• Corrosion Science and Technology
• /
• v.18 no.5
• /
• pp.168-174
• /
• 2019

The sol-gel methodology has been applied successfully in the synthesis of a novel hybrid coating based on dimethoxymethyl-n-octadecylsilane precursor. The newly synthesized parent coating was functionalized further with two commercially-available corrosion-inhibitive pigments Moly-$white^{(R)}$ 101-ED and Hfucophos $Zapp^{(R)}$, applied to mild steel panels, and immersed continuously in 3.5% NaCl electrolytic solution for 288 h. The corrosion protection performance of the prepared functional coatings was evaluated using electrochemical impedance spectroscopy (EIS) and DC polarization techniques. An enhancement in the barrier properties has been revealed from the electrochemical characterization data of the hybrid films, in comparison with untreated mild steel substrates following long-term immersion in 3.5% NaCl. The corrosion resistance properties of the newly developed coatings over mild steel substrates found to be largely dependent on the type of the loaded inhibitive pigment in which the Moly-white inhibitor has a positive impact on the corrosion protection performance of the parent coating, while an opposite behavior was observed upon mixing the base polymeric matrix with the commercially-available Zapp corrosion inhibitor.

• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.109-115
• /
• 1998

Tri-cresyl phosphate(TCP) was synthesized by reaction of phosphorus chloride with mixed cresol(mixture of m-cresol, p-cresol, and others) in the presence of $AlCl_3$. Some of unwanted products and unreactants colored TCP. In order to separate TCP from these, vaccume distillation was carried twice, but colorless TCP could not be producted. Separation of unwanted materials by 2% NaOH solution was introduced before first and second distillation and optimal separation conditions such as NaOH concentration, mixing volume ratio, mixing time, and rpm were investigated for new batch separation and production of colorless TCP Optimal conditions were 2% NaOH solution, 35% mixing volume ratio of 2% NaOH solution, 1.5 hours of mixing time, and 20 rpm.

• Korean Journal of Microbiology
• /
• v.3 no.2
• /
• pp.9-14
• /
• 1965

The enzyme-producing potentials of industrially important strains of Aspergillus spp. were studied. Irradiation of three original isolates of Aspergillus oryzae to ultra-violet rays resulted in the production of mutants which differed from the parent riboflavin and vitamin $B_{12}$ in culture media. 1. Irradition three strains of Aspergillus oryzae to ultraviolet light produced mutants and two strains of them were selected for soy sauce brewing. 2. The two strains are the physiological mutants of Aspergillus oryzae. Both were found to have superior enzyme activity to their relatives. 3. Aspergillus oryzae UV-induced mutant 172-722 and 569-713 were more powerful than others in the production of riboflavin and vitamin $B_{12}$. The enzyme activity of these strain were high and decreased only slightly even in 20 percent solution of NaCl. 4. Aspergillus oryzae UV-induced mutant 172-722 had more powerful protease producibility in wheat bran media than in modified Czapek's solution. On the contrary, Aspergillus oryzae UV-induced mutant 569-713 had more powerful producibility of saccharogenic and dextrinogenic amylase in modified Czapek's solution than in mold bran. 5. Aspergillus oryzae UV-induced mutant 172-722 formed the spore rapidly and Aspergillus oryzae UV-induced mutant 569-713 did ordinarily. 6. It is found from the results that Aspergillus oryzae UV-induced mutant 172-722 is valuable material for the manufacture of soy sauce because of its high protease activity in 20 percent solution of NaCl. Aspergillus oryzae UV-induced mutant 569-713 is suitable for soy bean mash and for fermented red pepper sauce for its high saccharogenic and dextrinogenic amylase activity in 20 percent solution of sodium chloride.

