• 제목/요약/키워드: 3AP

검색결과 1,498건 처리시간 0.024초

AP계 추진제에서 황색산화철의 연소촉매 효과 (Effect of FeOOH on Burn Rate for AP Propellant)

  • 임유진;김준형;유지창
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.390-393
    • /
    • 2010
  • 황색 산화철인 FeOOH가 3% 첨가된 AP의 열분해 속도가 적색 산화철인 $Fe_2O_3$ 경우보다 매우 빠른 것으로 확인되었다. 연소속도 개선제로 HTPB/AP계 추진제에 황색 산화철을 적용한 결과, 적색 산화철의 경우보다 연소 속도가 10 ~ 25% 더 빠르게 나타났다. 황색 및 적색 산화철을 사용한 HTPB/AP 추진제 조성물에서 점도 상승이나 경도 상승에서 특이한 차이점은 없었다.

  • PDF

다단 하이브리드 로켓에서 AP 첨가 추진제의 연료과농 연소 (Fuel-rich Combustion with AP added Propellant in a Staged Hybrid Rocket Engine)

  • 이동언;이창진
    • 한국항공우주학회지
    • /
    • 제44권7호
    • /
    • pp.576-584
    • /
    • 2016
  • 본 연구는 다단 하이브리드 로켓의 낮은 비추력 성능을 향상시키는 방법으로 AP 첨가 추진제를 제안하고 있다. 추진제에 첨가된 AP 첨가비율 변화에 따라 다단 하이브리드 로켓의 비추력 성능 변화와 연료과농 연소특성 변화를 살펴보았으며, 이때 AP 첨가비율은 하이브리드 로켓의 연소 특징을 유지하기 위해 최대 15 wt%로 제한하였다. 결과에 의하면, AP 15 wt% 추진제는 AP 0 wt% 추진제와 비교하여 비추력 성능이 약 3% 향상되었다. 또한, 동일한 연소온도를 유지함에도 불구하고, AP 첨가비율을 증가시키면 산화제 유입량, O/F비 변화량, 그리고 연소압력은 감소하며 반경반향 온도 분포가 좋아지는 등 다단 하이브리드 로켓의 성능향상에 긍정적인 효과가 나타났다. 그러나 오직 AP를 추진제에 첨가하는 것만으로 다단 하이브리드 로켓의 비추력 성능을 일반 화학로켓의 수준으로 향상시키는 것이 매우 어려운 일임을 고려할 때, 추가적으로 금속입자 첨가를 통해 비추력 성능을 향상시킬 계획이다.

Purification and characterization of a 1,3-β-D-glucan recognition protein from Antheraea pernyi larve that is regulated after a specific immune challenge

  • Youlei, Ma;Jinghai, Zhang;Yuntao, Zhang;Jiaoshu, Lin;Tianyi, Wang;Chunfu, Wu;Rong, Zhang
    • BMB Reports
    • /
    • 제46권5호
    • /
    • pp.264-269
    • /
    • 2013
  • Pattern recognition receptors are known to participate in the activation of Prophenoloxidase system. In this study, a 1,3-${\beta}$-D-glucan recognition protein was detected for the first time in Antheraea pernyi larvae (Ap-${\beta}GRP$). Ap-${\beta}GRP$ was purified to 99.9% homogeneity from the hemolymph using traditional chromatographic methods. Ap-${\beta}GRP$ specifically bind 1,3-${\beta}$-D-glucan and yeast, but not E. coli or M. luteus. The 1,3-${\beta}$-D-glucan dependent phenoloxidase (PO) activity of the hemolymph inhibited by anti-Ap-${\beta}GRP$ antibody could be recovered by addition of purified Ap-${\beta}GRP$. These results demonstrate that Ap-${\beta}GRP$ acts as a biosensor of 1,3-${\beta}$-Dglucan to trigger the Prophenoloxidase system. A trace mount of 1,3-${\beta}$-D-glucan or Ap-${\beta}GRP$ alone was unable to trigger the proPO system, but they both did. Ap-${\beta}GRP$ was specifically degraded following the activation of proPO with 1,3-${\beta}$-Dglucan. These results indicate the variation in the amount of Ap-${\beta}GRP$ after specific immune challenge in A. pernyi hemolymph is an important regulation mechanism to immune response.

