• ETRI Journal
• /
• 제31권1호
• /
• pp.80-82
• /
• 2009

In this letter, a new intra-block coding mode is presented to improve the coding efficiency for band-limited signals. A band-limited block is sub-sampled, and the sub-sampled signal is coded on the basis of the conventional prediction/transform coding. The rest of the samples are reconstructed by interpolation at the decoder side without any side information. Experimental results show that the proposed algorithm achieves coding gains of 2.7% for common intermediate format (CIF), 4.29% for quarter CIF, and 6.39% for 720p60 sequences against the H.264/AVC JM10.2 reference software.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.689-692
• /
• 1999

This paper describes a 10-bit 75-MHz CMOS current-mode DAC designed for 0.8${\mu}{\textrm}{m}$ double-poly double-metal CMOS technology. This D/A converter is implemented using a current cell matrix that can drive a resistive load without output buffer. In the DAC. a current source is proposed to reduce the linearity error caused by the threshold-voltage variations over a wafer and the glitch energy caused by the time lagging, The integral and differential linearity error are founded to be within $\pm$0.35 LSB and $\pm$0.31 LSB respectively. The maximum conversion rate is about 80 MS/s. The total power dissipation is 160 ㎽ at 75 MS/s conversion rate.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.55-61
• /
• 1994

The multiple valued logic(MVL) circuit with ROM type using current mode CMOS is presented in this paper. This circuit is composed of the multiple valued-to-binary(MV/B) decoder and the selection circuit. The MV/B decoder decodes the single input multiple valued signal to N binary signal, and the selection circuits is composed N$\times$N array of the selecion cells with ROM types. The selection cell is realized with the current mirror circuits and the inhibit circuits. The presented circuit is suitable for designing the circuit of MVL functions with independent variables, and reduces the number of selection cells for designing the circuit of symmetric MVL functions as many as {($N^2$-N)/2}+N. This circuit possess features of simplicity. expansibility for array and regularity, modularity for the wire routing. Also, it is suitable for VLSI implementation.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.60-66
• /
• 1994

The scattering problem by E-polarized plane wave with oblique incidence on a tapered resistive strip grating with infinite resistivity at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density is expanded in a series of Ultraspherical polynomials of the zeroth order. The expansion coefficients are calculated numerically in the spectral domain, the numerical results of the geometricoptical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing. It is found out that these sharp variation points are due to the transition of higher modes between the propagation mode and the evanescent mode.

• 전자공학회논문지A
• /
• 제31A권9호
• /
• pp.53-63
• /
• 1994

In indoor radio systems, vehicular communication systems, and land mobile systems, a very important problem is that of maintaining stable communications at all locations. Therefore solutions for the indoor propagation problem are important aspects of the mobile communication system. leaky coxial cables are finding increasing use in communications systesm involving mines, tunnels, tailroads, and highways, and in new obstacle detection, or guided radar, schemes for ground transportation and perimenter surveilance. In this paper a leaky coaxial cable having periodic slots in the outer conductor is described to obtain the propagation modes in the various environments. We use aneccentric cylindrical model to develop the theory for surface-wave propagation on the cable. Numerical Results are also included for the propagation constants, field distribution and current distribution. First, we derive the electromagnetic equation for leaky coaxial cable having symmetrical periodic slots using mode-matching method and Floquet's theorem, and then find various modes, propagation constants, field distribution, etc.

• 전자공학회논문지A
• /
• 제31A권9호
• /
• pp.139-145
• /
• 1994

InGaAsP/InP PBH-DFB-LD emitting at 1.55${\mu}$m wavelength has been fabricated for 2.5Gbps optical fiber communcations. For fabrication of PBH-DFB-LD, Interference expose for grating formation 3-step LPE epitaxial growth were used. Fabricated PBH-DFB-LD operates in single longitudinal mode with larger than 35dB SMSR and wider than 3dB bandwidth of 3GHz. A 8${\mu}$m mesa structure was introduced by channel etching to reuce parasitic capacitance. To reduce pad capacitance, we designed a small electrode. 0.27mW/mA in the case of spectrum shows single logitudinal mode operation with larger thatn 30dB SMSR measured at 5mW.