• Journal of fish pathology
• /
• v.8 no.2
• /
• pp.111-118
• /
• 1995

This experiment was carried out in order to elucidate the effect of NaCl(0.85%) acclimation on congestion symptoms in central venous sinuses(CVS) of gill filaments and on the alteration of blood constituents in cultured eels for 1, 2, 3, 4, 5, 6 and 7days after handling stress. After giving a handling stress on eels, the frequency of gill congestion was about 90%. It gradually decreased to 40% on the 3rd day, then increased to 60% on the 7th day in NaCl(0.85%) acclimation. The values of haematocrit(Ht), methemoglobin(Met-Hb), glucose (GLU), calcium($Ca^{++}$), lactic dehydrogenase(LDH), glutamic pyruvic transaminase (GPT) and glutamic oxaloacetic transaminase(GOT) were lower than those of the control, whereas magnesium($Mg^{++}$) and haemoglobin(Hb) were higher than the control. However total protein(Tp) and albumin (ALB) levels similar to the control. When the fish after giving a handling stress were cultured in NaCl-free water as a control, the frequency of gill congestion and the value of blood components showed a similar pattern to that obtained from the NaCl acclimated experiments. However, in the early period(1-3day) after handling stress, NaCl acclimating slightly helped the natural tendancy of recovery. These results suggest that the frequency of gill congestion is not always reduced over the whole period of NaCl acclimation. However, the acclimation to NaCl solution may be a somewhat useful therapy for the gill congestion in stressed eels.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.810-815
• /
• 2011

Concentrated water discharged from seawater desalination process contains a high concentration of $Na^+$ ion. Electrolysis was applied to synthesize NaOH solution from the highly concentrated NaCl solution. The effect of various operating parameters of composited laboratory-scale chlor-alkali (CA) membrane cell was investigated. The operating parameters such as membrane types (CIMS and Nafion membranes), pretreatment of the membrane, flow rate (73 mL/min~200 mL/min), initial $Na^+$ ion concentration (1.5 M, 3M and 5 M) and current (1.5A and 2A) were evaluated. It was observed that synthesis efficiency of NaOH solution with CIMS membrane was higher than that with Nafion membrane, but the durability of CIMS membrane on $Cl_2$ gas was poor. The synthesis efficiency of NaOH solution increased with increasing initial $Na^+$ ion concentration and current, while the efficiency decreased with increasing flow rate using Nafion membrane.

• Natural Product Sciences
• /
• v.27 no.1
• /
• pp.36-44
• /
• 2021

The essential oils from the aerial parts (leaves and flowers) of Spiraea hypericifolia L. (Rosaceae), collected in Northern Kazakhstan, were obtained by distillation in two dispersion media (distilled water and 15% NaCl solution). The chemical composition of the essential oils was evaluated by GC-MS for the first time. The yield of the essential oil was 0.04% (in fresh growth conditions) and 0.02% (in dry growth conditions) respectively regardless of which dispersion media (H2O or 15% NaCl solution) was used at the isolation of essential oil. The main compounds were aliphatic hydrocarbons (alkanes) (40.6-53.2%), aldehydes (8.4-17.4%), diterpenoids (9.1-16.7%) and ketones (6.2-8.7%). Content of monoterpenoids was depended on dispersion media (2.2-3.6% where H2O was dispersion media and 8.4-8.5% where 15% NaCl solution was dispersion media). n-Heneicosane (17.4-34.1%) and n-tricosane (14.3-19.5%) were the main constituents of the essential oil of S. hypericifolia. There were many insects from different classes in S. hypericifolia at flowering. Important components such as α-methylene-γ-butyrolactone (0.8-2.8%), benzyl cyanide (0.7-1.1%), β-damascenone (1.2-2.9%), (E,E)-4,8,12-trimethyl-1,3,7,11-tridecatetraene (1.8-2.7%), β-ionone (0.5-1.8%) and others were detected in small amounts.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.324-332
• /
• 2009