족관절 관절염이 있는 환자에서 체중 부하상태의 양측 족관절과 환측 족관절 전후면 방사선 사진의 방사선학적 측정치의 비교 (Comparison of Radiologic Parameters between Weight Bearing Affected Single Ankle Anteroposterior View and both Ankle Anteroposterior View in Ankle Osteoarthritis)

  • 김정래;이우천
    • 대한족부족관절학회지
    • /
    • 제15권3호
    • /
    • pp.159-164
    • /
    • 2011
  • Purpose: This study was performed to analyze the results of radiologic parameters between weight bearing affected single ankle anteroposterior (AP) view and both ankle AP view in ankle osteoarthritis (OA). Materials and Methods: Between January 2009 and August 2010, 41 patients (50 ankles) who visited our institution to treat ankle OA were reviewed retrospectively. In radiographic assessment, weight bearing affected single ankle AP view and both ankle AP view were checked, and measured tibial anterior surface angle (TAS), tibial medial malleolar angle (TMM), talar tilting angle (TT), maximum and minimun joint space width (JSW) of ankle, width between articular surface of medial malleolar and medial articular surface of talus as radiologic parameters. Results: On weight bearing both ankle AP view, TAS was $85.4{\pm}4.1^{\circ}$, TMM was $33.1{\pm}9^{\circ}$, TT was $5.4{\pm}6.1^{\circ}$, maximum JSW was $3.2{\pm}2.7$ mm, minimum JSW was $1.1{\pm}1.3$ mm, width between articular surface of medial malleolar and medial articular surface of talus was $1.8{\pm}1.8$ mm and on weight bearing affected ankle AP view, TAS was $85.3{\pm}3.9^{\circ}$, TMM was $34.3{\pm}10.9^{\circ}$, TT was $5.4{\pm}6.5^{\circ}$, maximum JSW was $3.2{\pm}2.7$ mm, minimum JSW was $1.1{\pm}1.3$ mm, width between articular surface of medial malleolar and medial articular surface of talus was $1.6{\pm}1.7$ mm. Conclusion: There is no statistical significance in radiologic parameters between weight-bearing affected single ankle AP view and both ankle AP view in ankle OA.

2-아닐리노 피리딘을 배위자로 하는 이핵 로듐착물의 두 산소첨가 생성물에 대한 합성 및 전기화학적 성질 (Synthesis, ESR and Electrochemical Characterization of Dioxygen Binding to Dirhodium Complexes with 2-anilinopyridinato Bridging Ligand)

  • 박광하;전무진
    • 대한화학회지
    • /
    • 제33권6호
    • /
    • pp.633-643
    • /
    • 1989
  • 두 개의 아닐린계 질소와 두 개의 피리딘계 질소가 각각의 로듐이온에 트란스형으로 결합된 $Rh_2(ap)_4$(2,2-trans) 이성질체는 -0.40 V vs SCE에서 디 옥시젼의 한 전자를 환원시킬 수 있음을 보여주고 있다. 123K에서의 ESR 스펙트럼에 의하면 한 로듐이온에 산소 1분자가 측쇄 결합하여 $[Rh_2(ap)_4(O_2)]^-$이온을 형성하고, 착물은 $Rh_2^{III}$ 산화수를 가짐을 알 수 있다. 이 착물은 시안화메틸/염화메틸렌 혼합용액에서 Rh-$O_2^-$결합의 분열없이 [$Rh_2(ap)_4(O_2)(CH_3CN)]^-$을 형성한다. -0.25, 0.55V에서 산화되었을 때 [$Rh_2(ap)_4(O_2)]^-$$Rh_2(ap)_4(O_2)$와 [$Rh_2(ap)_4(O_2)]^+$을 형성하기 위하여 두 단계의 한 전자 산화과정이 일어난다. 두 화학종은 모두 초산소가 측쇄 결합되어 있지만, 전자는 $Rh^{II}Rh^{III}$, 후자는 $Rh_2^{III}$의 산화수를 갖는다. 반면에, ESR 스펙트럼과 $CH_3CN$ 부가 연구에서 보면 후자 착물이 로듐이온에 위치한 부대전자와 함께 [$Rh^{II}Rh^{III}(ap)_4(O_2)]^+$로 기술되고 그 착물은 측쇄 배위결합된 산소분자를 가지고 있음을 보여주고 있다. 또한 전기화학적, ESR 연구는 디 옥시젼의 활동도가 전기화학적 산화환원전위와 관계 있음을 보여주고 있다.

