• 제목/요약/키워드: 3-Way Injection Material

검색결과 13건 처리시간 0.03초

플라스틱 주사기와 놈젝 주사기를 이용한 방사성 의약품의 투여율 측정 비교 (Comparison of Radiopharmaceutical Dosing Rate Measurements Using Plastic Syringes and Norm-ject Syringes)

  • 손상준;박정규
    • 한국콘텐츠학회논문지
    • /
    • 제20권10호
    • /
    • pp.395-400
    • /
    • 2020
  • 2019년 10월부터 2020년 1월까지 대구P병원 핵의학과에서 SPECT 검사를 위한 입원환자 중 3-way 주사재료를 장착하고, 99mTc 표지화합물을 투여하였던 주사기 120EA를 대상으로 하였다. 플라스틱 주사기 사용시 희석 횟수에 따른 평균 투여율은 99mTc-ECD가 90.87±11.08로 가장 높았으며, 99mTc-DMSA가 75.28±7.43으로 가장 낮았다. 놈젝주사기 사용 시 희석횟수에 따른 평균 투여율은 99mTcO4가 93.58±7.96으로 가장 높았으며, 99mTc-DMSA가 91.60±6.07로 가장 낮았다. 99mTc-DMSA의 플라스틱 주사기와 놈젝주사기의 차이가 나는지 독립표본 t-검정 결과, 유의확률은 0.007로서 플라스틱 주사기와 놈젝 주사기의 평균은 다르므로 통계적으로 매우 유의하게 나타났다(p<0.01). 특히 신장검사에 사용하는 99mTc-DMSA는 소아 환자에게 주로 사용되는 방사성의약품으로 정확한 투여량이 중요하여 일반 플라스틱 주사기보다 놈젝 주사기의 사용이 필요하다고 판단된다.

Experimental observation and numerical simulation of cement grout penetration in discrete joints

  • Lee, Jong-Won;Kim, Hyung-Mok;Yazdani, Mahmoud;Lee, Hangbok;Oh, Tae-Min;Park, Eui-Seob
    • Geomechanics and Engineering
    • /
    • 제18권3호
    • /
    • pp.259-266
    • /
    • 2019
  • This paper presents a comparison between experimental measurements and numerical estimations of penetration length of a cement grout injected in discrete joints. In the experiment, a joint was generated by planar acryl plates with a certain separation distance (; aperture) and was designed in such a way to vary the separation distances. Since a cement grout was used, the grout viscosity can be varied by controlling water-cement (W/C) ratios. Throughout these experiments, the influence of joint aperture, cement grout viscosity, and injection rate on a penetration length in a discrete joint was investigated. During the experiments, we also measured the time-dependent variation of grout viscosity due to a hardening process. The time-dependent viscosity was included in our numerical simulations as a function of elapsed time to demonstrate its impact on the estimation of penetration length. In the numerical simulations, Bingham fluid model that has been known to be applicable to a viscous cement material, was employed. We showed that the estimations by the current numerical approach were well comparable to the experimental measurements only in limited conditions of lower injection rates and smaller joint apertures. The difference between two approaches resulted from the facts that material separation (; bleeding) of cement grout, which was noticeable in higher injection rate and there could be a significant surface friction between the grout and joint planes, which are not included in the numerical simulations. Our numerical simulation, meanwhile, could well demonstrate that penetration length can be significantly over-estimated without considering a time-dependency of viscosity in a cement grout.

DC 스퍼터링 증착에 의한 AI 전극을 갖는 전계발광소자 제작 (Fabrication of the Electroluminescence Devices with Al electrode deposited by DC sputtering)

  • 윤석범
    • 한국전기전자재료학회논문지
    • /
    • 제13권5호
    • /
    • pp.376-382
    • /
    • 2000
  • We successfully fabricated OLED(Organic Light Emitting Diodes) with Al cathodes electrode deposited by the DC magnetron sputtering. The effects of a controlled Al cathode layer of an Indium Tin Oxide (ITO)/blended single polymer layer (PVK Bu:PBD:dye)/Al light emitting diodes are described. The PVK (Poly(N-vinylcarbazole)) and Bu-PBD (2-(4-biphenyl-phenyl)-1,3,4-oxadiazole) are used hole transport polymer and electron transport molecule respectively. We found that both current injection and electroluminescence output are significantly different with a variable DC sputtering power. The difference is believed to be due to the influence near the blended polymer layer/cathode interface that results from the DC power and H$\sub$2//O in a chamber. And DC sputtering deposition is an effective way to fabricate Al electrodes with pronounced orientational characteristics without damage occurring to metal-organic interface during the sputtering deposition.