This study aimed to measure chemical resistance properties of the microfiltration flat-sheet membrane made by Chlorinated Polyvinyl Chloride (CPVC) with respect to the immersed time. The solutions of effective chlorine 0.5 wt% NaClO, HCl 1 wt% and pH 4 buffer under acidic condition, NaOH 4 wt% and pH 10 buffer under alkine condition were used as widely applied chemicals for membrane washing. The CPVC membrane samples were immersed in the above chemical solutions during 1, 3, 5 and 10 days at 5, 25 and $50^{\circ}C$, respectively. After then, the tensile strength and elongation at break as the chemical durability for the samples were measured and evaluated. The tensile strength decreased within 5% at $5^{\circ}C$, but decreased up to 17% at 25 and $50^{\circ}C$ for 0.5 wt% NaClO solution mainly used for membrane cleaning. The chemical resistance of CPVC membrane was good enough for HCl 1 wt% and pH 4 buffer acid solutions, but the most vulnerable for NaOH 4 wt% solution.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.366-369
• /
• 1971

The cation exchange chromatographic method for the analysis of Babbitt metal has been studied. The quantitative separation of the mixture of Sb, Cu, Pb, and Sn ions has been obtained by elution, through 5cm column of resin, Rexyn 101 (Na form, 100~200 mesh), using 0.1 M NaCl solution for Sb, pH 4.5 and pH 7 solution of 0.01 M Na-Citrate + 0.1 M $NaNO_3$ for Cu and Pb, and 2NHCl solution for Sn as eluent.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.577-581
• /
• 2011

Silicon nanoparticles have attracted a great deal of scientific interests due to its intense photoluminescence in the visible spectral region and its potential applications in biological fluorescence maker, RGB (red, green, blue) display, photonics and photovoltaics etc. Practical applications making use of optical and physicochemical properties of Si nanoparticles requires an efficient synthetic method which allows easy modulation of their size, size distribution as well as surface functionalities etc. In this study, a one-pot solution reduction scheme is attempted to prepare alkyl-terminated Si nanoparticles (<10 nm) with Si precursors, (Octyl)$SiCl_3$ or mixture of (Octyl)$SiCl_3$ and $SiCl_4$, containing alkyl-groups using Na(naphthalide) as reducing agent. The surface capping of Si nanoparticles with octyl-groups as well as Si nanoparticle formation was achieved in one-pot reaction. The hexane soluble Si nanoparticles with octyl-termination were in the range of 2-10 nm by TEM and some oxide groups (Si-O-Si) was present on the surface by EDS/FTIR analyses. The optical properties of Si nanoparticles measured by UV-vis and PL evidenced that photoluminescent Si nanoparticles with alkyl-termination was successfully synthesized by solution reduction of alkyl-containing Si precursors in one-pot reaction.

• Journal of Environmental Science International
• /
• v.19 no.9
• /
• pp.1143-1152
• /
• 2010

The purpose of this study is to degradation of Rhodamine B (RhB, dye) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the electro-generation of OH radical) in solution using boron doped diamond (BDD) electrode. The effects of applied current (0.2~1.0 A), electrolyte type (NaCl, KCl, and $Na_2SO_4$) and electrolyte concentration (0.5~3.0 g/L), solution pH (3~11) and air flow rate (0~4 L/min) were evaluated. Experimental results showed that RhB and RNO removal tendencies appeared with the almost similar thing, except of current. Optimum current for RhB degradation was 0.6 A, however, RNO degradations was increased with increase of applied current. The RhB and RNO degradation of Cl type electrolyte were higher than that of the sulfate type. The RhB and RNO degradation were increased with increase of NaCl concentration and optimum NaCl dosage was 2.5 g/L. The RhB and RNO concentrations were not influenced by pH under pH 7. Optimum air flow rate for the oxidants generation and RhB and RNO degradation were 2 L/min. Initial removal rate of electrolysis process was expressed Langmuir - Hinshelwood equation, which is used to express the initial removal rate of UV/$TiO_$2 process.