• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.70-78
• /
• 1988

To separate and utilize the main components of hardwood (Quercus mongolica) by organosov pulping (ester pulping), chips were cooked at various conditions such as; the solvent ratio (acetic acid: ethylacetate: water, 50:25:25; 33:33:34; 25:50:25), maximum temperature (165, 170, $175^{\circ}C$), and cooking times (2, 2.5, 3 hr). The pulps were bleached by the sequences of CEDED, C/DEDED, PEDED. Lignin, sugars, and acetic acid were separated from black liquor and washing liquors. 1. The selective delignification at optimal pulp yield (43-45%) was obtained by cooking at acetic acid: ethylace tate: water ratio of 33:34:34 for 3 hr at $170^{\circ}C$. But in this case, kappa no. of the pulp was not reduced under 60 points. 2. Kappa no. of the pulp could be dropped by an acetone wash to remove reprecipitated lignin a t cooked pulp. 3. The unbleached pulps had a brightness of 45-50%, whereas the bleached pulps gave at 88-93% brightness. Tensile, burst, and tear strengths of the bleached pulps were lower than those of kraft pulp, especially in tear strength. The pulps which were bleached with CEDED sequence were higher in strengths than another bleaching sequences. 4. Lignin of 90-95%(lignin base on wood)was separated from black liquor and washing liquors, while the purified sugars and recovery of acetic acid were a low. An organic phase composed of acetic acid, ethylacetate, and water was separated to a two-phase system by proper adjustment of the solvent ratios.

• Annals of Rehabilitation Medicine
• /
• v.42 no.6
• /
• pp.814-821
• /
• 2018

Objective To suggest rotation angles of fluoroscopy that can bypass the carotid sheath according to vertebral levels for cervical transforaminal epidural steroid injection (TFESI). Methods Patients who underwent cervical spine magnetic resonance imaging (MRI) from January 2009 to October 2017 were analyzed. In axial sections of cervical spine MRI, three angles to the vertical line (${\alpha}$, angle not to insult carotid sheath; ${\beta}$, angle for the conventional TFESI; ${\gamma}$, angle not to penetrate carotid artery) were measured. Results Alpha (${\alpha}$) angles tended to increase for upper cervical levels ($53.3^{\circ}$ in C6-7, $65.2^{\circ}$ in C5-6, $75.3^{\circ}$ in C4-5, $82.3^{\circ}$ in C3-4). Beta (${\beta}$) angles for conventional TFESI showed a constant value of $45^{\circ}$ to $47^{\circ}$ ($47.5^{\circ}$ in C6-7, $47.4^{\circ}$ in C5-6, $45.7^{\circ}$ in C4-5, $45.0^{\circ}$ in C3-4). Gamma (${\gamma}$) angles increased at higher cervical levels as did ${\alpha}$ angles ($25.2^{\circ}$ in C6-7, $33.6^{\circ}$ in C5-6, $43.0^{\circ}$ in C4-5, $56.2^{\circ}$ in C3-4). Conclusion The risk of causing injury by penetrating major vessels in the carotid sheath tends to increase at upper cervical levels. Therefore, prior to cervical TFESI, measuring the angle is necessary to avoid carotid vessels in the axial section of CT or MRI, thus contributing to a safer procedure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.4
• /
• pp.231-238
• /
• 2007

In the previous study, the anti-oxidant activity of extract/fraction of Sueada asparagoides (SA) was investigated and the results showed that the ethylacetate (EtOAc) fraction and its aglycone fraction had the best performance on the free radical scavenging activity, reactive oxygen species scavenging (ROS) activity and cell protective activity (J. Soc. Cosme. Scientists Korea, 33(3), 145 (2007)). In this study, the stability of cream containing 0.3% SA EtOAc extract (called extract below) was evaluated. pH, viscosity and absorbance (363 nm) were measured under the 4 different temperatures ($0^{\circ}C,\;25{\circ}C,\;37{\circ}C\;and\;45{\circ}C$) and under the sun light at the 4 week intervals during the 12 weeks in total. The control cream without containing the extract did not show pH change under the different temperatures mentioned above. However, the pH of the cream the extract was decreased 0.08 at the temperature ranges of $0^{\circ}C\;to\;37^{\circ}C$. Under the $45^{\circ}C$ and sun light condition, the pH was decreased 0.51 and 0.66, respectively. The cream containing the extract did not show absorbance change at the temperature ranges of 0 to $37^{\circ}C$ for 12 weeks. Instead, the absorbance of the cream treated under $45^{\circ}C$ and sun light condition was decreased 7.6 % and 7.4 %, respectively. This decrease in absorbance is relatively small compared to the 48.3 % decrease of the extract sampled from the cream using ethanol solution. This indicates that the extract is stabilized in the cream. After treating the cream for 12 weeks under the different temperatures, the viscosity was measured for the cream containing the extract and control cream. The values were increased by 1,748 cPs in average compared to the initial value for the former and by 951 cPs in average for the latter. On the other hand, the viscosity of control cream treated under the sun light for 12 weeks was significantly decreased (4,022 cPs) relative to the cream containing the extract, which showed 2,484 cPs increase in viscosity. This indicates that the SA extract contributes to the stability of the emulsion product by protective effect to maintain the viscosity of the cream against sun light. In addition, any change in color or smell was not observed through 12 weeks of the experimental time period. Thus, it is concluded that it is still not clear in the stability of the cream containing the extract when it is stored for the long time. Accordingly, it is suggested that further study is needed to provide more information to the manufactures, who are seeking for the application of the extract to improve the anti-oxidant activity and stability of cosmetic products.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.27-33
• /
• 2016