  • PDF

고주파 가열조건에 따른 플라스틱 사출성형품의 표면특성 고찰 (An Investigation of Surface Appearance of an Injection-Molded Plastic Part with Various Induction Heating Conditions)

  • 손동휘;서영수;박근;이광우
    • Elastomers and Composites
    • /
    • 제44권4호
    • /
    • pp.358-365
    • /
    • 2009
  • 고주파 유도가열은 전자기 유도현상을 이용하여 금형표면을 비접촉 형태로 급속 가열할 수 있는 기술이다. 본 연구에서는 고주파 유도가열을 사용하여 사출금형의 표면을 급속으로 가열함으로써 휴대폰 사출성형품의 웰드라인을 제거하기 위한 연구를 수행하였다. 고주파 유도가열 실험을 통해 3초간의 가열로 금형 표면온도를 $143^{\circ}C$까지 가열함으로써 고분자수지의 유리전이온도 이상으로 급속 가열할 수 있음을 확인하였으며, 상기 고주파 유도가열을 적용하여 휴대폰 외장부의 사출성형을 실시하여 기존에 발생되었던 웰드라인을 성공적으로 제거할 수 있었다. 또한 유도가열시 가열조건(고주파 유도가열기 출력 및 가열시간)의 변화에 따른 웰드부 표면특성의 변화를 고찰하였다.

핵의학과에서 99mTc를 이용한 방사성의약품의 투여율 측정 비교 (Comparison of the Measurement of the Injection Rate of Radioactive Drugs Using 99mTc in Nuclear Medicine)

  • 손상준;박정규;정동경;박명환
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제43권2호
    • /
    • pp.97-103
    • /
    • 2020
  • This study was conducted by SPECT test at the Department of Nuclear Medicine at Daegu P Hospital from June 1 to October 31, 2019. A 3-way injection material was mounted among inpatients, and a syringe that was administered with radiopharmaceuticals using a 99mTc labeled compound was secured. We tried to find a way to calculate the dose rate of each radiopharmaceutical and increase the dose rate. As a result of measuring the radioactivity of radio-pharmaceuticals using 99mTc, the average dose rate of 60 syringes of all 6 radiopharmaceuticals was 93.26±7.34%, and the average dose rate of 99mTc-DMSA was 77.72%, 15.54% lower than the total. As a way to increase the dosing rate, the average dose rate diluted twice with the remaining amount of syringe after administration using normal saline increased to 95.37±6.99%, and the average dose rate diluted three times increased to 96.32±6.86%. The corresponding sample t-test to compare the pre- and post-dose rates at 1 dilution and 2 and 3 dilutions. As a result of the dilution and 2 dilutions, the probability of significance was 0.013, which was significantly higher than the dilution(p<0.05). The probability of significance for dilution 1 and dilution 3 was 0.016, which was significantly higher than in one dilution(p<0.05). The sum of the average dose rate using the experimental 3-way line was the highest with 98.85±1.42% of 99mTc, 99mTc-ECD 98.82±1.26%, 99mTc-Mebrofenin 98.82 ± 1.16%, 99mTc-HDP 98.74 ± 1.91%, 99mTc -MIBI was 98.69 ± 1.48%, and 99mTc-DMSA was the lowest with 86.47 ± 4.74%. When the number of dilutions was 5 times using 0.5 cc of normal saline and when the number of dilutions was 5 times using 1 cc of normal saline, when the number of dilutions was 5 times using 0.5 cc of normal saline and 1 cc of nomal saline When the number of dilutions was 5 times and the syringe volume was 0.5 cc, there was a statistically significant difference (p<0.05). There was a statistically significant difference when the number of dilutions was 5 times using 1 cc of nomal saline and the number of dilutions was 5 times using 1 cc of normal saline, and the syringe volume was 0.5 cc (p<0.05).