• 한국대기환경학회지
• /
• 제7권1호
• /
• pp.31-40
• /
• 1991

This study shows the correlation between $NO_x$ emission in the exhaust gas and various operation factors of dual fuel engine for Co-generation system. General tendency was shown that the thermal efficiency was lowered by the change of operation factors. However these were not confirmed on this experiment. Increasing T4 temperature (exhaust gas temperature at turbo-charger inlet) reduces $NO_x$ emission rate. The higher T4 temperature requires lower excess air as the excess air ratio is controlled by T4 temperature on gas mode operation. Another tendency was that $NO_x$ emission rate is reduced in case of increasing boost air temperature, quantity of pilot oil or bypassing flue gas through the exhaust gas boiler. The diameter of the fuel injection nozzle was changed smaller than design value and the injection timing was readjusted. Thus $NO_x$ emission rate could be reduced as retarding injection timing and changing hole diameter of fuel injection nozzle, however maxium engine out-put was decreased by changing fuel nozzle on the diesel mode operation.

• 품질경영학회지
• /
• 제36권1호
• /
• pp.31-39
• /
• 2008

This paper proposes a method of estimating the lifetime distribution at use condition for constant stress accelerated life tests when an infant-mortality failure mode as well as wear-out one exists. General limited failure population model is introduced to describe these failure modes. It is assumed that the log lifetime of each failure mode follows a location-scale distribution and a linear relation exists between the location parameter and the stress. An estimation procedure using the expectation and maximization algorithm is proposed. Specific formulas for Weibull distribution are obtained. An illustrative example and the simulation results are given.

• 대한의용생체공학회:의공학회지
• /
• 제6권1호
• /
• pp.31-36
• /
• 1985

In this paper, we describe the digital signal-processing for ultrasonic echo signals for the improvement of range resolution. The problem is to find the magnitude of analytic signals that are consistent with the arrival-rate of energy. It is also baaed upon the fact that the shapes of echo signals do not change, although the ampli- tudes and widths of the echo signals become smaller and wider than those of the transmitted signals. We have made the improvement in range resolution by using the quadrature-low pass filter and the area filter which are made on the basis of the theory discussed above.

• 대한조선학회지
• /
• 제31권3호
• /
• pp.52-57
• /
• 1994

본 개발에서는 주로 진동응답의 추정법에 대하여 검토하고 큰 성과를 얻었다. 이를 실제 설계에 활용해 나가는 것이 앞으로의 기본적인 과제이다. 또 이를 앞으로도 계속 개발해 나가기 위해서 는 다음과 같은 개발과제들을 들 수 있다. 1) 진동응답추정 .계산model 본 계발에는 Oil tanker와 산적화물선의 in-put generator(I/G)을 개발하였다. 이 이외의 선종 에 대하여도 본 개발에 의한 방법을 적용하게 되면 보다 정도 높은 계산 model로 새로이 refine해 나갈 수가 있다. .실선mode 해석전용 본 개발에 의하여 얻은 실선 mode해석 방법에 의하면 실선 계측으로부터 정확한 진동질량(m) 과 감쇄계수(d)를 얻게 된다. 이와 같은 m값과 d값의 자료를 더 축적하게 되면 진동응답 계 산정도를 한층 더 높일 수 있다. 2) 진동 제어 .종래의 설계방법과 본 개발에 의한 계산방법을 종합 적용하게 되면, 최적의 구조설계의 실용화 와 진동의 제어가 가능하게 될 것이다. .Enging, propeller 자체의 기진력을 경감시키는 연구는 본 개발에 들지 않고 앞으로의 과제로 남는다. .본 신형 주기방진stay의 개발은 본 진동제어의 idea에 도입하게 되면 또 다른 새로운 개발이 가능하다. .종래의 재료와 새로운 고성능 재료를 조합하게 되면 진동재어재료로서의 실용화가 가능하다.