• 대한소아치과학회지
• /
• 제38권1호
• /
• pp.44-50
• /
• 2011

미성숙 영구치의 치수가 괴사되면, 치근 형성이 더 이상 이루어지지 않아 치근벽이 매우 얇고, 치근단공이 열려 있어 근관치료를 시행하기가 매우 어렵다. 치수가 괴사되고, 치근단 병소가 있는 치아의 근관치료를 시행할 때 가장 중요한 것은 감염된 근관계를 소독하는 것이다. 이러한 소독은 근관 내 기계적인 기구 조작, 근관 세척, 근관 내 약제를 통해서 이루어질 수 있는데, 최근 ciprofloxacin, metronidazole, minocycline의 세 가지 항생제 조합을 이용하여 근관 내 병원균을 제거하고, 치수의 재혈관화를 도모하여, 치근의 지속적인 성장을 유도한 연구와 증례가 많이 보고되고 있다. 이러한 재생적인근관 치료는 미성숙 영구치를 치료함에 있어서 통법적인 치근단형성술보다 보존적인 치료법으로서 널리 이용될 것이라 사료된다. 본 증례는 치외치의 교두파절로 인하여 치수가 괴사되고, 치근단 병소가 생긴 미성숙 영구치를 주소로 내원한 두 환아에 대하여 세 가지 항생제 조합을 근관 내 약제로 이용하여 치료한 바, 성공적인 치료결과를 보여 이를 보고하는 바이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.3-8
• /
• 1998

This research is to examine the relationships between viscosity and fluidity according to binders in the super flowing concrete. And this research is described with respect to rheology concept, confined water ratio($\beta_p$) of binders in paste and mortar, also investigated experimentally the relationships between the relative flowing ratio ($\Gamma_m$) and the funneling velocity ratio($R_m$) on the mortar state according to the water binder ratio(W/B) and the dosage of the superplasticizer. From the confined water ratio tests, it is found that $\beta_p$ of the class C fly ash is higher than that of the class F fly and limestone in paste and mortar, therefore class F fly ash and limestone and super flowing concrete. The result of test, the optimum mix condition to the compactibility if satisfied when the replacement ratio is 30% and $K_p$ is 0.8 for the case of fly ash and limestone.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.19-28
• /
• 1999

This study treated self-compacting high Performance concrete as two Phase materials of Paste and aggregates and examined the effect of powder and aggregates on self-compacting high performance, since fluidity and segregation resistance of fresh concrete are changed mainly by paste. To improve the fluidity and self-compactibility of concrete, optimum powder ratio of self-compacting high performance concrete using fly ash and blast-furnace slag as powders were calculated. This study was also designed to provide basic materials for suitable design of mix proportion by evaluating fluidity and compactibility by various volume ratios of fine aggregates, paste, and aggregates. As a result, the more fly ash was replaced, the more confined water ratio was reduced because of higher fluidity. The smallest confined water ratio was determined when 15% blast-furnace slag was replaced. The lowest confined water ratio was acquired when 20% fly ash and 15% blast-furnace slag were replaced together. The optimum fine aggregates ratio with the best compactibility was the fine aggregate ratio with the lowest percentage of void in mixing coarse aggregate and fine aggregate In mixing the high performance concrete. Self-compacting high performance concrete with desirable compactibility required more than minimum of unit volume weight. If the unit volume weight used was less than the minimum, concrete had seriously reduced compactibility.

• 한국수산과학회지
• /
• 제30권1호
• /
• pp.79-87
• /
• 1997

A study on the processing method of anchovy hydrolysate paste (AHP) was carried out to improve the sensory quality of salted and fermented fish. Homogenized whole anchovy was hydrolyzed using commercial pretenses, Complex enzyme-2000 (CE, Pacific Chem. Co.) and Alcalase (AL, Novo), in a cylindrical vessel with 4 baffle plates and 6-bladed turbine impeller. Optimal pH, temperature, and enzyme concentration for the hydrolysis with CE and AL were $7.0,\;52^{\circ}C,\;7\%$, and $8.0,\;60^{\circ}C,\;6\%$, respectively. The rational amount of water for homogenization, agitation speed, and hydrolyzing time were $100\%\;(w/w)$, 100 rpm, and 210 min, respectively. To make the hydrolysate to paste type, it was effective to mix the additives, such as starch, soybean protein, agar, and carrageenan gum to the hydrolysate 5 min before the end of boiling at $100^{\circ}C$ for 30 min. Minimal NaCl concentration for long-term preservation was $15\%$, and this could be reduced to $12\%$ by adding $5\%$ of KCl. yield of the AHP based on the total nitrogen content was $94.6\~97.0\%,\;and\;86.0\~89.2\%$, of the nitrogen was amino nitrogen. Salinity, pH and histamine content of the AHP prepared with $12\%$ NaCl and $5\%$ KCl were $9.3\~9.9\%,\;6.1\~6.2$, and below 13 mg/100 g, respectively. The AHP was stable at $26{\pm}3^{\circ}C$ for 60 days on bacterial growth, and addition of $0.05\%$ of rosemary (Herbalox) extract was effective to inhibit the lipid oxidation of the AHP during storage.

