• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.174-178
• /
• 2009

Purpose: We introduce arthroscopic assisted core decompression for humeral head osteonecrosis. Operative technique: After diagnostic shoulder arthroscopy is performed using posterior and anterior portal, we make a 2 cm lateral skin incision approximately 3 cm distal to 1/3 of lateral margin of the acromion and place short gray cannula to prevent adjacent soft tissue injury when insert guide pin. Under C-arm fluoroscopic and arthroscopic guidance, 3 to 4 guide pins are inserted toward the necrotic area. Then we perform drilling using 7.0 mm reamer. Conclusion: We believe this technique is a less invasive approach and avoids the complications comparing to deltopectoral approach. Arthroscopic assisted core decompression is an effective procedure in management of early stage of the humeral head osteonecoris.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.22-30
• /
• 2011

Recently, the rising demand for intelligent video surveillance system leads to high-performance face recognition systems. The solution for low-resolution images acquired by a long-distance camera is required to overcome the distance limits of the existing face recognition systems. For that reason, this paper proposes a hardware design of an image resolution enhancement algorithm for real-time intelligent video surveillance systems. The algorithm is synthesizing a high-resolution face image from an input low-resolution image, with the help of a large collection of other high-resolution face images, called training set. When we checked the performance of the algorithm at 32bit RISC micro-processor, the entire operation took about 25 sec, which is inappropriate for real-time target applications. Based on the result, we implemented the hardware module and verified it using Xilinx Virtex-4 and ARM9-based embedded processor(S3C2440A). The designed hardware can complete the whole operation within 33 msec, so it can deal with 30 frames per second. We expect that the proposed hardware could be one of the solutions not only for real-time processing at the embedded environment, but also for an easy integration with existing face recognition system.

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.286-293
• /
• 2012

The resistance to Tobamovirus in Capsicum spp. has been known to be controlled by five different alleles ($L^0$, $L^1$, $L^2$, $L^3$, and $L^4$) of L locus on the telomere of long arm of pepper chromosome 11. To develop a set of molecular markers differentiating all the alleles of L locus, we used five pepper differential hosts including Capsicum annuum Early California Wonder (ECW, $L^0L^0$), C. annuum Tisana ($L^1L^1$), C. annuum Criollo de Morelos 334 (CM334, $L^2L^2$), Capsicum chinense PI 159236 ($L^3L^3$), and Capsicum chacoense PI 260429 ($L^4L^4$). Developing a series of CAPS or SCAR markers specifically linked to the alleles was allowed by the sequence comparison of PCR amplicons of the $L^3$-linked markers (189D23M, A339, and 253A1R) and BAC sequences (FJ597539 and FJ597541) in the pepper differentials. Genotypes deduced by these markers in 48 out of 53 $F_1$ hybrids of commercial pepper varieties were consistent with their phenotypes by bioassay using Tobamovirus pathotypes ($P_0$, $P_1$, and $P_{1,2$). Consequently, these markers can be useful to differentiate L alleles and for breeding Tobamovirus resistance in pepper with marker-assisted selection.

• Women's Health Nursing
• /
• v.10 no.4
• /
• pp.301-310
• /
• 2004

Purpose: The purpose of this study was to develop an exercise program for postmastectomy patients. Method: This study was conducted from October, 2003 to June, 2004. The exercise program was developed based on literature review and needs assessment using focus group interviews. The subjects for the focus group interview consisted of 11 patients, 13 recovering patients, and 20 nurses from 3 hospitals. Development of the program was proceeded with analysusm design and development steps. Result: The results of the needs assessment using the focus group interview showed that the exercise program was imperative for postmastectomy patients. Based on the results, a home video tape containing 3 steps, was developed. Each step includes warming-up, stretching, the main exercise, and cool-down. Steps 2 and 3 include exercises with an elastic band, and an elastic ball. The program was modified after conducting a pre-test. A self-checklist including shoulder mobility, hand strength, arm volume and subjective comments on how they feel will be used before and after the exercise program. Conclusion: The exercise program will improve breast cancer patients' quality of life and their physical well-being. Further studies are recommended to test the effectiveness of the exercise program.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.3
• /
• pp.229-238
• /
• 2015

This study was conducted to develop electronic control system of weeding implement that can operated at various areas such as slope land and inclined road side. The weeding implement consists of five main parts; the electronic control system, the hydraulic system, the main frame, the boom and arm mechanism, and the rotary type weeder. And the weeding implement was developed to be attached by three-point hitch of tractor considering the use of electronic control system. As a result, the electronic control test was conducted with the weeding implement attached to tractor in slope land. The results of the electronic control system test showed satisfactory weeding performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.156-163
• /
• 2015