  • PDF

대기압 이하에서 고체 추진제의 점화 특성 향상 연구 (Ignition of Solid Propellants at Subatmospheric Pressures)

  • 김인철;류백능;정정용
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제26회 춘계학술대회논문집
    • /
    • pp.383-386
    • /
    • 2006
  • HTPB/AP 혼합형 추진제(A형)와 니트라민계 산화제가 소량 함유된 추진제의 진공 점화 특성을 고찰하였다. A형 추진제의 임계 점화 압력은 4psia로 판단되었고, AP의 일부를 HMX와 HNIW로 $5\sim15%$ 치환한 니트라민계 혼합형 추진제(B형)에서는 임계 압력은 0.4psia, 점화지연시간은 50% 이상 향상되었다. 이러한 이유는 HMX나 HNIW 성분이 AP에 비해 낮은 온도$(\sim220^{\circ}C)$에서 발열 분해되는 특성에 기인되는 것으로 보인다. 점화도움물질인 $B/KNO_3$를 추진제 표면에 코팅한 결과, 15% 정도 점화성이 개선되는 효과를 보였다. $B/KNO_3$ 점화제에 2차 결합제로 NC를 소량 사용하고, 이를 추진제 그레인의 점화도움물질로 적용하였다.

  • PDF

MSS 기법과 무선 AP 특징을 활용 실외 측위 시스템 설계 및 구현 (Design and Implementation of Outdoor Positioning System Using MSS Mechanism & Wireless AP characteristic)

  • 이현섭;김진덕
    • 한국멀티미디어학회논문지
    • /
    • 제14권3호
    • /
    • pp.433-439
    • /
    • 2011
  • 무선 AP 기반 측위 시스템은 실세계에 분포한 AP의 정보를 수집하여 DB화 한 뒤 팀색 되는 AP정보와 비교하여 측위를 수행한다. 기존의 핑거 프린트 방식은 DB를 구성할 당시 특정 위치에서 수집되는 데이터를 최대한 많이 얻어내 그 값의 평균값을 저장하여 측위에 사용하는 방식이다. 그러나 평균치를 활용하면 오차가 발생할 확률이 있다. 이러한 오차는 정확한 측위를 배경으로 하는 서비스에는 치명적인 약점이 된다. 본 논문에서는 기존 무선 AP 측위 시스템의 특정에 대하여 설명하고 핑거프린트 적용에 있어서 발생하는 문제점을 해결하기 위하여 AP 정보의 특정을 활용한 DB 구축방안과 MSS 기법을 적용한 측위 기법에 대하여 제안하였다. 그리고 핑거프런트방식과 제안한 방식을 구현하고 실험한 결과를 최적의 조건에서 제안한 방식의 불일치율이 27%로 줄었음을 보여주었다.

C형 간염바이러스 코어 단백질에 의한 p53 활성화와 프로모터 과메틸화를 통한 E6AP 발현 억제 (Hepatitis C Virus Core Protein Activates p53 to Inhibit E6-associated Protein Expression via Promoter Hypermethylation)

  • 곽주리;장경립
    • 생명과학회지
    • /
    • 제28권9호
    • /
    • pp.1007-1015
    • /
    • 2018
  • E6AP (E6-associated protein)는 C형 간염바이러스(hepatitis C virus, HCV)의 코어 단백질 유비퀴틴화와 프로테오좀 분해를 유도하여 캡시드 조립을 저해함으로써 HCV 복제를 억제하는 것으로 알려져 있다. 반면에 HCV 코어 단백질은 숙주의 항바이러스 방어계에 대항하고 자신의 유비퀴틴-의존적 프로테아좀 분해를 막기 위하여 DNA 메틸화를 통하여 E6AP 발현을 저해하는 전략을 진화과정에서 획득하였다. 본 연구에서는 HCV 코어 단백질이 E6AP 발현을 저해하는 기전을 밝혀내고자 하였다. HCV 코어 단백질은 HepG2 세포에서 DNA 메틸화 효소들인 DNMT1, 3a 및 3b의 단백질 수준과 효소 활성을 증가시켜 프로모터 과메틸화를 통하여 E6AP 발현을 저해하였지만 p53를 발현하지 않는 Hep3B 세포에서는 이러한 효과들이 관찰되지 않았다. 흥미롭게도 Hep3B 세포에 p53만 과발현시키면 HCV 코어 단백질이 없더라도 DNMT가 활성화되고 프로모터 과메틸화를 통하여 E6AP 발현이 저해되었다. 또한 p53 녹다운 및 과발현 실험을 통하여 p53 활성화가 HCV 코어 단백질의 효과에 필수적임을 알 수 있었다. 이로 인하여 Hep3B 보다 HepG2 세포에서 낮은 수준의 유비퀴틴화된 HCV 코어 단백질이 검출되었다. 따라서 HCV 코어 단백질은 p53-의존적으로 자신의 유비퀴틴-매개성 프로테아좀 분해를 저해한다.