• 한국식품조리과학회지
• /
• 제30권2호
• /
• pp.146-152
• /
• 2014

This study surveyed consumers' sensory liking ratings of 3 types of developed brown rice products (brown rice nut waffles, Kimchi and tuna rice ball, sweet red-bean paste rice ball) and analyzed the drivers for liking or disliking the brown rice products. Each brown rice product had a brown rice to brown rice powder ratio of either: 100:0; 80:20; or 50:50. Forty consumers evaluated the acceptance of brown rice products on a 9-point hedonic scale and gave comments regarding liking or disliking each product. The results of the preference investigation analysis showed subjectivity depending on the brown rice product and the respondents' genders and ages. For brown rice nut waffles was affected by gender, age, and brown rice powder mixing ratio (p < 0.05). The variables "liking the aroma"; "liking the delicate flavor"; "liking the chewiness"; "liking the moistness"; "liking the softness"; "liking the harmony"; "liking the aftertaste" and "overall acceptability" did not differ significantly with the Kimchi and tuna rice ball. For the sweet red-bean paste rice ball product, the rates of liking the chewiness, stickiness, moistness, and softness of the 0% brown rice powder mix were all higher (p < 0.05) than were the rates of liking those same qualities in the 50% brown rice powder mix. Among all brown rice products, there were high correlations between the overall acceptability, liking the saltiness, liking the aroma, and liking the harmony. A preference investigation analysis showed that the brown rice product fillings were key factors to the products' overall acceptability.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.337-351
• /
• 2016

This paper presents the properties of pervious concrete containing high-calcium fly ash. The water to binder ratios of 0.19, 0.22, and 0.25, designed void ratios of 15, 20, and 25%, and fly ash replacements of 10, 20, and 30% were used. The results showed that the use of fly ash as partial replacement of Portland cement enhanced the mixing of paste resulting in a uniform mix and reduced amount of superplasticizer used in the mixture. The compressive strength and flexural strength of pervious concrete were slightly reduced with an increase in fly ash replacement level, while the abrasion resistance increased due mainly to the pozzolanic and filler effects. The compressive strength and flexural strengths at 28 days were still higher than 85% of the control concrete. The aggregate size also had a significant effect on the strength of pervious concrete. The compressive strength and flexural strength of pervious concrete with large aggregate were higher than that with small aggregate.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.185-206
• /
• 2023

This article aimed to explore the optimization of mineral admixtures and retarding admixture for high-performance concrete. In essence, fresh concrete can be regarded as a mixture in which both coarse and fine aggregates are suspended in a cement-based matrix paste. Based on this view, the test procedure was divided into three progressive stages of binder paste, mortar, and concrete to explore their rheological behavior and mechanical properties respectively. At each stage, there were four experimental control factors, and each factor had three levels. In order to reduce the workload of the experiment, the Taguchi method with an L9(3⁴) orthogonal array and four controllable three-level factors was adopted. The test results show that the use of the Taguchi method effectively optimized the composition of high-performance concrete. The slump of the prepared concrete was above 18 cm, and the slump flow was above 50 cm, indicating that it had good workability. On the other hand, the 28-day compressive strength of the hardened concretes was between 31.3-59.8 MPa. Furthermore, the analysis of variance (ANOVA) results showed that the most significant factor affecting the initial setting time of the fresh concretes was the retarder dosage, and its contribution percentage was 62.66%. On the other hand, the ANOVA results show that the most significant factor affecting the 28-day compressive strength of the hardened concretes was the water to binder ratio, and its contribution percentage was 79.05%.

• 한국건축시공학회지
• /
• 제2권4호
• /
• pp.145-152
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of mortar and fineness modulus of sand on the properties of fresh mortar. The effect of water-binder ratio. sand-binder ration. contents of ggbs (by mass of total cementitious materials). and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the fellowing conclusions can be drawn: (1) The mixing time needed for high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.

• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.121-127
• /
• 2011

이 연구는 친환경적인 콘크리트 결합재로서 천연황토의 적용 가능성을 알아보기 위해 지오폴리머 반응법(geopolymerization)으로 얻어진 천연황토 경화체의 특성을 분석하였다. 이를 위해 천연황토와 알칼리 용액을 1 : 0.55 비율로 혼합하여 천연황토 페이스트를 제조하고 $60^{\circ}C$와 $20^{\circ}C$에서 양생시켜 재령에 따른 압축강도와 중량변화를 측정하였다. 또한, X-ray 회절분석(XRD)을 통해 반응 생성물을 확인하고 그 형상을 주사전자현미경(SEM)으로 촬영하였으며 수은압입법으로 경화체의 공극률을 분석하였다. 그 결과, 지오폴리머 반응법으로 얻어진 천연황토 경화체는 액상 규산나트륨($Na_2SiO_3$)와 8 M 수산화나트륨(NaOH) 수용액을 1:4.5비율로 제조한 알칼리 용액을 사용하고 $60^{\circ}C$에서 7일간 양생하였을 때 압축강도 29.1 MPa을 발현하는 천연황토 페이스트의 제조가 가능하였다. 또한, 개별 양생온도($20^{\circ}C$, $60^{\circ}C$)에서 압축강도 발현은 수분증발 비율에 따라 유사한 경향을 나타내므로 수분증발에 유리한 높은 양생 온도에서 반응을 유도하는 것이 조기 강도 발현에 유리한 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.78-79
• /
• 2013

As a part of study to maximize the amount used of the ground granulated blast-furnace slag, the study deals with setting properties of paste that is mixed the ground granulated blast-furnace slag with CaO-Al₂O₃ based inorganic blinder. The results of the experiment show that the setting time is most fast in the mix of 25% rate of CaO-Al₂O₃ based inorganic blinder. It is generally needed 2 hours for work time in precast concrete products. In this study, this requirement is achieved when using the retarder of 0.5%.