준설토 배송관로 내에서의 개질재 혼합효율에 대한 CFD 해석 (Experiment Study on Mixing Efficiency of Material for Improving Reclamation Soil Quality in Dredging Soil Pipeline using CFD)

  • 박병준;강병윤;정민철;신재렬
    • 대한토목학회논문집
    • /
    • 제35권5호
    • /
    • pp.1083-1096
    • /
    • 2015
  • 본 연구는 준설매립과정에서의 관중혼합 거동을 3차원 전산유체역학(CFD, Computational Fluid Dynamics)을 통해 분석한 연구로 준설토 배송관과 개질재 주입관이 합류하며 발생되는 이상(2-phase)유체의 혼합효율을 사전 평가함으로써 관중혼합 양상을 고찰하는 물리실험의 시행착오를 줄여 경제성을 증진시키는데 연구목적을 두고 있다. 수치해석에 이용된 CFD 코드는 OpenFOAM$^{(R)}$이고, 몇 가지의 기본가정 하에 배송관-주입관의 관경과 합류각을 변화시켜 총 18가지 경우에 대한 삼상(3-phase)유체 거동을 모의하였다. 그 결과 혼합효율에 대한 우열은 있었으나 그 차이는 미미하였고, 모든 경우에서 각 재료 사이의 경계층이 뚜렷하게 형성되었다. 이러한 현상을 극복하기 위한 보완 실험을 통해 경계층 파쇄(破碎)를 위한 관 내 부속 구조물이 고안되었으며, 본 연구에서 제시된 구조물은 단거리 배송관로 내 준설토와 개질재의 혼합효율을 크게 향상시킬 수 있음을 확인할 수 있었다.

봉침요법(蜂針療法)에 대(對)한 고찰(考察) -월간(月刊) $\ll$양봉계(養蜂界)$\gg$의 '봉침요법(蜂針療法)에 대(對)한 연구(硏究)'를 중심(中心)으로- (A Study on Bee Sting Therapy: Based on'Research on Bee Sting Therapy' of Monthly Yangbonggye)

  • 강중원;박동석;이상훈;이재동
    • Journal of Acupuncture Research
    • /
    • 제26권1호
    • /
    • pp.135-151
    • /
    • 2009
  • Objectives : To survey concept, meaning, and problems of beekeeper's bee sting therapy by reviewing and summarizing outline, indications, and clinical cases of 'Research on Bee Sting Therapy' described in Monthly Yangbonggye. Methods : As a narrative review, literature researches were carried out based on 'Research on Bee Sting Therapy' in Monthly Yangbonggye in the aspects of outline, indications, and clinical cases. In the concrete, outline was just summarized and described, and indications were categorized by recent version of international statistical classification of diseases and related health problems(ICD) of WHO(World health organization), and clinical cases were collected and summarized from the viewpoint of acupoints and methods of therapy. Results : 1. Bee sting therapy is to inject venom into skin by stimulating affected lesions or acupoints on meridian with sting of bee alive for therapeutic purposes. It can be divided into two classes(direct stimulation(直針法) and indirect stimulation(拔針法)) by the differences of methods, and is different from bee venom acupuncture therapy in the aspects of the way of extraction and injection. 2. In this material, bee sting therapy has 83 indications classified into 17 of 22 chapters of ICD. Among clinical cases, cases on neoplasm, goitre, lump, and haemorrhoids by direct stimulation were especially outstanding. 3. The therapeutic acupoints selected in bee sting therapy are mainly Ashi points(阿是穴), and partly acupoints on meridian(經穴), Extra points(經外奇穴), and New points(新穴) with careful consideration of patients' condition. Conclusions : Although bee sting therapy has more or less controversial points of diagnosis, treatment, and management of side effects, it is thought that the accumulated and inherited experiences from old times can be used as meaningful material by further experimental and clinical researches.