In the using of FBG(Fiber Bragg Grating) developed in home land, we designed and manufactured united FBG acoustic transducers the first in Korea. they are being applied to multi-point signal detection of FBG Hydrophone used Hopper WDM(national patent NO 10-1502954) in the underwater. On united FBG transducers manufactured, we made an demonstrated on respective frequency response peculiarities in the underwater and analyzed the special characters. As the experimental result on frequency response peculiarities, we made it possible underwater acoustic detection on united FBG acoustic transducers type to maximum 30Hz~2.5KHz. it's the optimum conditions of 1.2KHz frequency in detection. And for the purpose of realization on multi-point signal detection on wide scope in the underwater, in the using of WDM(Wavelength Division Multiplexing) method and passive band-pass filter system, established arrays system and succeeded in multi-point underwater acoustic signal detection to the frequency 200Hz~1.3KHz out of the two united type FBG transducers. Additionally, it would be possible directivity detection for the object of its source as the intensity of detection signal varies with the sound source's direction and angle. From now on we prepared a new moment on the practical use study on FBG hydrophone in the future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.253-261
• /
• 2014

In this paper, vibration analysis of power differential gear train for 2.5MW wind turbine system is analyzed. which system is composed of two planetary gear set, one helical gear set and main shaft that connected by flange. Planetary gear set, helical gear set, main shaft are modeled in MASTA program and housing, torque arm, carrier, flange components are modeling by finite element method. Each models are combined by component mode superposition. To analysis of natural vibration characteristic about 2.5MW wind turbine gear train was performed and check about critical speed with wind load, mass unbalance, angle misalignment excitation frequency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3227-3235
• /
• 2011

In this paper, a relational embedded DBMS was designed and a prototype 'Miracle' RDBMS (MDB) was developed. MDB is written in C and works on Unix, Linux and Windows platforms locally. It accesses database through SQL interfaces and API functions and uses $B^+$ tree index. It guarantees ACID in transactions and supports low concurrency control and processes SQL statements on a single table. To evaluate the performance of MDB on an ARM board EZ-S3C6410 and to compare the performance of MDB with that of SQLite, an experiment was carried out to estimate processing times for insertion, selection, update and deletion operations. The result shows that the average times for selections and insertions in MDB were 38.46% and 22.86% faster than those in SQLite, respectively, but the average times for updates and deletions in SQLite were 28.33% and 26.00% faster than MDB, respectively, This experiment shows that fetching data from database and sending data to database in MDB is faster than in SQLite, but $B^+$ tree index is implemented more effectively in SQlite than in MDB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.51-58
• /
• 2007

This paper presented an adaptive pipeline architecture for a high-performance and low-power asynchronous processor. The proposed pipeline architecture employed a stage-skipping and a stage-combining scheme. The stage-skipping scheme can skip the operation of a bubble stage that is not used pipeline stage in an instruction execution. In the stage-combining scheme, two consecutive stages can be joined to form one stage if the latter stage is empty. The proposed pipeline architecture could reduce the processing time and power consumption. The proposed architecture supports multi-processing in the EX stage that executes parallel 4 instructions. We designed an asynchronous microprocessor to estimate the efficiency of the proposed pipeline architecture that was synthesized to a gate level design using a $0.35-{\mu}m$ CMOS standard cell library. We evaluated the performance of the target processor using SPEC2000 benchmark programs. The proposed architecture showed about 2.3 times higher speed than the asynchronous counterpart, AMULET3i. As a result, the proposed pipeline schemes and architecture can be used for asynchronous high-speed processor design

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.993-999
• /
• 2008

A girder height limitation is the critical parameter for rapid construction of bridge deck and construction space limitation especially in urban area such as high population area and high density habitats. A standard post-tensioned I-shaped concrete girder usually demands relatively higher girder height in order to retain sufficient moment arm between compression force and tensile force. To elaborate this issue, a small U-shaped section with wide flanges can be used as a possible replacement of I-shaped standard girder. This prestressed concrete box girder allows more flexible girder height adjustment rather than standard I-shaped post-tensioned girder plus additional torsion resistance benefits of closed section. A 30m-long, 1.7m-high and 3.63m-wide actual small prestressed concrete box girder is designed and a laboratory test for its static behaviors by applying 6,200kN amount of load in the form of 4-point bending test was performed. The load-deflection curve and crack patterns at different loading stage are recorded. In addition, to extracting the dynamic characteristics such as natural frequency and damping ratio of this girder, several excitation tests with artificial mechanical exciter with un-symmetric mass are carried out using operational frequency sweep-up. Nonlinear finite element analysis of this 4 point bending test under monotonic static load is investigated and discussed with aids of concrete damaged plasticity formulation using ABAQUS program.