Transactions on Electrical and Electronic Materials
/
제12권3호
/
pp.115-118
/
2011
Process characterization of the chemical mechanical polishing (CMP) process for undensified phosphosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been addressed to experimenters to understand the relationship between input variables and responses of interest in a simple and efficient way. It is typically beneficial for determining the adequate size of experiments with multiple process variables and making statistical inferences for the responses of interests. Equipment controllable parameters to operate the machine include the down force (DF) of the wafer carrier, pressure on the backside of the wafer, table and spindle speed (SS), slurry flow rate, and pad condition. None of them is independent; thus, the interaction between parameters also needs to be indicated to improve process characterization in CMP. In this paper, we have selected the five controllable equipment parameters, such as DF, back pressure (BP), table speed (TS), SS, and slurry flow (SF), most process engineers recommend to characterize the CMP process with respect to material removal rate (RR) and film uniformity as a percentage. The polished material is undensified PSG. PSG is widely used for the plananization in multi-layered metal interconnects. We identify the main effect of DF, BP, and TS on both RR and film uniformity, as expected, by the statistical modeling and analysis on the metrology data acquired from a series of $2^{5-1}$ fractional factorial design with two center points. This revealed the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that the process control based on better understanding of the process is the key to success in semiconductor manufacturing, typically when the wafer size reaches 300 mm and is continuously scheduled to expand up to 450 mm in or little after 2012.
TSV(through silicon via)는 긴 종횡비를 갖는 패턴에 Cu, Ta, Ti을 높은 conformality를 갖도록 증착하는 공정이다. Magnetron cathode의 자석 배열 설계는 target 물질 종류에 따라서 multitrack, water drop type등이 있으며 target과 substrate 사이의 공간에 플라즈마를 형성시켜서 기판에 이온 입사량을 늘린 후 기판 바이어스를 이용하여 이온 충돌, re-sputtering을 통한 재증착 과정을 통해 치밀한 금속 박막을 연속적으로 형성할 수 있도록 하는 것이 목적이다. 또한 sputter가 사용되고 있는 분야에 효율을 증대시키고, 증착되는 막의 품질향상을 위해 UBMS를 사용하고 있으며, 산업에 사용되어 지는 300 mm wafer용 시스템은 제작비가 약 10억 원 정도 소요되며 다양한 테스트를 진행하기 위해선 많은 비용이 소요된다. 따라서 비용과 소요시간을 줄여 다양한 테스트를 위해 소규모 플라즈마 시스템을 설계하게 되었다. 61 l/sec 터보 분자 펌프와 다이아프램 펌프를 기초로한 TMP station에 2.75 인치 CF flange가 장착된 6 way cross를 main 챔버로 활용하고, 작은 size의 unbalanced magnetron cathode를 제작, 장착한 다음 6 way cross 주변에 전자석을 적절히 배치하여 300 mm wafer system에서와 동일한 물리적 현상을 테스트 할 수 있도록 하였다. Fig1. (a) UBMS system의 사진을 나타내었고, (b)에는 6 way cross 내부에 발생된 플라즈마의 형상을 나타내었다. 전원 장치는 Advanced Energy사의 MDX-1.5K DC power supply를 사용하였고, 방전 전압 - 전류 관계의 가스 압력에 따른 plasma 현상과 magnetron 배율에 따른 plasma 현상 그리고 전자석에 의한 영향을 주로 관찰 하였다.
International Journal of Control, Automation, and Systems
/
제3권2호
/
pp.252-257
/
2005
In this work, we propose a simple but efficient method to design a target temperature trajectory for pulling speed tracking control of the crystal grower in the Czochralski crystallization process. In the suggested method, the model predictive control strategy is used to incorporate the complex dynamic effect of the heater temperature on the pulling speed into the temperature trajectory design quantitatively. The feedforward trajectories designed by the proposed method were implemented on 200 mm and 300 mm silicon crystal growers in the commercial Czochralski process. The application results have demonstrated its excellent and consistent tracking performance of pulling speed along whole bulk crystal growth.