  • PDF

속가슴동맥 편 및 속가슴동맥-노동맥 복합이식편의 자유혈류 (Free Flow in Internal Thoracic Artery and Internal Thoracic Artery-Radial Artery Composite Graft)

  • 고광표;이미경;류대웅;이삼윤;최종범
    • Journal of Chest Surgery
    • /
    • 제37권10호
    • /
    • pp.839-844
    • /
    • 2004
  • 배경 및 목적: 속가슴동맥 편과 유리 노동맥 편의 Y-복합이식편은 관상동맥우회 술에 많이 이용된다. 이 연구의 목적은 속가슴동맥 편의 혈류를 증가시킬 수 있는 방법을 찾고 Y-복합이식편의 혈류역학을 알고자 함이다. 대상 및 방법: 관상동맥우회 술을 받은 15예에서 속가슴동맥 편을 두 가지 방법으로 처치하여 속가슴동맥 혈류량을 측정하였다. 7예에서는 혈관 외부에만 파파베린 액을 처치하였고 8예에서는 혈관 내로 파파베린 액을 주입하였다. 다른 18예에서는 속가슴동맥 편과 유리 노동맥 편으로 Y-복합이식편을 만들어 사용하였고 그 자유 혈류량과 두 분지의 혈류 변화를 조사하였다. 결과: 속가슴동맥 편의 혈관 내로 파파베린을 주사한 경우는 혈관외부에 파파베린을 처치한 경우보다 약 2배의 자유혈류량을 얻을 수 있었다(47.7$\pm$9.6 mL/min와 100.8$\pm$26.3 mL/min, p<0.001). Y-복합이식편의 양측을 다 연 상태에서 총 자유혈류량은 속가슴동맥 측만을 열었을 때나 노동맥 측만을 열었을 경우보다 훨씬 많았다(173.3$\pm$45.3 mL/min와 121.1$\pm$34.3 mL/min 혹은 117.5$\pm$42.8 mL/min, 각각 p<0.001). Y-복합이식편의 양 분지를 다 연 경우 양측의 혈류량은 차이가 없었다(85.4$\pm$27.8 mL/min와 87.9$\pm$42.4 mL/min, p=0.772). Y-복합이식편에서 한 측의 혈류량은 다른 측을 열 때보다 막을 때 훨씬 많았다. 결론: 속가슴동맥 편의 혈관 내에 파파베린 액을 주입하는 방법은 자유혈류량을 올릴 수 있는 매우 효과적인 방법이다. 속가슴동맥 편과 유리 노동맥 편의 Y-복합이식편은 속가슴동맥의 단독이식편보다 더 많은 자유혈류량을 보이며, Y-복합이식편의 한 측의 혈류량은 다른 측의 혈류량의 변화에 따라 변할 수 있다.

간호조무사의 근무환경인식과 성격성향에 관한 연구 (A Study on the Working Environment Recognition and the Caracter Disposition of Nurse Aides)