This study investigated the effect of heat treatments on the quality characteristics of fresh-cut 'Romaine' lettuce by treating in hot water (45, 50, and $55^{\circ}C$) for 2 minutes. Sensory properties, respiration rate, ethylene production, microbial growth, browning index, total phenolics (TP), vitamin C, and antioxidant properties (DPPH, ABTS, and FRAP assays) of samples were evaluated after 5 days at $5^{\circ}C$. All heat treatment conditions tested in this study did not affect the change in TP after storage. Treatment at $45^{\circ}C$ enhanced respiration rate and ethylene production wheres decreased vitamin C content and antioxidant activities. There was no significant difference in browning index at $45^{\circ}C$ treatment. The rapid tissue softening occurred when treated with $55^{\circ}C$ hot water for 2 minutes. The $50^{\circ}C$ heat treatments exhibited the best quality index including texture and color, and inhibited microbial growth and browning after storage. In addition, the $50^{\circ}C$ heat treatment showed the highest vitamin C content and antioxidant activities (DPPH, ABTS, FRAP assay) after storage. Therefore, the $50^{\circ}C$ heat treatment can be used to maintain quality and antioxidant property of fresh-cut 'Romain' lettuce.

• Korean Journal of Ichthyology
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2009

The effect of water temperature on fasting and post-prandial total ammonia excretion (TAN) of the starry flounder Platichthys stellatus (mean body weigh : $42.4{\pm}3.4g$) was studied. The fasting and post-prandial TAN excretions were measured under three different water temperatures (10, 15 and $20^{\circ}C$) for 24 hours using a recirculating system. In each treatment three replicates were set up and total 45 fish were used. Fish were taken to the indoor aquarium, acclimated over 10 days at three temperatures, and transferred to TAN measuring system for measurements of TAN excretion at the same temperatures. After 3 days of starvation, fasting TAN excretion was measured at each temperature. To investigate post-prandial TAN excretion, fish were hand-fed to satiation level with a commercial diet containing 50.2% crude protein for 7 days, two times daily 08 : 00 and 16 : 00 h. The fasting and postprandial TAN excretion increased with increased water temperature (p<0.05). Mean fasting TAN excretion rates at 10, 15 and $20^{\circ}C$ were 10.9, 11.2 and $12.2mg\;TAN\;kg\;fish^{-1}\;h^{-1}$, respectively. The value at $20^{\circ}C$ was higher than those at 10 and $15^{\circ}C$ (p<0.05), but there was no significant difference between $10^{\circ}C$ and $15^{\circ}C$. Mean post-prandial TAN excretion rates at 10, 15 and $20^{\circ}C$ were 33.0, 43.4 and $55.3mg\;TAN\;kg\;fish^{-1}\;h^{-1}$, respectively. Two peaks of post-prandial TAN excretions were observed, and the second peak was always greater than the first. The post-prandial TAN excretion rate reached to the maximum after 10 hours from the first feeding at $10^{\circ}C$($45.3mg\;TAN\;kg\;fish^{-1}\;h^{-1}$), $15^{\circ}C$ ($64.5mg\;TAN\;kg\;fish^{-1}\;h^{-1}$) and $20^{\circ}C$ ($83.2mg\;TAN\;kg\;fish^{-1}\;h^{-1}$), respectively. The TAN loss for ingested nitrogen at $20^{\circ}C$ (48.8%) was higher than that for $10^{\circ}C$ (43.0%) and $15^{\circ}C$ (45.7%). This study provides empirical data for estimating ammonia excretion and managing culture management of starry flounder under given temperatures.

