl-L-glutathione (11c), S-2,2-diethoxycarbonyl-1-(4'-hydroxy)phenylethyl-L-glutathione (11d), S-2,2-diethoxycarbonyl-1-(4'-methoxy)phenylethyl-L-glutathione (11e) were obtained in good yields. The structure of the adducts was characterized by analytical and spectral data. The effects of pH and solvents upon the yields were also briefly examined. In the range of pH from 4.0 to 8.0, the aqueous methanol were found to be the best solvent for the addition reaction and the antibacterial activities of the adducts to Gram(+) bacteria were found to be weak.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.3 no.3
• /
• pp.149-153
• /
• 2022

The degree distribution of the plant-pollinator network was identified by analyzing the data in the ecosystem and reproduced by a model of the growing bipartite mutualistic networks. The degree distribution of pollinator shows power law or stretched exponential distribution, while plant usually shows stretched exponential distribution. In the growth model, the plant and the pollinator are selected with probability P_p and P_A=1-P_p, respectively. The number of incoming links for the plant and the pollinator is l_p and l_A, respectively. The probability that the link of the plant selects the pollinator of the existing network given as $A_{k_i}=k^{{\lambda}_A}_i/{\sum}_i\;k^{{\lambda}_A}_i$, and the probability that the pollinator selects the plant is $P_{k_i}=k^{{\lambda}_p}_i/{\sum}_i\;k^{{\lambda}_p}_i$. When the nonlinear growth index is 𝛌_X=1 (X=A or P), the degree distribution follows a power law, and if 0≤𝛌_X<1, the degree distribution follows a stretched exponential distribution. The cumulative degree distributions of plants and pollinators of 14 empirical plant-pollinators included in Interaction Web Database were calculated. A set of parameters (P_A,P_P,l_A,l_P) that reproduces these cumulative degree distributions and a growth index 𝛌_X (X=A or P) were obtained. We found that animal takes very heterogenous connections, whereas plant takes a more flexible connection network.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.125-143
• /
• 2018

The study consisted of a survey of the residential satisfaction level of the 3rd grade students and a survey of accessibility from farms for practical field training to public facilities. According to the geographical location of the farms on the map, the average distance to facilities related to convenience or safety and health that students complained was about 12km. And that to social and public facilities was about 4.4km. Students pointed out the convenience of using transportation, commercial and convenient facilities, and the safety of anti-crime security facilities as complaints during the practice session. Residential satisfaction levels in five realms, such as facility and structure, convenience, safety, comfort and sociality, were not all reached at the satisfaction level. In particular, the satisfaction level of female students was sub-normal in the safety and convenience realms. The average satisfaction levels reviewed by department were sub-normal for horse industry and floriculture departments. By residential patterns, satisfaction with sharing with the farmers was higher than with other patterns. And satisfaction level by housing structure was much lower in the assembly and container structures Since residential satisfaction level is determined by the inside and outside environment of the dwelling, college should provide students with accurate and vivid data using information communication technologies.

• The Korean Journal of Petroleum Geology
• /
• v.13 no.1
• /
• pp.17-23
• /
• 2007

Gravity characteristics are investigated in the vicinity of the DASAN scientific station, located at the Svalbard Archipelago, the Arctic using ArcGP data. Boundary effects of free-air gravity anomalies, which appeared generally at the continental margin, are erased after Bouguer correction was applied. Complete Bouguer anomalies produced after terrain correction by GrOPO30 show that gravity anomalies increase from continent to marine. This phenomena seem to be related to the rise of Moho discontinuity. The cut-off frequency of 0.16 was decided after power spectrum analysis and the gravity anomalies were divided into two parts. Residual anomalies in high frequency part show that characteristics of high values along the faults and of low values related to thick sediments in the continent. Characteristic is low values from basement subsidence of continental slope or thick sediments in the marine. The undulation of Moho discontinuity from 3-D inversion modeling show typical characteristics of continental margin that become higher from Svalbard archipelago to Knipovich ridge bordering Eurasian plate.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.333-341
• /
• 2006

Since considerable time passed after completion of dam construction, Methods to judge the safety and/or to manage effectively have extreme limitation and restriction. Behavior analysis based on one point (site) by such as surface settlement gauge is typically performed in order to define deformation characteristic of dam. However, deformation characteristics of entire dam can not be analyzed by this method. This study adopted state-of-the-art terrestrial laser scanning technology, and developed the technology to analyze the entire deformation of dam. The analysis was compare with the outputs of surface settlement gauge to confirm the performance of 3D terrestrial laser scanning technology. As a result, through analyses of laser scanning data and the surface settlement gauge data, the studied dam shows behavior of deformation by own weight of dam. It is possible to confirm that the dam is entering the stage of stabilization presently.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.362-374
• /
• 2010

Product Lifecycle Management (PLM) is an integrated business approach to manage the creation and distribution of product information throughout the product development process. From the product perspective, PLM encompasses a holistic approach to product development and product information management. It supports the integrated product information in conjunction with the efficient product structures and BOM (Bill Of Material), user interfaces, proper functions, design processes and enterprise integration. Therefore, PLM should not only satisfy required functions as an enterprise software but also offer a systematic method for the efficient application from the initial stage of its development. Recently, many shipyards have been considering the PLM as a strategic solution to get the efficient management of product information such as 3-D models, BOM, drawings, documents, and the other product data. Though many studies on PLM are performed, most of them are performed in a function-based approach adequate for mass productive assembly industries. It could not help having limitations on applying the proper PLM system to the shipbuilding business since the requirements of shipbuilding PLM are too diverse and huge to design the architecture. This study presents the PLM framework which effectively reflects the diverse requirements of shipbuilding PLM. In order to get the macroscopic architecture of shipbuilding PLM, authors suggest the four-tier architecture model which considers the various requirements collected from shipyards. Entities of ship design data are modeled BOM in terms of product structure and hierarchical class diagram. Applicable functions of shipbuilding PLM are also investigated by analysis of issues of ship design. Finally, by reflecting the design process of shipbuilding, To-Be ship design procedure cooperated with the suggested PLM framework has been summarized.