  • 이선이
    • 한국보건간호학회지
    • /
    • 제4권1호
    • /
    • pp.57-74
    • /
    • 1990
  • As the whole world took on the tendency to be highly industrialized, it became necessary for each field of occupation to require professional man power. Especially, since the World War n, the participation of woman power in economic activities has been continually increasing. In our country also, because of the rapid economic growth, change in the way of thinking of women as well as their participation in economic activities are increasing. Thus, woman power is being utilized in various occupational fields from simple physical labor to those that require high-professional skill. Also, continued economic development policies, by setting the establishment of welfare society as the ideology to be fulfilled, brought expansion of medical facilities in the field of public health and increase in man power in that field. As for the nursing specialists, more than 6000 have been being produced per year and as of the end of 1988, the total number of nursing specialists, reached 123, 115. Therefore, this study is done to recognize the professional knowledge and ability of nursing specialists, who take up $40\%$ of the total public-health related man power in our country, through evaluating their working environment and their disposition of character. This study, which was done from September 18th to September 30th 1989, took on the method of using formed questionnaires that had been amended and supplemented during two preparatory investigations, 322 of such questionnaires were used as an analytical material. In the formation of questionnaires, 12 questions were related to the working environment, and 26 in fortotal were related to the disposition of character, 5 for wise-disposition, 11 for activedisposition and 10 for open-disposition. The measuring method, which used 5-point-standard, allowed 5 points for affirmative recognition of the working environment, also 5 points for showing wise, active and open disposition of character and only point in opposite cases. Collected materials were analyzed, through an electronic calculation, into the average value, the standard deflection percentage, pearson corelative number and stepwise multiple regression. Summarizing the results from this study is as follows: 1. It was shown that the nursing specialists with the average of 3.07 have affirmative recognition of their working environment. The questions which drew most affirmative reaction were those concerning finance-management system such as hand, the questions that received negative reaction were those concerning communication method with the average of 2.49. Such reaction seems to have resulted from the cramming regulation by the superior authorities. Concerning the recognition of working environment in relation to employment conditions, more affirmative recognition is shown with the average of 3.14. at hospitals where injection job is not performed. The nursing specialists working at regular hospitals show more affirmative recognition than those at general hospitals, the averages being respectiely 3.16 and 3.03. 2. As for the disposition of character of the nursing specialists, active-disposition was highest with the average of 3.38, next was wise-disposition with 3.20 and the lowest was open-diposition with 2.98. Variable-wise disposition of character shows that wise-disposition and academic background are beneficially correlated by 0.12. Ative-disposition and open-disposition show correlation to the office term by respectively 0.16 and 0.21. In other words. better academic background leads to higher wise-disposition and more - experience results in higher active and open disposition. Also, the class that performs the injection job, in relation to the working environment, might cause change in the self-conceit that identify those in that class with the nurses; however, as far as professional judgment and action, in dealing with nursing job, being wise, active and open is concerned, not much effect is made. 3. The relation between the recognition of the working environment and the disposition of character is that more afirmative recognition- a nursing specialist has about her working environment, the higher the active-disposition becomes by 0.13. The degrees of the relation between recongnition of environment and wise and open dispositions show respectively 0.06 and -0.06 and -0.06. That is to say that when having more affirmative recognition of the working environment, a nursing specialist shows wise but closed disposition of character. This, howerver, didn't mean much statistically. When observing the results mentioned above, it is conspicuous that the nursing specialists, working as substitutes for the nurse at medical institutions of various sizes, get the feeling of being somewhat equal to the nurses and to some extent, fulfill their desire to accomplish their ego; however, as far as professional ability expansion if concerned. they lack wise and open dispositions. Therefore, considiering upon the results of this study, in medical institutions where the work of nursing specialists is regaded equal to that of the nurses, as a medical member who deals with human lives, it is desirable to make the nursing specialists work under the supervision of the nurses and to offer them continuous education to strengthen and improve their natural dispositions.

  • PDF

열가소성 의치상 레진과 첨상용 레진의 접착 강도에 저온플라즈마가 미치는 효과 (Nonthermal plasma on the shear bond strength of relining resin to thermoplastic denture base resin)

  • ;;송소연;박진홍;이정열;신상완
    • 대한치과보철학회지
    • /
    • 제56권3호
    • /
    • pp.199-205
    • /
    • 2018
  • 목적: 이 연구는 저온 플라즈마가 자가중합형 재이장용 레진과 주입형 열가소성 의치상 레진의 결합 강도에 미치는 영향을 다른 표면 처리 방법에서 평가하기 위함이다. 재료 및 방법: 네 가지 열가소성 의치상이 이 연구에서 사용되었다: Acrylic Resin (Acrytone), Polyester (Estheshot-Bright), Polyamide (Valplast), Polypropylene (Weldenz)에 다양한 표면처리를 시행하였다: 대조군, 저온플라즈마, Sandblasting, Sandblasting와 저온플라즈마. 표면 처리 후 모든 시편은 Tokuyama Rebase II를 이용하여 원형의 테플론 관에 접착되었다. 전단강도는 Universal testing machine을 통해 crosshead speed 1 mm/min으로 측정되었다. 통계 분석 방법으로는 이원분산분석을, 사후 검정 방법으로는 Tukey's test가 사용되었다. 결과: Acrytone이 다른 열가소성 의치상 레진 그룹에 비하여 통계적으로 유의한 수준에서 더 높은 전단강도를 보인 반면 Weldenz는 가장 낮은 값을 나타냈다. Sandblast와 저온플라즈마를 순차적으로 시행한 조건에서 모든 레진 그룹 중 통계적으로 유의한 수준에서 가장 높은 전단강도 값을 나타냈다. 결론: 열경화성 의치상 레진과 재이장용 레진 사이의 전단강도에 저온플라즈마는 제한된 효과를 나타내었으며, sandblasting 처리와 함께 처리되었을 때 두 재료간 전단강도는 향상되었다.