• Journal of Industrial Technology
• /
• v.6
• /
• pp.33-38
• /
• 1986

The aim of this study is to find out the relationships between the microstructures of SM45C(AISI1045) steel and fatigue crack propagation behaviour. Three microstructures such as (i) as received (fully annealed). (ii) water quenched and tempered, and (iii) oil quenched and tempered were used for fundamental mechanical testing and fatigue crack proagation test. The microstructures of (ii) and (iii) showed superior in tensile strength to (i). Resistance against fatigue crack propagation was higher in structure (i), while tensile properties were better in structures (ii) and (iii). It is believed due to that the enhancement of roughness of fracture surface obsered in structure (i) increases ${\Delta}Kth$ and lowers fatigue crack growth rate. However it does not necessarily mean the quenched and tempered structures (ii) and (iii) are undesirable for the engineering component because fatigue limit in low cycle test appears usually higher in the microstructures of higher strength.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.355-361
• /
• 2002

본 연구에서는 원적외선.열풍 복합건조특성을 구명하기 위하여 건조용량 150-500kg이고, 승강기, 상.하부스크류, 건조실, 템퍼링실, 송풍기 및 가열장치로 구성된 시뮬레이터를 제작하여 건조특성시험을 실시하였다. 그 결과를 요약하면 다음과 같다. 가. 열풍온도에 따른 곡온변화를 시험한 결과 열풍온도 45$^{\circ}C$일 때 곡온 32-33$^{\circ}C$를 유지하였으며, 48, 51$^{\circ}C$일 때는 곡온이 35$^{\circ}C$가 넘어서는 현상을 나타났다. 건조중 곡온이 35$^{\circ}C$를 넘어서게 되면 동할미 발생량이 많아지고 품질저하가 급격히 일어난다. 나. 템퍼링실의 온도편차가 2,5$^{\circ}C$ 정도로 고른 온도분포를 나타내었고, 버너 입구쪽과 템퍼링실 중앙지점에서 온도가 약간 높게 나타났으며, 원적외선방사체 표면온도분포는 열풍온도가 45$^{\circ}C$일 때 평균 17$0^{\circ}C$를 유지하였고, 48$^{\circ}C$, 51$^{\circ}C$일 때 각각 22$0^{\circ}C$, 23$0^{\circ}C$에서 유지하는 것으로 나타났다. 다. 원적외선방사체 길이방향으로 온도편차는 버너를 기준으로 해서 버너쪽에서 멀수록 온도가 높았고, 중간, 근거리 순으로 나타났다. 버너의 원거리쪽에서 온도가 높게 나타난 것은 원적외선방사체를 통과하는 열풍이 빠져나가도록 되어있는 열풍 유동관이 버너 원거리에 위치하고 있어 버너에 불꽃이 점화되면서 열풍이 방사체 끝쪽으로 일시 머물렀다가 배출되기 때문으로 판단된다. 라. 건조기의 송풍량을 요인으로 하여 건조속도와 건조에너지를 비교한 결과 송풍량이 30cmm일 때가 25cmm에서보다 약 33%의 건조속도가 증가되어 송풍량이 많을수록 건조속도가 빨라졌으나, 건조에너지는 1,391kcal/kg.water로 나타나 약 4.2%정도가 더 소요 되었다. 곡물순환속도를 요인으로 하여 비교 시험한 결과 곡물순환속도가 33kg/min일때가 26kg/min보다 약 25%의 건조속도가 증가되어 곡물의 순환속도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.3
• /
• pp.133-137
• /
• 1995

The objectives of this study were to determine the chemical composition of persimmon pickles and microorganisms associated with the manufacture of persimmon pickles. Moisture content was 80.04% and sugar content was 13.72%, but crude ash content was 4.26% which meant some of sodium chloride in soaking solution were permeated into fresh persimmon. Soluble tannin and total vitamin C contents were decreased from 635.45 mg% and 34.53 mg% to 81.04 mg% and 23.76 mg%, respectively. Free sugars contained in persimmon pickles were glucose, fructose and sucrose, 17 kinds of free amino acids were detected including glutamic acid (24.97 mg%), aspartic acid (24.02 mg%) and leucine (22.33 mg%). Microorganisms asociated with the manufacture of persimmon pickles were identified as Bacillus subtilis, B. cereus, B. pumilus, B. thuringiensis, Candida glabrata, C. guilliermondi and Hansenula cnomala, especially C. glabrata was the strain which caused the swelling of vacuum packages of persimmon pickles in retail stores.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.3
• /
• pp.35-49
• /
• 1996

