KCI Concrete Journal

Korea Concrete Institute (한국콘크리트학회)
권호 표지

Effect of Powder and Aggregates on Compactability of High Performance Concrete

  • Published : 1999.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study treated self-compacting high Performance concrete as two Phase materials of Paste and aggregates and examined the effect of powder and aggregates on self-compacting high performance, since fluidity and segregation resistance of fresh concrete are changed mainly by paste. To improve the fluidity and self-compactibility of concrete, optimum powder ratio of self-compacting high performance concrete using fly ash and blast-furnace slag as powders were calculated. This study was also designed to provide basic materials for suitable design of mix proportion by evaluating fluidity and compactibility by various volume ratios of fine aggregates, paste, and aggregates. As a result, the more fly ash was replaced, the more confined water ratio was reduced because of higher fluidity. The smallest confined water ratio was determined when 15% blast-furnace slag was replaced. The lowest confined water ratio was acquired when 20% fly ash and 15% blast-furnace slag were replaced together. The optimum fine aggregates ratio with the best compactibility was the fine aggregate ratio with the lowest percentage of void in mixing coarse aggregate and fine aggregate In mixing the high performance concrete. Self-compacting high performance concrete with desirable compactibility required more than minimum of unit volume weight. If the unit volume weight used was less than the minimum, concrete had seriously reduced compactibility.

Keywords

References

  1. Proceedings of the Japan Concrete Institute v.14 no.1 Fundmental Study on the Self-Compacting Property of the High Fluid Concrete Hiromi Fujiwara;Yoshihide Shimoyama;Rokuro Tomita;Hiroyasu Kubota
  2. Proceedings of the Japan Concrete Institute v.14 no.1 Studies on Self-Consolidating Concrete Containing Segregation Controlling Admixture Masahiro Yurugi;Noboru Sakata;Minoru Iwai
  3. Giboudou High-Performance of Concrete Okamura, H. (et al.)
  4. Journal of the Korea Concrete Institute v.6 no.1 Research and Application of High Performance Concrete Byun, K. J.
  5. Proceedings of the Japan Concrete Institute v.18 no.1 The influence of Fine Aggregate Grading on Workability of High-Fluidity Concrete Eiji Sudo;Yoshihiro Masuda;Shinji Gomi
  6. Sankaidou Science and Technique of Concrete Murata (et al.)
  7. Journal of the Korea Concrete Institute v.7 no.5 A Development and Practicality Study of High Performance Concrete Kwon, Y. H.;Park, C. L.
  8. Proceeding of the Korea Concrete Institute v.8 no.2 An Experimental Study on the Manufacturing and Application of High-Workable Concrete Yoon, J. H.;Cha, T. H.;Hong, S. J.;Kwon, G. H.
  9. Proceeding of the Korea Concrete Institute v.8 no.2 The Study on the Mix Design of the Super Flowing Concrete Kwon, Y. H.;Lee, S. S.;Ahn, J. H.;Park, C. L.
  10. Proceeding of the Korea Concrete Institute v.8 no.2 The Experimental Study on the Influence of Relation between Cement Paste and Aggregate Volume to Effect the High Flowing and Engineering Propeties of High Flowing Concrete Kim, G. Y.;Choi, H. Y.;Kim, H. K.;Kim M. H.
  11. A study of the basic physical propertis of super workable concrete v.13 no.1 Takefumi Shindoh;Yasunori Matsuoka;Somnuk Tangtermsirikul;Jun Sakamoto
  12. Journal of the Korea Concrete Institute v.5 no.2 Experimental Study on the Development of High Performance Concrete (Propertles of Super-flowing Concrete) Cho, I. H.;Han, C. H.;Noh, J. H.;Jaung, J. D.