• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.77-84
• /
• 2020

This study is apply 3D spatial information per traditional landscape space by comparing spatial information data created using a small drone and 3D scanner used for 3D spatial information construction for efficient preservation and management of traditional landscaping space composed of areas such as scenic sites and traditional landscape architectures. The analysis results are as follows. First, aerial photogrammetry data is less accurate than 3D scanners, but it was confirmed to be more suitable for monitoring landscape changes by reading RGB images than 3D scanners by texture mapping using digital data in constructing orthographic image data. Second, the orthographic image data constructed by aerial photogrammetry in a traditional landscaping space consisting of a fixed area, such as Gwanghalluwon Garden, produced visually accurate and precise results. However, as a result of the data extraction, data for trees, which is one of the elements that make up the traditional landscaping, was not extracted, so it was determined that 3D scanning and aerial surveying had to be performed in parallel, especially in areas where trees were densely populated. Third, The surrounding trees in Soswaewon Garden caused many errors in 3D spatial information data including topographic data. It was analyzed that it is preferable to use 3D scanning technology for precise measurement rather than aerial photogrammetry because buildings, landscaping facilities and trees are dense in a relatively small space. When 3D spatial information construction data for a traditional landscaping space composed of area using a small drone and a 3D scanner free from temporal and spatial constraints and compared the data was compared, the aerial photogrammetry is effective for large site such as Hahoe Village, Gyeongju and construction of a 3D space using a 3D scanner is effective for traditional garden such as Soswaewon Garden.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.744-749
• /
• 2018

Informatization and visualization technology for real space is a key technology for construction of geospatial information. Three-dimensional (3D) modeling is a method of constructing geospatial information from data measured by various methods. The 3D laser scanner has been mainly used as a method for acquiring digital elevation data. On the other hand, the unmanned aerial vehicle (UAV), which has been attracting attention as a promising technology of the fourth industrial revolution, has been evaluated as a technology for obtaining fast geospatial information, and various studies are being carried out. However, there is a lack of evaluation on the quantitative work efficiency and data accuracy of the data construction technology for 3D geospatial modeling. In this study, various analyses were carried out on the characteristics, work processes, and accuracy of point cloud data acquired by a 3D laser scanner and an unmanned aerial vehicle. The 3D laser scanner and UAV were used to generate digital elevation data of the study area, and the characteristics were analyzed. Through evaluation of the accuracy, it was confirmed that digital elevation data from a 3D laser scanner and UAV show accuracy within a 10 cm maximum, and it is suggested that it can be used for spatial information construction. In the future, collecting 3D elevation data from a 3D laser scanner and UAV is expected to be utilized as an efficient geospatial information-construction method.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.585-588
• /
• 2003

This study attempts to develop a skeleton model to link construction schedule and 3D object for drawings in 4D system. Generally, the construction schedule and 3D object can be linked in 4D system by imported files which are made in specific S/Ws such as CAD S/W and scheduling S/W. Those methods have a difficulties for operating 4D data because extra work needs to link 4D data for each activity. This study develops a 4D model which the 4D data can be self-generated within the system. The suggested model can reduce the initial input data for new project by integrating schedule and 3D object in 4D system.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.571-576
• /
• 2016

3D printing has recently been used in various fields. Among various applications, 3D face data must be generated for 3D face printing. A laser scanner is used to acquire 3D face data, but there is a restriction that a person should not move during scanning. In this paper, we propose a 3D face modeling method based on a single image and a face transformation system to use the generated 3D face for virtual cosmetic surgery. We have defined facial feature points from the 3D face database for 3D face data generation. After extracting feature points from a single face image, 3D face of the input face image is generated corresponding to the 3D face feature points defined from the 3D face database. After 3D face modeling, 3D face modification part is applied for use such as virtual cosmetic surgery.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.49-62
• /
• 2022