다중 음극 전자빔을 이용한 새로운 플라즈마 소스를 설계하고 제작하였다. 대면적의 플라즈마를 발생시키기 위해 다중 음극을 채택하였다. 다중 음극 전자빔 플라즈마 소스(multi-cathode electron beam plasma source, MCEBPS)를 이용하여 300mm 또는 그 이상의 직경을 가진 웨이퍼에 안정한 플라즈마를 생성시킬 수 있었다. 텅스텐 필라멘트를 음극으로 사용하였다. 직경 320mm의 넓이에서, plasma potential $V_p$와 floating potential $V_f$ 모두 균일하게 유지되었고 $V_p와 V_f$의 차이도 낮은 값으로 나타났다. 플라즈마 밀도는 약 $10^{10} cm^{-3}$ 정도로 측정되었고 반경걸에 따른 편차는 작게 나타났다.
Objectives: This study aimed to elucidate the physicochemical properties of silica powder and airborne particles as by-products generated from fabrication processes to reduce unknown risk factors in the semiconductor manufacturing work environment. Materials and Methods: Sampling was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. Thirty-two powder and airborne by-product samples, diffusion(10), chemical vapor deposition(10), chemical mechanical polishing(5), clean(5), etch process(2), were collected from inner chamber parts from process and 1st scrubber equipment during maintenance and process operation. The chemical composition, size, shape, and crystal structure of silica by-product particles were determined by using scanning electron microscopy and transmission electron microscopy techniques equipped with energy dispersive spectroscopy, and x-ray diffractometry. Results: All powder and airborne particle samples were composed of oxygen(O) and silicon(Si), which means silica particle. The by-product particles were nearly spherical $SiO_2$ and the particle size ranged 25 nm to $50{\mu}m$, and most of the particles were usually agglomerated within a particle size range from approximately 25 nm to 500 nm. In addition, the crystal structure of the silica powder particles was found to be an amorphous silica. Conclusions: The silica by-product particles generated from the semiconductor manufacturing processes are amorphous $SiO_2$, which is considered a less toxic form. These results should provide useful information for alternative strategies to improve the work environment and workers' health.
일반적으로 결정질 실리콘 태양전지에서 표면에 텍스쳐링(texturing)하는 것은 알칼리 또는 산성 같은 화학용액을 사용하고 있다. 그러나 실리콘 부족으로 실리콘의 양의 감소로 인하여 웨이퍼 두께가 감소하고 있는 추세에 일반적으로 사용하고 있는 습식 텍스쳐링 방법에서 화학용액에 의한 많은 양의 실리콘이 소모되고 있어 웨이퍼의 파손이 심각한 문제에 직면하고 있다. 그리하여 습식 텍스쳐링 방법보다는 플라즈마로 텍스쳐링할 수 있는 건식 텍스쳐링 방법인 RIE (reactive ion etching) 기법이 대두되고 있다. 그리고 습식 텍스쳐링으로는 결정질 실리콘 태양전지의 반사율을 10% 이하로는 낮출 수가 없다. 다결정 실리콘 웨이퍼 표면에 텍스쳐링을 하기 위하여 125 mm 웨이퍼 144개를 수용할 수 있는 대규모 플라즈마 RIE 장비를 개발하였다. 반사율을 4% 이하로 낮추기 위하여 공정가스는 $Cl_2$, $SF_6$, $O_2$를 기반으로 RIE 텍스쳐링을 하였고 텍스쳐링의 모양은 공정가스, 공정시간, RF 주파수 등에 의해 조절이 가능하였다. 본 연구에서 RIE 공정을 통하여 16.1%의 변환효율을 얻었으며, RF 주파수가 텍스쳐링의 모양에 미치는 영향을 살펴보았다.