DTLS 기반의 CoAP 보안 메커니즘 분석 및 성능평가 (DTLS-based CoAP Security Mechanism Analysis and Performance Evaluation)

  • 한상우;박창섭;조정모
    • 융합보안논문지
    • /
    • 제17권5호
    • /
    • pp.3-10
    • /
    • 2017
  • 자원 제약적 IoT 환경에 최적화 된 표준 프로토콜 CoAP(Constrained Application Protocol)은 IoT 환경 내의 센서노드(CoAP Server) 와 인터넷 상의 클라이언트(CoAP Client) 간의 웹 기반 통신을 지원한다. CoAP은 클라이언트의 CoAP Request 메시지에 대하여 서버의 CoAP Response 메시지로 응답하며 동작하는 Request/Response 모델이다. CoAP에서는 메시지의 보호를 위해 CoAP-DTLS(Datagram TLS)의 사용을 권고하고 있다. CoAP-DTLS에서 권고되는 보안모드(Security Mode)는 PSK(Pre-Shared Key), RPK(Raw Public Key) 및 Certificate가 있다. 하지만 IoT환경에서의 DTLS 사용에 대한 실효성 검증은 진행 중에 있다. 본 논문에서는 보안 모드가 적용될 수 있는 환경인 IETF에서 제시하는 7가지의 활용사례(Use Cases)에 대하여 분석하고 적절한 보안모드 그룹으로 구분한다. 또한 CoAP과 DTLS 보안 모드별 분석을 수행하고, Cooja 시뮬레이터를 통하여 보안채널 생성시간, 보안채널 생성 단계별 시간, 모트의 RAM/ROM 소모량에 대한 성능평가를 수행한 후 실 환경 적용 가능성에 대하여 평가한다.

Calcium release and physical properties of modified carbonate apatite cement as pulp capping agent in dental application

  • Zakaria, Myrna Nurlatifah;Cahyanto, Arief;El-Ghannam, Ahmed
    • 생체재료학회지
    • /
    • 제22권4호
    • /
    • pp.346-351
    • /
    • 2018
  • Background: Carbonate apatite ($CO_3Ap$) and silica-calcium phosphate composite (SCPC) are bone substitutes with good prospect for dental application. SCPC creates a hydroxyapatite surface layer and stimulate bone cell function while, $CO_3Ap$ induce apatite crystal formation with good adaptation providing good seal between cement and the bone. Together, these materials will add favorable properties as a pulp capping material to stimulate mineral barrier and maintain pulp vitality. The aim of this study is to investigate modification of $CO_3Ap$ cement combined with SCPC, later term as $CO_3Ap-SCPC$ cement (CAS) in means of its chemical (Calcium release) and physical properties (setting time, DTS and pH value). Methods: The study consist of three groups; group 1 (100% calcium hydroxide, group 2 $CO_3Ap$ (60% DCPA: 40% vaterite, and group 3 CAS (60% DCPA: 20% vaterite: 20% SCPC. Distilled water was employed as a solution for group 1, and $0.2mol/L\;Na_3PO_4$ used for group 2 and group 3. Samples were evaluated with respect to important properties for pulp capping application such as pH, setting time, mechanical strength and calcium release evaluation. Results: The fastest setting time was in $CO_3Ap$ cement group without SCPC, while the addition of 20% SCPC slightly increase the pH value but did not improved the cement mechanical strength, however, the mechanical strength of both $CO_3Ap$ groups were significantly higher than calcium hydroxide. All three groups released calcium ions and had alkaline pH. Highest pH level, as well as calcium released level, was in the control group. Conclusion: The CAS cement had good mechanical and acceptable chemical properties for pulp capping application compared to calcium hydroxide as a gold standard. However, improvements and in vivo studies are to be carried out with the further development of this material.