• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.278-286
• /
• 2023

The present work evaluated the production of biohydrogen under mesophilic and thermophilic conditions through dark fermentation of palm oil mill effluent (POME) in batch mode using the design of experiment methodology. Response surface methodology (RSM) was applied to investigate the influence of the two significant parameters, POME concentration as substrate (5, 12.5, and 20 g/l), and volumetric substrate to inoculum ratio (1:1, 1:1.5, and 1:2, v/v.%), with inoculum concentration of 14.3 g VSS/l. All the experiments were analyzed at 37 ℃ and 55 ℃ at an incubation time of 24 h. The highest chemical oxygen demand (COD) removal, hydrogen content (H₂%), and hydrogen yield (HY) at a substrate concentration of 12.5 g COD/l and S:I ratio of 1:1.5 in mesophilic and thermophilic conditions were obtained (27.3, 24.2%), (57.92, 66.24%), and (6.43, 12.27 ml H₂/g COD_rem), respectively. The results show that thermophilic temperature in terms of COD removal was more effective for higher COD concentrations than for lower concentrations. Optimum parameters projected by RSM with S:I ratio of 1:1.6 and POME concentration of 14.3 g COD/l showed higher results in both temperatures. It is recognized how RSM and optimization processes can predict and affect the process performance under different operational conditions.

• Steel and Composite Structures
• /
• v.51 no.3
• /
• pp.337-349
• /
• 2024

The growing quantity of tires and building trash piling up in landfills poses a serious threat to the stability of the ecosystem. Researchers are exploring ways to reduce and use such byproducts of the construction industry in an effort to promote greener building practices. Thus, using recycled crumb rubber from scrap tires in concrete manufacturing is important for the industry's long-term viability. This study examines the proportion of waste rubber in fiber form, specifically at weight percentages of 5%, 10%, and 15%. Moreover, the study examines the shear behavior of reinforced concrete beams. A total of twelve RC beam specimens, each sized 100 mm by 150 mm by 1000 mm (w × d × L), were constructed and positioned to the test. Various mixtures were designed with different levels of scrap tire rubber content (0%, 5%, 10%, and 15%) and Stirrup Vol. Ratio (2.10, 2.80, and 3.53) in reinforced concrete beams. The findings indicate that the inclusion of scrap rubber in concrete leads to a decrease in both the mechanical characteristics and weight of the material. This is mostly attributed to the lower strength and stiffness of the rubberized concrete. Furthermore, estimations generated by a variety of design codes were examined alongside the obtained data. In order to make a comparison between the estimates provided by the different codes such as ACI 318-14, CEB-FIB and Iranian national building codes, a calculation was done to determine the ratio of the experimental shear strength to the anticipated shear strength for each code.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.355-362
• /
• 1999

This experiment was conducted to evaluated the effect of maturity at harvest and wrap colors on the quality of round baled rye(Secal cereale L.) silage at the forage experimental field, Grassland and Forage Crops Division, National Livestock Research Institute, Suwon in 1998. The experiment was consist of split-plot design with three repications. The main plots were three different harvesting stages : boot, heading, and flowering stages, the subplots were wrap colors : white, black, and light green color. Acid detergent fiber(ADF) and neutral detergent fiber(NDF) of rye silage were increased with delayed harvesting date, but there were no significant differdence among wrap colors. However, average in vitro dry matter digestibility (IVDMD) of rye silage with white color wrap tended to have higher than those of other colors. The silage pH of heading stage was highest (5.12), and that of flowering stage was lowest (4.57) in different harvest stages. Among tested wrap colors, white color wrap resulted on lowest pH than others (p<0.05), but there were no significant difference between black and light green color. Dry matter (DM) content of rye silage were increased as harvest stage progressed (p<0.05). However, DM content of white color was highest among warp colors, but there was signifiant difference (p<0.05). Ammonia-N content of silage harvested at boot stage was the highest in harvest stage, but there was no difference between heading and flowering stages. Among wrap colors tested, ammonia-N content of black color was highest, but there was no significant difference. The number of lactic acid bacteria of white colors was highest in different colors, and that of flowering stage was highest among harvest stage. Acetic and butyric acid contents were decreased as harvest stage progressed, and lactic acid was increased from 6.33 to 7.98%. However, wrap colors did not influence lactic acid concentration. Among different wrap colors, outside temperature of rye silage was affected by air temperature, but effect of inside temperature was minimal. Black color wrap increased inside temperature by $3{\sim}5^{\circ}C$. The results of this study indicate that rye should be harvested for round bale silage after heading stage. The quality of rye silage wrapped white and light green color will increase slightly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.10
• /
• pp.1366-1376
• /
• 2009