플라즈마에 노출된 재료 표면의 온도 증가는 다음과 같은 요인에 의해서 결정된다. 이온의 충돌에 의한 역학적 에너지, 이온의 중성화, 라디칼의 안정화에 의한 에너지 방출(잠열, latent heat), 플라즈마에서 방출된 빛의 흡수. 이중 식각을 위한 기판 바이어스에 의해서 주로 결정되는 이온 충돌 에너지와 잠열의 방출이 300 mm wafer용 유도 결합 플라즈마 식각 장치에서 소스 전력과 바이어스 전력에 따라서 어떻게 변화하는지 전산 유체 역학 모사 프로그램인 CFD-ACE를 이용하여 상용 식각 장비인 AMAT사의 DPS II를 대상으로 온도 분포의 변화를 계산하였다. 실험 결과와 비교를 위하여 다섯 곳에(상, 하, 좌, 우, 중심) 열전대를 부착한 온도 측정 웨이퍼를 기판의 위치에 설치하고 여러 가지 실험 조건에 대해서 온도의 변화를 측정하였다. Ar 10 mTorr에서 2열 병렬 안테나의 전력을 300 W에서 시간에 따른 온도의 변화를 측정하였다. 이때 wafer의 평균 온도는 $28.9^{\circ}C$에서 $150^{\circ}C$까지 12분 내에 상승하였으며 최고 온도에 도달한 다음에는 거의 일정하게 유지 되었다. Si의 식각에서 온도의 영향을 가장 크게 받는 반응은 F 라디칼에 의한 Si의 직접 식각이며 Arrhenius 식의 형태로 표현하면 0.116*exp (-1250/T)의 형태로 된다. 문헌에 보고된 계수를 이용해서 $29^{\circ}C$의 식각 속도와 플라즈마에 의한 가열 최고 온도인 $150^{\circ}C$ 때의 값을 비교해보면 3.3배의 차이가 난다. 따라서 4%내의 식각 균일도를 목표로 하는 폴리 실리콘 게이트 식각 장비의 설계에서는 플라즈마에 의한 가열 불균일을 상쇄 할 수 있는 히터와 냉각 구조의 최적 설계가 필요하다.
In this study, a micro-glucose sensor was fabricated by micromachining technology and its sensing characteristics were investigated. The 7740 pyrex glass was used as the bottom substrate and anisotropically etched silicon wafer was used as the top substrate. The size of the fabricated microchip is 1.58${\times}$1.58mm$^2$. It is shown that output current exhibits a linear change according to glucose concentration (100 mM ∼ 300 mM). It is also shown that the response time for glucose was within 240 sec. It was followed by a saturation trend within 50 sec. The g1ucose sensor with Fc$\^$+/ exhibits relatively higher sensitivity than that without Fc$\sub$+/ for output current.
본 연구에서는 바이오 및 환경 분야에 적용 가능한 미세 유체소자 제작에 있어서 4" 유리 / 유리 웨이퍼접합을 시도하였으며, 접합결과 90%이상의 접합면적을 보였다. 접합된 샘플을 산 및 알카리 조건에 따른 인장시험결과 모든 조건에서 약 $2kgf/mm^2$ 이상의 접합강도를 보였으며 파괴는 접합면이 아닌 모재에서 발생되었다. 또한 미세유체소자 제작에 있어서 초음파를 이용하여 유리를 가공하였으며, 폭 $300{\mu}m$, 깊이 $200{\mu}m$의 미세채널을 제작하였다.
최근 반도체 시장의 300 mm/450 mm wafer 급 이상의 첨단공정에서는 진공 펌프의 대용량화 및 에너지 절감을 위한 저소비 전력화 요구와 함께 공정 중 진공 펌프의 성능저하 및 이상 징후 발생 감지 혹은 예지 요구 및 예지 보수 기술이 높아지고 있는 추세이다. 이에 현재 경험에 의존하던 진공 펌프의 predictive and preventative maintenance (PPM) 주기 설정 기술이 매우 필요함을 알 수 있다. 본 연구에서는 지식경제부에서 지원하는 산업원천기술개발사업에 참여기관으로 수행하면서 한국표준과학연구원에서 주관기관으로 진행하는 스마트형 진공 배기 진단 제어 시스템 개발 과제를 통해 (유)우성진공에서 자체 개발하는 저진공 펌프에 적용 예정중인 smart형 PMS에 대해 소개하고자 한다. 진공 환경을 조성하는 핵심장치인 진공 펌프 상태는 진공 공정 환경 조성에 가장 주요한 변수이므로 이에 따른 상태 진단 기술은 진공 공정 제어 정밀도와 공정 신뢰성 확보에 필수적이며, (유)우성진공에서 자체 개발하는 드라이펌프 및 스크류펌프 등 저진공 펌프의 정밀한 실시간 상태진단을 통해 예지 보수 기술 및 신뢰성을 확보하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.