This study was conducted to see variation of vital sign of hot and cool bath according to time, a questionnair survey and measurement was carried out for 32 students(sophomore) of department of physical therapy Andong Junior College on the 27th of June, 1995. The result were as follows: The average systolic blood pressure(SBP) of stability for 32 college students who were measured was 105.3mmHg, the average diastolic blood pressure(DBP) was 67.3mmHg, the average pulse frequency(PF) was 70.7(frequency/min), the average respiratory frequency (RF) was 15.6 (frequency/min), and the body temperature(BT) was $36.6^{\circ}C$. As time went on, SBP for 32 students who were measured in hot bath according to stability, 3 min, 6 min, 9 min, and 12 min was decreased(105.15 mmHg, 104.69mmHg, 104.24 mmHg, 103.03 mmHg, and 96.69 mmHg)(P=0.3006). SBP was decreased in cool bath, too(105.15 mmHg, 103.33 mmHg, 103.33 mmHg, and 100.91 mmHg), but it at 12 min was a little higher(l03.09 mmHg)(P=0.7566). As time went on, DBP according to stability, 3 min, 6 min, 9 min, and 12 minutes was decreased in hot bath(66.82 mmHg, 65.45 mmHg, 64.54 mmHg, 63.03 mmHg, and 59.39 mmHg)(P=0.0906). It was similar in cool bath(66.82 mmHg, 67.87 mmHg, 68.48 mmHg, 67.87 mmHg, and 68.78)(P=0.9654). As time went on, PF was significantly increased in hot bath(70.42 times, 86.96 times, 93.57 times, 99.30 times, and 101.78 times)(P=0.0001). It was a little increased in cool bath, too (70.42 times, 70.85 times, 71.63 times, 71.06 times, and 71.45 times)(P=0.9803). As time went on, RF was significantly increased in hot bath(15.75 times, 19.09 times, 22.09 times, 24.94 times, and 26.48 times)(P=0.0001). I t in cool bath of stability, 3 min, and 6 min was a little increased(15.75 times, 19.30 times, 19.39 times), but it in 9 min(18.67 times), and 12 min(18.09 times) was a little decreased(P=0.0176). As time went on, BT was significantly increased in hot bath($36.63^{\circ}C,\;37.45^{\circ}C,\;37.81^{\circ}C,\;38.12^{\circ}C,\;38.33^{\circ}C$)(P=0.0001). It was a little increased in cool bath of stability and 3 min($36.63^{\circ}C,\;37.40^{\circ}C$), but others are similar($37.33^{\circ}C,\;37.37^{\circ}C$, and $37.36^{\circ}C$)(P=0.0001). It was revealed by this study, SBP and DBP according to time in hot and cool bath were decreased. PF, RF, and BT in hot bath were higher, RF and BT in cool bath were higher too. but PF was similar.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.94-104
• /
• 2009

It is urgently required to develop the production of fermentation-heat energy from the waste agricultural and forest biomass and its effective heat exchanging system for the supply of warm water to rural households and greenhouses. In this study 3 helical-type and 1 plate-type heat exchangers using 3 different waste biomasses [e.g. hardwood (HW) sawdust (100%), softwood (SW) sawdust : HW sawdust (50 : 50) and HW sawdust : grass (90 : 10)] were applied in order to find out the best heat recovery system. The heat exchanger was basically considered to improve the overall heat recovery efficiency, to minimize heat loss and to simplify manufacturing, assembling and breaking up the fermenting beds. The helical-type heat exchanger (HX-H3) installed in fermenting bed of HW sawdust : grass (90 : 10) showed relatively higher temperature profiles, in particular mid- and upper-parts than lower and surface parts during 45-day fermentation process. The maximum temperature was ranged from $40^{\circ}C$ to $65^{\circ}C$ with average $60^{\circ}C$. The water temperature of tank outlet was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. By the way plate-type one (HX-P) installed in same biomass compositional fermenting bed showed $64.5{\sim}76.5^{\circ}C$ at center part, and $43{\sim}56^{\circ}C$ and $42{\sim}58^{\circ}C$, water tank and tank outlet temperatures, respectively, during 100 day measurement. It could be concluded that the plate-type heat exchanger (HX-P) provides not only the effective heating for the rural households and greenhouses, but also having the best heat recovery performance, easy manufacturing, assembling and breaking up the systems.