Effect of sulfur (S) on utilization efficiency of fresh cassava foliage and cassava hay in dairy cows was evaluated using thirty-two $1^{st}-2^{nd}$ lactation Holstein-Friesian crossbred dairy cows. The experimental treatment was a 2${\times}$2 factorial arrangement in a randomized complete block design (RCBD) using two roughages (rice straw+fresh cassava foliage (FCF) and rice straw+cassava hay (CH)) and two elemental sulfur (S) levels (0.15 and 0.4% S of dry matter (DM)), respectively. Four dietary treatments (FCF+0.15, FCF+0.4, CH+0.15 and CH+0.4) were offered ad libitum in the form of a total mixed ration (TMR) with concentrate to roughage (chopped rice straw+chopped cassava foliage) ratio at 60:40. Fresh cassava foliage or cassava hay resulted in similar dry mater intake, rumen ecology parameters, total tract digestibility, blood chemistry, milk production and composition. However, HCN intake, blood and milk thiocyanate concentration were significantly higher (p<0.01) in cows fed fresh cassava foliage with no sign of potential toxicity. Dry matter intake, body weight changes, molar percentage of propionate in rumen, neutral detergent fiber (NDF) digestibility and nitrogen (N) retention of cows tended to be increased while DM digestibility (65.6, 72.7, 68.6 and 72.1% of total DM intake for the respective treatments), rumen bacteria population (1.4, 1.7, 1.6 and $1.7{\times}10^{11}$ cell/ml for respective treatments), fungal zoospore population (0.4, 0.6, 0.4 and $0.5{\times}10^{6}$ cell/ml for respective treatments), urinary allantoin (25.3, 28.0, 26.3 and 27.6 g/d for respective treatments), microbial N yield (136.0, 154.6, 142.8 and 151.3 g N/d for respective treatments) and milk protein content (3.4, 3.5, 3.2 and 3.5% for respective treatments) were significantly (p<0.05) higher in cows fed on supplemented sulfur at 0.4% of DM in comparison with 0.15% S-supplemented diets. Based on these results, it is concluded that cassava foliage could be used as a portion of roughage for dairy cows and supplementation of S would be nutritionally beneficial.

• Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.229-234
• /
• 2002

Possibility of raising sunshine bass during the winter season in Korea was investigated. Also, the effect of feed on growth and body composition of sunshine bass was compared at the various salinity. Twenty sunshine bass $(Mean\;weight\;\pm S.D.\: :\;53.9 \pm 0.24 g)$ were stocked into the eighteen circular flow-through tanks. A 2 (feed) $\times$ 3 (salinity) factorial design with triplicate was used for this study. Feed was prepared into the 2 groups: the raw fish-based me>ist pellet (MP) containing $59.5\%$ crude protein and $9.4\%$ crude lipid, and commercial sinking red sea bream feed (CF) containing $49.9\%$ crude protein and $9.4\%$ crude lipid, respectively. And salinity was prepared into the 3 groups: freshwater $(0\%)$, brackishwater $(15\%)$, and seawater $(32\%)$. Fish were fed to satiation twice daily for 6 days a week. Fish were all survived at the end of the 8-week feeding trial. Weight gain (WG) and specific growth rate (SGR) of sunshine bass were significantly (P<0.05) affected by both feed and salinity. WG and SGR of sunshine bass fed the MP were significantly (P<0.05) higher than those of fish fed the CF in the same salinity. Amount of dry feed fed was significantly (P<0.05) affected by both feed and salinity. Feed consumption by sunshine bass fed on the MP was significantly (P<0,05) higher than by fish fed on the CF in the same salinity. Feed efficiency ratio (FER) was significantly (P<0,05) affected by salinity, but not by feed. Protein efficiency ratio (PER) was significantly (P<0.05) affected by both feed and salinity. Moisture and protein content of the whole-body of fish was not significantly (P>0.05) affected by either feed or salinity. However, lipid and ash content of the whole-body of fish was significantly (P<0.05) affected by salinity, but not by feed. In conclusion, the MP was superior to CF for growth of sunshine bass during the winter season in Korea and no mortality occurred. And sunshine bass seemed to grow better in freshwater $(0\%)$ and brac-kishwater $(15\%)$ than seawater $(32\%)$ under these experimental conditions, in terms of improvement in FER and PER in freshwater or brackishwater.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2011

Recently, the visual grading rule of Korea Forest Research Institute (KFRI) was revised and it is necessary to investigate the distribution characteristics of visual graded lumber in accordance with the revised rule. Therefore, in this study, the distribution characteristics of bending strength was investigated with revised visual grading rule and changed prior rule, respectively. The size of specimens was $38{\times}140{\times}3,000$ (mm) and the species were $Larix$ $kaempferi$ and $Pinus$ $koraiensis$. The moisture content was under 18% and the specimens were tested in accordance with ASTM D-198. The number of No. 1 and 2 grades, suitable for structural lumber, was increased when the revised visual grading rule was applied. Moreover, the revised rule was more effective to distinguish sharply between No. 1 and 2 grades and below No. 3 grade. Meanwhile, the lower 5% exclusion limit and allowable stresses were generally decreased when revised visual grading rule had been applied. However, the announcement of Korea Forest Service, tested with small clear specimen, was much lower than the allowable stresses of this test, tested with structural lumber. Therefore, the revision of allowable design values should be considered for more exact use and effective structural design.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.56-68
• /
• 2009