Borehole Data is geotechnical information provided so that workers can safely perform construction at the field. It creates 3D data and supports viewing as a 3D image. Currently, all Korean companies that develop programs using 3D visualization use the MVS program developed by C Tech Development Corporation. However, the MVS program is a commercial program, and it is difficult to use MVS in 3D related programs developed by Korean Companies. In this paper, we propose to develop a program that can replace MVS to generate a 3D stratum model from clustered borehole information using Python's Gempy open-source. The 3D stratum model program can creates point data for each stratum and can creates a surface for each stratum through interpolation. Then, the 3D stratum model program is completed by merging the surfaces of each stratum. It was confirmed that there was no difference when a 3D model was created and compared with the MVS program and the proposed program from the borehole data of a Goyang area.

• Journal of Information Technology and Architecture
• /
• v.11 no.4
• /
• pp.495-504
• /
• 2014

This paper present a strategy of intellectual property acquisition and core technology development direction using analysis of 2D to 3D video conversion technology patent data. As a result of analysis of trends in patent 2D to 3D technology, it is very promising technology field. Using a strategic patent map using research of patent trend, you will keep ahead of the competition in 2D3D image data conversion market.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.330-337
• /
• 2022

Research on object detection algorithms using 2D data has already progressed to the level of commercialization and is being applied to various manufacturing industries. Object detection technology using 2D data has an effective advantage, there are technical limitations to accurate data generation and analysis. Since 2D data is two-axis data without a sense of depth, ambiguity arises when approached from a practical point of view. Advanced countries such as the United States are leading 3D data collection and research using 3D laser scanners. Existing processing and detection algorithms such as ICP and RANSAC show high accuracy, but are used as a processing speed problem in the processing of large-scale point cloud data. In this study, PointNet a representative technique for detecting objects using widely used 3D point cloud data is analyzed and described. And RandLA-Net, which overcomes the limitations of PointNet's performance and object prediction accuracy, is described a review of detection technology using point cloud data was conducted.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.56-61
• /
• 2004

As the size and dimension of target problems in the field of computational engineering including CFD gets bigger and higher, it is needed to have more efficient and flexible data visualization environment in terms of software and hardware. Even though it is still manageable to use a mouse in controlling 3-dimensional data visualization, it would be beneficial to use 3-D input device for 3-D visualization. 'Data Glove' is one of the best 3-D input devices, because human hands are best tools understanding 3-D space. Signals coming from 'Data Glove' are analog and very sensitive to finger motions, so we decided to use a digital filter. This paper describes our experience and benefits of using data glove in controlling 3-Dimensional Postprocess Software.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.669-676
• /
• 2010

Visualization requires for effective analysis of the spatial data collected by various sensors. The best way to convey 3D digital spatial information which is modeling of the real world to the users, realistic 3D visualization and display technology. Since most of the display is based on 2D or 2.5D projection to the plane, there is limitation in representing real world in 3D space. In this paper, data from airborne LiDAR for topographic mapping, Flashi-LiDAR as emerging sensor with great potential to 3D data acquisition, and multibeam echo-sounder for underwater measurement, were stereoscopically visualized. 3D monitors are getting popular and could be information media and platform in geoinformatics. Therefore, study on creating 3D stereoscopic contents of spatial information is essential for new technology of stereo viewing systems.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.645-648
• /
• 2008

Due to the rapid increase super high-rise buildings and multi-complex spaces, the space of a staged a very complex and variety of situations occur in the space of the building. The management is still based on limited information obtained by the administrator depends on the decision is made. However, the ability of human beings during a limited time, analysis limited information, and there is a limit to take the appropriate action and situation. To overcome these limitations high information technology that can be fused to take advantage of ubiquitous system is to offer. The aim of this study is on object-oriented 3D data and collected information about the status of the 3D data extraction, to exchange data between systems, the use of object-oriented 3D data, and I studied common space information of a multi-use facilities extracted from 3D CAD information to send to the GIS system.