Ongoing and extensive urbanisation, which is frequently accompanied with careless construction works, may threaten important archaeological structures that are still buried in the urban areas. Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) methods are most promising alternatives for resolving buried archaeological structures in urban territories. In this work, three case studies are presented, each of which involves an integrated geophysical survey employing the surface three-dimensional (3D) ERT and GPR techniques, in order to archaeologically characterise the investigated areas. The test field sites are located at the historical centres of two of the most populated cities of the island of Crete, in Greece. The ERT and GPR data were collected along a dense network of parallel profiles. The subsurface resistivity structure was reconstructed by processing the apparent resistivity data with a 3D inversion algorithm. The GPR sections were processed with a systematic way, applying specific filters to the data in order to enhance their information content. Finally, horizontal depth slices representing the 3D variation of the physical properties were created. The GPR and ERT images significantly contributed in reconstructing the complex subsurface properties in these urban areas. Strong GPR reflections and highresistivity anomalies were correlated with possible archaeological structures. Subsequent excavations in specific places at both sites verified the geophysical results. The specific case studies demonstrated the applicability of ERT and GPR techniques during the design and construction stages of urban infrastructure works, indicating areas of archaeological significance and guiding archaeological excavations before construction work.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.598-607
• /
• 2016

This study was conducted to evaluate the amount of nitrogen (N) top dressing based on the normalized difference vegetation indices (NDVI) by ground based sensors for leaf perilla under the polyethylene house. Experimental design was the randomized complete block design for five N fertilization levels and conventional fertilization with 3 and 4 replications in Gumsan-gun and Milyang-si field, respectively. Dry weight (DW), concentration of N, and amount of N uptake by leaf perilla as well as NDVIs from sensors were measured monthly. Difference of growth characteristics among treatments in Gumsan field was wider than Milyang. SPAD-502 chlorophyll meter reading explained 43.4% of the variability in N content of leaves in Gumsan field at $150^{th}$ day after seedling (DAS) and 45.9% in Milyang at $239^{th}$ DAS. Indexes of red sensor (RNDVI) and amber sensor (ANDVI) at $172^{th}$ day after seedling (DAS) in Gumsan explained 50% and 57% of the variability in N content of leaves. RNDVI and ANDVI at $31^{th}$ DAS in Milyang explained 60% and 65% of the variability in DW of leaves. Based on the relationship between ANDVI and N application rate, ANDVI at $172^{th}$ DAS in Gumsan explained 57% of the variability in N application rate but non significant relationship in Milyang field. Average sufficiency index (SI) calculated from ratio of each measurement index per maximum index of ANDVI at $172^{th}$ DAS in Gumsan explained 73% of the variability in N application rate. Although the relationship between NDVIs and growth characteristics was various upon growing season, SI by NDVIs of ground based remote sensors at top dressing season was thought to be useful index for recommendation of N top dressing rate of leaf perilla.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.459-470
• /
• 2003

It is required to research on high-dimensional index structures for efficiently retrieving high-dimensional data because an attribute vector in data warehousing and a feature vector in multimedia database have a characteristic of high-dimensional data. For this, many high-dimensional index structures have been proposed, but they have so called ‘dimensional curse’ problem that retrieval performance is extremely decreased as the dimensionality is increased. To solve the problem, the cell-based filtering (CBF) scheme has been proposed. But the CBF scheme show a linear decreasing on performance as the dimensionality. To cope with the problem, it is necessary to make use of parallel processing techniques. In this paper, we propose a parallel CBF scheme which uses a horizontally-partitioned technique as declustering. In order to maximize the retrieval performance of the proposed parallel CBF scheme, we construct our parallel CBF scheme under a SN (Shared Nothing) cluster architecture. In addition, we present a data insertion algorithm, a rage query processing one, and a k-NN query processing one which are suitable for the SN cluster architecture. Finally, we show that our parallel CBF scheme achieves better retrieval performance in proportion to the number of servers in the SN cluster architecture, compared with the conventional CBF scheme.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.221-225
• /
• 1974

The field experiment was conducted to find out the effect of inoculation of Rhizobium and interaction between amount of nitrogen and inoculating in soybean with 4 replicated split plot design. Main plot was 4 level of nitrogen 0, 2, 6, 12kg/10a and subplot was inoculation and uninoculation. The results are summarized as follows. 1. The yield of soybean did not show any significant difference among nitrogen level or between inoculating but yield of inoculated plot was a little increased than that of uninoculation. 2. At four leaves stage and flowering stage, the weight of nodules in root was decreased with incresing amount of nitrogen significantly and uninoculation caused a reduction compared with modulation significantly and those tendency was same in plant height, and those difference among treatment was more distinct in four leaves stage than in flowering stage. 3. After harvest, total nitrogen content in soil was not only increased with increasing nitrogen level but also was more increased in inoculated plot than in uninoculated plot except nitrogen 0kg/10a level. Inoculation of Rhizobium raised 15kg of nitrogen per l0a at 6kg nitrogen level compared with uninoculation.